대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제33권4호
  • /
  • Pages.353-359
  • /
  • 2009
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

굽힘하중 하의 벌크형 와이어 직조 카고메 트러스 중간재를 갖는 샌드위치 판재의 기계적 거동

Finite Element Simulation of Behavior of WBK Cored Sandwich Panels Subjected to Bending Loads

  • 최지은 (전남대학교 자동차연구소) ;
  • 강기주 (전남대학교 기계시스템공학부)
  • 발행 : 2009.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Wire-woven Bulk Kagome (WBK) is a new truss type cellular metal fabricated by systematic assembling of helical wires in six directions. In this work, the experiments of mechanical behaviors of WBK cored sandwich panels subjected to bending load were performed and the results were compared with those by the corresponding analytic solutions. And also, finite element simulations were performed to validate the optimal design according to the analytic solutions. It is found the sandwich panel with WBK core performed excellently in terms of energy absorption and deformation stability after the peak point as well as the load capacity.

키워드

참고문헌

  1. Bart-Smith, H., Hutchinson, J.W., Evans, A.G., 2001,Bart-Smith, H., Hutchinson, J.W., Evans, A.G., 2001,'Measurement and Analysis of the Structural Performance of Cellular Metal Sandwich Construction,' Int. J. of Mechanical Sciences, Vol. 43, pp.1945-1963,' Int. J. of Mechanical Sciences, Vol. 43, pp.1945-1963 https://doi.org/10.1016/S0020-7403(00)00070-9
  2. Deshpande, V.S. and Fleck, N.A., 2003, 'Energy Absorption of an Egg-Box Material,' J. of the Mechanics and Physics of Solids, Vol.51, pp.187-208 https://doi.org/10.1016/S0022-5096(02)00052-2
  3. Wadley, H.N.G., Fleck, N.A., and Evans, A.G., 2003,'Fabrication and Structural Performance of Periodic Cellular Metal Sandwich Structures,' Composite Science and Technology, Vol.63, pp.2331-2343 https://doi.org/10.1016/S0266-3538(03)00266-5
  4. Sypeck, D.J. and Wadley, H.N.G., 2001, 'Cellular Metal Truss Core Sandwich Structures,' Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001) edited by J. Banhart, M.F. Ashby, N.A. Fleck, pp.381-386 https://doi.org/10.1002/1527-2648(20021014)4:10<759::AID-ADEM759>3.0.CO;2-A
  5. Zok, F. W., Waltner, S. A., Wei, Z., Rathbun, H. J., McMeeking, R. M. and Evans, A. G., 2004, 'A Protocol for Characterizing the Structural Performance of Metallic Sandwich Panels: Application to Pyramidal Truss Cores,' Int. J. of Solids and Strutures, Vol.41, pp.6249-6271 https://doi.org/10.1016/j.ijsolstr.2004.05.045
  6. Deshpande, V. S., Fleck, N. A. and Ashby, M. F., 2001, 'Effective Properties of the Octet-Truss Lattice Material,' J. of the Mechanics and Physics of Solids, Vol. 49, pp.1747-1769 https://doi.org/10.1016/S0022-5096(01)00010-2
  7. Hyun, S., Karlsson, A. M., Torquato, S. and Evans, A. G., 2003, 'Simulated Properties of Kagome and Tetragonal Truss Core Panel,' Int. J. of Solids and Structures, Vol. 40, pp.6989-6998 https://doi.org/10.1016/S0020-7683(03)00350-0
  8. Lee, Y. H., Lee, B. K., Jeon, I. and Kang, K. J., 2007a. 'Wire-woven bulk Kagome (WBK) truss cores.' Acta Materialia 55, pp. 6039-6400 https://doi.org/10.1016/j.actamat.2007.07.023
  9. Wicks, N. and Hutchinson, J. W., 2001, 'Optimal Truss Plates,' Int. J. of Solids and Structures, Vol. 38, pp. 5165-5183 https://doi.org/10.1016/S0020-7683(00)00315-2
  10. Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchison, J.W., and Wadley, H.N.G. 2001, Metal Foams: A Design Guide, Butterworth Heinemann, pp.116-120
  11. Lee, Y. H. and Kang, K. J., 2008. 'An optimal Design of Sandwich Panels with Wire-woven Bulk Kagome Cores,' Trans. of the KSME(A), Vol. 32, pp.782-787 https://doi.org/10.3795/KSME-A.2008.32.9.782
  12. Lee, Y. H., 2007. 'Mechanical Behaviors of Bulk Kagome Truss PCMs Woven of Metal Wires,' Master Thesis, Chonnam National University, Korea