References
- S. Nukiyama, “Maximum and Minimum Values of Heat Transmitted from Metal to Boiling Water Under Atmospheric Pressure,” Journal of the Japanese Society of Mechanical Engineers, 37, p.367 (1934)
- Kim, H. D. et al., “Investigation and Selection of Wall-to-Fluid Heat Transfer Correlations for the Development of Constitutive Relation,” SPACE’s Software Design Description, S06NX08-A-1-RD-03, Rev.00. (2008)
- McAdams, W. H., Heat Transmission, 3rd Edition, McGraw-Hill, New York (1954)
- Warner, C. Y. and Arpaci, V.S., “An experimental Investigation of Turbulent Natural Circulation in Air at Low Pressure along a Vertical Heated Flat Plate,” Int. J. Heat Mass Transfer, 11, p.397 (1968) https://doi.org/10.1016/0017-9310(68)90084-7
- Dittus, F. W. and Boelter, L.M.K., “Heat Transfer in Automobile Radiators of the Tubular Type,” Publications in Engineering, 2, Univ. of California, Berkeley, p.443 (1930)
- Gnielinski, V., “New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flow,” Int. Chem. Eng. 16, p.359 (1976)
- Sellars, J. R., Tribus, M. and Klein, J. S., “Heat Transfer to Laminar Flows in a Round Tube or Flat Conduit: The Graetz Problem Extended,” Transaction of the ASME, 78, p.441 (1956)
-
Lahey, R. T., “A Mechanistic Subcooled Model,”
$6^{th}$ Int. Heat Transfer Conf., Toronto, Canada, 1, p.293 (1978) - Saha, P. and Zuber, N, “Point of Net Vapor Generation and Vapor Void Fraction in Subcooled Boiling,” Proc. 5th Int. Heat Transfer Conf., Toyko, Japan, Paper B4.7 (1974)
- Ha, K.S., “Development of the Subcooled Boiling Model using a Computer Tool with the Drift-Flux Model,” Master thesis, KAIST (2004)
- Chen, J. C., “A Correlation for Boiling Heat Transfer to Saturated Fluid in Convective Flow,” ASMS paper, 63-HT-34, p.1 (1963)
- Groeneveld, D. C., Cheng, S.C., and Doan, T., “1986 AECLUO Critical Heat Flux Lookup Table,” Heat Transfer Engineering, 7, p.46 (1986) https://doi.org/10.1080/01457638608939644
- Biasi, L., Clerici, G.C., Garribba, S., Sala, R. and Tozzi,A., “Studies on Burnout, Part 3: A New Correlation for Round Ducts and Uniform Heating and Its Comparison with World Data,” Energia Nucleare, 14, p.530 (1967)
- Groeneveld, D. C. et al., “The 2006 CHF Lookup Table,” Nuclear Engineering and Design, 237, p.1909 (2007) https://doi.org/10.1016/j.nucengdes.2007.02.014
- Groeneveld, D. C. et al., “Lookup Tables for Predicting CHF and Film Boiling Heat Transfer: Past, Present, and Future,” Nuclear Technology, 152, p.87 (2005) https://doi.org/10.13182/NT152-87
- Chen, J.C. et al., “A Phenomenological Correlation for Post-CHF Heat Transfer, ” NUREG-0237 (1977)
- “RELAP5-3D Code Manual Volume IV: Models and Correlation,” INEEL-EXT-98-000834, Volume IV, Rev.2.4, (2005)
- Bjornard, T.A. and Griffith, P., “PWR Blowdown Heat Transfer,” Thermal and Hydraulic Aspects of Nuclear Reactor Safety, ASME, New York, 1, p.17 (1977)
- Thurgood, M. J. et al., “COBRA/TRAC-A Thermal-Hydraulics Code for Transient Analysis of Nuclear Reactor Vessels and Primary Coolant Systems,” NUREG/CR-3046 (1983)
- Jones, O.C. Jr. and Bankoff, S.G.., “Thermal and Hydraulic Aspects of Nuclear Reactor Safety,” ASME, New York, 1, (1977)
- Spore, J.W. et al., “TRAC-M/FORTRAN 90 (version 3.0) Theory Manual, ” LA-UR-00-910, (2000)
- Henry, R.E., “A Correlation for the Minimum Film Boiling Temperature,” AIChE Symposium Series, 138, p.81 (1974)
- US-NRC, “TRACE V5.0, Theory Manual, Field Equations, Solution Methods, and Physical Models,”
-
Groeneveld, D.C. and Stewart, J.C., “The Minimum Film Boiling Temperature for Water during Film Boiling Collapse,” Proc.
$7^{th}$ Int. Heat Transfer Conf. Munchen, 4, FB37, p393 (1982) - Elias, E. et al., “Development and Validation of a Transition Boiling Model for RELAP5/MOD3 Reflood Simulation,” Nuclear Engineering and Design, 183, p.269 (1998) https://doi.org/10.1016/S0029-5493(98)00185-X
- Carbajo, Juan J., “A Study on the Rewetting Temperature,” Nuclear Engineering and Design, 84, p.21 (1985) https://doi.org/10.1016/0029-5493(85)90310-3
- Groeneveld et al., “A Look-up Table for Fully Developed Film Boiling Heat Transfer,” Nuclear Engineering and Design, 225, p.83 (2003) https://doi.org/10.1016/S0029-5493(03)00149-3
- Bajorek, S. M. and Young, M. Y., “Direct-Contact Heat Transfer Model for Dispersed-Flow Film Boiling,” Nuclear Technology, 132, p.375 (2000) https://doi.org/10.13182/NT00-A3151
- Hammouda, N., Groeneveld, D.C., and Cheng, S.C., “Two-Fluid Modelling of Inverted Annular Film Boiling,” Int. J. Heat Mass Transfer, 40, p.2655 (1997) https://doi.org/10.1016/S0017-9310(96)00278-5
- Sun, K.H., Gonxalez-Santalo, J.M., and Tien, C.L., “Calculations of Combined Radiation and Convection Heat Transfer in Rod Bundles under Emergency Cooling Conditions,” J. of Heat Transfer, p.414 (1976)
- Nusselt, W. A., “The Surface Condensation of Water Vapor”, Zieschrift Ver. Deut. Ing., 60, p.541 (1916)
- Chato, J. C., “Laminar Condensation inside Horizontal and Inclined Tubes,” American society of heating, refrigeration and air conditioning engineering journal, 4, p.52 (1962)
- Shah, M. M., “A general correlation for heat transfer during film condensation inside pipes,” Int. J. Heat Mass Transfer, 22, p.547 (1979) https://doi.org/10.1016/0017-9310(79)90058-9
- Colburn, A. P. and Hougen, O. A., “Design of cooler condensers for mixtures of vapors with non-condensing gases,” Industrial and Engineering Chemistry, 26 (1934) https://doi.org/10.1021/ie50299a011
- No, H.C. and Park, H. S., “Non-iterative Condensation Modeling for Steam Condensation with Non-condensable Gas in a Vertical Tube,” Int. J. of Heat and Mass Transfer, 45, p.845 (2002) https://doi.org/10.1016/S0017-9310(01)00176-4
- Kim, H. D. et al., “Coding of Wall-to-Fluid Heat Transfer Correlations for the Development of Program Module,” SPACE’s Software Design Description, S06NX08-A-1-RD-11, Rev.00. (2008)
Cited by
- Integral Effect Tests on Transient Thermal-Hydraulic Behavior during a Steam Generator Tube Rupture Accident in the APR1400 vol.177, pp.3, 2012, https://doi.org/10.13182/NT12-A13482
- Simulation of protected and unprotected loss of flow transients in a WWER-1000 reactor based on the Drift-Flux Model vol.82, pp.1, 2017, https://doi.org/10.3139/124.110616