Korean Chemical Engineering Research

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지

Development of Solid Separator for Selective Solid Circulation in Two-interconnected Fluidized Beds System

2탑 유동층 시스템에서 선택적 고체순환을 위한 고체분리기 개발

  • Ryu, Ho-Jung (Greenhouse Gas Research Center, Korea Institute of Energy Research) ;
  • Park, Young Cheol (Greenhouse Gas Research Center, Korea Institute of Energy Research) ;
  • Lee, Seung-Yong (Greenhouse Gas Research Center, Korea Institute of Energy Research) ;
  • Kim, Hong-Ki (Department of Industrial Engineering Chemistry, Chungbuk National University)
  • 류호정 (한국에너지기술연구원 온실가스연구단) ;
  • 박영철 (한국에너지기술연구원 온실가스연구단) ;
  • 이승용 (한국에너지기술연구원 온실가스연구단) ;
  • 김홍기 (충북대학교 공업화학과)
  • Received : 2009.01.29
  • Accepted : 2009.03.02
  • Published : 2009.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

As a basic research of developing two-interconnected fluidized beds system for selective solid circulation, a solid separator was developed to separate fine and coarse particles by means of particle size difference with particle size separation system equipped with metal screen. The effects of gas velocity, height of solid separator, and separation area on the solid separation rate were investigated as well. The solid separation rate increased as the gas velocity, height of solid separator, and separation area increased. As the gas velocity and height of the solid separator increased, the variation of the solid separation rate was consistent with that of bubble size. Consequently, coarse($212{\sim}300{\mu}m$) and fine($63{\sim}106{\mu}m$) particles were separated using the solid separator and the solid separation rate was ranged from 4.4 to 127 g/min. We also proposed two interconnenced fluidized beds system for sorption enhanced water-gas shift process equipped with the developed solid separator.

선택적 고체순환이 가능한 2탑 유동층 공정 개발을 위한 기초연구로 금속 망이 장착된 입자크기분리 시스템에 의해 입자크기 차이를 이용하여 고운입자와 굵은입자를 분리할 수 있는 고체분리기를 개발하였으며 고체분리속도에 미치는 유속, 고체분리기의 설치높이 및 분리면적의 영향을 측정 및 고찰하였다. 고체분리기에 의한 고체분리속도는 기체유속, 고체분리기의 설치높이, 분리면적이 증가함에 따라 증가하였다. 기체유속 및 고체분리기 설치높이 증가에 따른 고체분리속도의 변화경향은 기포크기의 변화경향과 유사하였다. 본 연구에서 개발한 고체분리기를 이용하여 굵은입자($212{\sim}300{\mu}m$)와 고운입자($63{\sim}106{\mu}m$)의 분리가 가능하였으며 고체분리속도는 4.4~127 g/min의 범위를 나타내었다. 개발된 고체분리기를 회수증진 수성가스변환 공정에 적용하여 선택적 고체순환이 가능한 2탑 유동층 공정구성을 제안하였다.

Keywords

Acknowledgement

Supported by : 지식경제부

References

  1. Kunii, D. and Levenspiel, O., Fluidization engineering, 1st Ed., John Wiley & Sons, Inc., New York(1969)
  2. Yi, C. K. and Luyben, W. L., "Dynamic Model and Control Structure for a Hot Gas Desulfurization Fluidized Process," Ind. Eng. Chem. Res., 38, 4290-4298 (1999) https://doi.org/10.1021/ie990292g
  3. Yi, C. K., Jo, S. H., Seo, Y., Lee, J. B. and Ryu, C. K., "Continuous Operation of the Potassium-based Dry Sorbent CO2 Capture Process with Two Fluidized-Bed Reactors," Int. J. of Greenhouse Gas Control, 1, 31-36(2007) https://doi.org/10.1016/S1750-5836(07)00014-X
  4. Ryu, H. J. and Jin, G. T., 'Conceptual Design of 50 kW Thermal Chemical-Looping Combustor and Analysis of Variables,' Energy Engg. J., 12(4), 289-301(2003)
  5. Ryu, H. J. and Jin, G. T., "(Chemical-Looping Hydrogen Generation System: Performance Estimation and Process Selection," Korean J. Chem. Eng., 24(3), 527-531(2007) https://doi.org/10.1007/s11814-007-0093-8
  6. Ryu, H. J., 'Hydrogen Generation Characteristics of SMART System with Inherent CO2/H2 Separation,' Trans. of the Korean Hydrogen and New Energy Society, 18(4), 382-390(2007)
  7. Ryu, H. J., Yi, C. K., Shun, D. and Jin, G. T., 'Conceptual Design and Performance Estimation of SEWGS Process for Precombustion $CO_2$ Capture,' Theories and Applications of Chem. Eng., KIChE, 14(2), 294(2008)
  8. Ryu, H. J., Park, Y. C., Jo, S. H. and Park, M. H., "Development of Novel Two-Interconnected Fluidized Bed System," Korean J. Chem. Eng., 25(5), 1178-1183(2008) https://doi.org/10.1007/s11814-008-0194-z
  9. Ryu, H. J., Park, J., Kim, H. K. and Park, M. H., 'Solid Circulation Characteristics in a 3kW Chemical-looping Combustor,' Korean Chem. Eng. Res., 46(6), 1057-1062(2008)
  10. Kunii, D. and Levenspiel, O., Fluidization engineering, 2nd Ed., Butterworth-Heinemann, MA, 128(1991)