Journal of Sensor Science and Technology (센서학회지)

The Korean Sensors Society (한국센서학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristics of perovskite-structure Sr(Ti1-xFex)O3 thick film gas sensors

페롭스카이트 구조 Sr(Ti1-xFex)O3 후막 가스센서의 특성

  • Jin, Guang-Hu (Department of Advanced Materials Engineering, Chosun University) ;
  • Lee, Woon-Young (Education Center of Mold Technology for Advanced Materials & Parts all Rights Reserved, Chosun University) ;
  • Lee, Hyun-Gyu (Department of Advanced Materials Engineering, Chosun University) ;
  • Park, Jin-Seong (Department of Advanced Materials Engineering, Chosun University)
  • 김광호 (조선대학교 신소재공학과) ;
  • 이운영 (첨단부품소재 금형기술 인력양성사업단) ;
  • 이현규 (조선대학교 재료공학과) ;
  • 박진성 (조선대학교 신소재공학과)
  • Published : 2009.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

Perovskite-structure $Sr(Ti_{1-x}Fe_x)O_3$ thick films, in which x is 0.4 or 0.6, were prepared by normal ceramic process on alumina substrate. Electrical resistance was measured as a function of thermal treatment condition including atmosphere, time, and temperature. The resistance of $Sr(Ti_{1-x}Fe_x)O_3$ films is lower than those of $SrTiO_3$ or $SrFeO_3$ films. The temperature coefficient of resistance over $550^{\circ}C$ was measured to be 0 for the $Sr(Ti_{1-x}Fe_x)O_3$ films after thermal treatment at $1100^{\circ}C$ in air. The sensing property of the films was also measured as a function of temperature and gas such as $O_2$, CO, $CO_2$, NO and $NO_2$. $Sr(Ti_{1-x}Fe_x)O_3$ films showed a good sensing property for $O_2$, but no sensing signal for CO, $CO_2$, NO and $NO_2$.

Keywords

References

  1. A.D. Brailsford, M. Yussouff, and E.M. Logothetis, 'A first-principles model of the zirconia oxygen sensor', Sens. Actuators B, vol. 44, pp. 321-326, 1997 https://doi.org/10.1016/S0925-4005(97)00137-8
  2. Y.C. Yang and C.O. Park, 'Oxygen sensor for the Low temperature-measurement using yttria stabilized zirconia(YSZ) electrolyte and Ag electrode', J. Kor. Sensors Soc., vol. 15-2, pp. 97-102, 2006 https://doi.org/10.5369/JSST.2006.15.2.097
  3. M.Z. Atashbar, H.T. Sun, B. Gong, W. Wlodarski, and R. Lamb, 'XPS study of Nb-doped oxygen sensing $TiO_{2}$ thin films prepared by sol-gel method', Thin Solid Films, vol. 326, pp. 238-244, 1998 https://doi.org/10.1016/S0040-6090(98)00534-3
  4. E. Sotter, X. Vilanova, E. Llobet, A. Vasiliev, and X. Correig, 'Thick film titania sensors for detecting traces of oxygen', Sens. Actuators B, vol. 127, pp. 567-579, 2007 https://doi.org/10.1016/j.snb.2007.05.010
  5. G. Neri, G. Micali, A. Bonavita, R. Licheri, R. Orru, G. Cao, D. Marzorati, E. M. Borla, E. Roncari, and A. Sanson, '$FeSrTiO_{3}$-based resistive oxygen sensors for application in diesel engines', Sens. Actuators B, vol. 134, pp. 647-653, 2008 https://doi.org/10.1016/j.snb.2008.06.007
  6. P. Meuffels, 'Propan gas sensing with high-density $SrTi_{0.6}Fe_{0.4}O_{3-d}$ ceramics evaluated by thermogravimetric analysis', J. Eur. Ceram. Soc., vol. 27, pp. 285-290, 2007 https://doi.org/10.1016/j.jeurceramsoc.2006.05.078
  7. Toru Hara, Takashi Ishiguro, NaokiWakiya, and Kazuo Shinozaki, 'Oxygen sensitivity of perovskite-type dielectric thin films', Materials Science and Engineering B, vol. 161, pp. 142-145, 2009 https://doi.org/10.1016/j.mseb.2009.01.012
  8. A. Rothschild, S. J. Litzelman, H. L. Tuller, W. Menesklou, T. Schneider, and E. I. Tiffée, 'Temperature-independent resistive oxygen sensors based on$SrTi_{1-x}FexO_{3-d}$ solid solutions', Sens. Actuators B, vol. 108, pp. 223-230, 2005 https://doi.org/10.1016/j.snb.2004.09.044
  9. Y. Champion, F. Bernard, N. G. Millot, and P. Perriat, 'Sintering of copper nanopowders under hydrogen: an in situ X-ray diffraction analysis', Mater. Sci. Eng. A, vol. 360, pp. 258-263, 2003 https://doi.org/10.1016/S0921-5093(03)00446-5
  10. Y. Teraoka, H. Nii, S. Kagawa, K. Jansson, and M. Nygren, 'Influence of the simultaneous substitution of Cu and Ru in the perovskite-type (La,Sr)MO3 (M=Al, Mn, Fe, Co) on the catalytic activity for CO oxidation and CO–NO reactions', Mater. Sci. Eng. A, vol. 194-195, pp. 35-41, 2000
  11. J. W. Fergus, 'Perovskite oxides for semiconductorbased gas sensors', Sens. Actuators B, vol. 123, pp. 1169-1179, 2007 https://doi.org/10.1016/j.snb.2006.10.051