참고문헌
- Hwang, B. C., Kim, C. and Bae, W. B., "A Study of Structural Analysis and Torsional Characteristic of the Sleeve Spring Type-Torsional Vibration Damper," Journal of Korean Society for Precision Engineering, Vol. 26, No.2, pp. 94-100, 2009
- Yang, M. and Shima, S., "Simulation of Pyramid Type Three-roll Bending Process," International Journal of Mechanical Sciences, Vol. 30, No. 12, pp. 877-886, 1988 https://doi.org/10.1016/0020-7403(88)90071-9
- Yang, G., Mori, "Determination of Bending Using K. I. and Osakada, K., Forming Path in Three-Roll FEM Simulation and Fuzzy Reasoning," Journal of Material Processing Technology, Vol. 45, No. 1-4, pp. 161-166, 1994 https://doi.org/10.1016/0924-0136(94)90335-2
- Hu, W. and Wang, Z. R., "Theoretical Analysis and Experimental Study to Support the Development of a More Valuable Roll-bending Process," International Journal of Machine Tools and Manufacture, Vol. 41, No.5, pp. 731-747, 2001
- Zeng, J., Liu, Z. and Champliaud, H., "FEM Dynamic Simulation and Analysis of the RolIBending Process for Forming a Conical Tube," Journal of Material Processing Technology, Vol. 198, No. 1-3, pp. 330-343, 2008 https://doi.org/10.1016/j.jmatprotec.2007.07.016
- Hua, M., Sansome, D. H., Rao, K. P. and Baines, K., "Continuous Four-roll Plate Bending Process: Its Bending Mechanism and Influential Parameters," Journal of Material Processing Technology, Vol. 45, No. 1-4, pp. 181-186, 1994 https://doi.org/10.1016/0924-0136(94)90338-7
- Hua, M., Baines, K. and Cole, I. M., "Bending Mechanisms, Experimental Techniques and Preliminary Tests for the Continuous Four-Roll Plate Bending Process," Journal of Material Processing Technology, Vol. 48, No.1, pp. 159-172, 1995 https://doi.org/10.1016/0924-0136(94)01647-J
- Hua, M., Cole, I. M., Baines, K. and Rao, K. P., "A Formulation for Determining the Single-pass Mechanics of the Continuous Four-roll Thin Plate Bending Process," Journal of Material Processing Technology, Vol. 67, No.1, pp. 189-194, 1997 https://doi.org/10.1016/S0924-0136(96)02842-7
- Hua, M. and Lin, Y. H., "Large Deflection Analysis of Elastoplastic Plate in Steday Continuous Four-Roll Bending Process," International Journal of Mechanical Sciences, Vol. 41, No. 12, pp. 1461-1483, 1999 https://doi.org/10.1016/S0020-7403(98)00104-0
- Hua, M. and Lin, Y. H., "Effect of strain hardening on the Continuous Four-roll Plate Edge Bending Process," Journal of Material Processing Technology, Vol. 89-90, pp. 12-18, 1999 https://doi.org/10.1016/S0924-0136(99)00010-2
- Lin, Y. H. and Hua, M., "Influence of Strain Hardening on Continuous Plate Roll-bending Process," International Journal of Non-linear Mechanics, Vol. 35, No.5, pp. 883-896, 2000 https://doi.org/10.1016/S0020-7462(99)00065-7
- Hua, M., Baines, K. and Cole, I. M., "Continuous Four-Roll Plate Bending: a Production Process for the Manufacture of Single Seamed Tubes of Large and Medium Diameters," International Journal of Machine Tools and Manufacture, Vol. 39, No.6, pp. 905-935, 1999 https://doi.org/10.1016/S0890-6955(98)00075-3
- Lange, K., "Handbook of Metal Forming," McGrawHill, pp. 19.3-19.7, 1985
- Mielnik, E. M., "Metalworking Science Engineering," McGraw-Hili, pp. 731-734, 1991