참고문헌
- Hassana, M. and Hayderb, M., 2008, 'Modelling of Fluidelastic Vibrations of Heat Exchanger Tubes with Loose supports,' Nuclear Engineering and Design, Vol. 238, pp. 2507-2520 https://doi.org/10.1016/j.nucengdes.2008.05.014
- Kim, J.M., Huh, N.S., Chang, Y.S., Kim, Y.J., Hwang, S.S. and Kim, J.S., 2006, 'Structural Integrity Evaluation of SG Tube with Surface Wear-Type Defects,' Trans. of the KSME(A), Vol. 30, No. 12, pp. 1618-1625 https://doi.org/10.3795/KSME-A.2006.30.12.1618
- Park, Y.C., Jeong, S.H., Kim, J.S., Kim, Y.H. and Lee, Y.Z., 2006, 'Influence of Temperature on the Fretting Wear of Advanced Nuclear Fuel Cladding Tube against Supporting Grid,' J. of the KSTLE, Vol. 22, No. 3, pp. 144-148
- Kwak, D.H., Roh, H.R., Kim, J.K. and Cho, S.B., 2007, 'A Study on Fretting Fatigue Life Prediction for Cr-Mo Steel(SCM420),' J. of the Korean Society for Precision Engineering, Vol. 24, No. 4, pp. 123-130
- Ramesh, R. and Gnanamoorthy, R., 2007, 'Effect of Hardness on Fretting Wear Behaviour of Structural Steel, En 24, against Bearing Steel, En 31,' Materials & Design, Vol. 28, No. 5, pp. 1447-1452 https://doi.org/10.1016/j.matdes.2006.03.020
- Park, Y.W., Ramesh Bapu, G.N.K. and Lee, K.Y., 2007, 'Studies of Tin Coated Brass Contacts in Fretting Conditions under Different Normal Loads and Frequencies,' Surface & Coatings Technology, Vol. 201, No. 18, pp. 7939-7951 https://doi.org/10.1016/j.surfcoat.2007.03.039
- Xu, J., Zhou, Z.R., Zhang, C.H., Zhu, M.H. and Luo, J.B., 2007, 'An Investigation of Fretting Wear Behav-iors of Bonded Solid Lubricant Coatings,' J. of Materials Processing Technology, Vol. 182, pp. 146-151 https://doi.org/10.1016/j.jmatprotec.2006.07.023
- Miyoshi, K., Sanders, J.H., Hager Jr., C.H., Zabinski, J.S., Vander Wal, R.L., Andrews, R., Street Jr., K.W., Lerch, B.A. and Abel, P.B., 2008, 'Wear Behavior of Low-cost, Lightweight TiC/Ti-6Al-4V Composite under Fretting: Effectiveness of Solid-Film Lubricant Counterparts,' Tribology International, Vol. 41, pp. 24-33 https://doi.org/10.1016/j.triboint.2007.04.006
- Rybiak, R., Fouvry, S., Liskiewicz, T. and Wendler, B., 2008, 'Fretting Wear of a TiN PVD Coating under Variable Relative Humidity Conditions-Development of a 'Composite' Wear Law,' Surface & Coatings Tech-nology, Vol. 202, pp. 1753-1763 https://doi.org/10.1016/j.surfcoat.2007.07.103
- Iwabuchi, A., Lee, J.W. and Uchidate, M., 2007, 'Syner-gistic Effect of Fretting Wear and Sliding Wear of Co-Alloy and Ti-Alloy in Hanks' Solution,' Wear, Vol. 263, pp. 492-500 https://doi.org/10.1016/j.wear.2007.01.102
- Marui, E., Endo H., Hasegawa, N. and Mizuno, H., 1998, 'Prototype Fretting Wear Testing Machine and Some Experimental Results,' Wear, Vol. 214, pp.221-230 https://doi.org/10.1016/S0043-1648(97)00251-2
- Hager Jr., C.H., Sanders, J.H. and Sharma, S., 2004, 'Characterization of Mixed and Gross Slip Fretting Wear Regimes in Ti6Al4V Interfaces at Room Temperature,' Wear, Vol. 257, pp. 167-180 https://doi.org/10.1016/j.wear.2003.10.023
- Jeong, S.H., Park, C.Y. and Lee, Y.Z., 2005, 'Investigation of Wear Mechanisms of Tube Materials for Nuclear Steam Generators due to Stick-Slip Behavior under Fretting Conditions,' J. of the KSTLE, Vol. 21, pp. 33-38
- Kim, D.G. and Lee, Y.Z., 2001, 'Experimental Investigation on Sliding and Fretting Wear of Steam Generator Tube Materials,' Wear, Vol. 250, pp. 673-680, 2001 https://doi.org/10.1016/S0043-1648(01)00676-7
- Sauger, E., Fourvry, S., Ponsonnet, L., Kapsa, Ph., Martin, J.M. and Vincent, L., 2000, 'Tribologically Transformed Structure in Fretting,' Wear, Vol. 245, pp. 39-52 https://doi.org/10.1016/S0043-1648(00)00464-6