A Study on Optimization of Board Molding Process with GMPU Technology

GMPU 공법을 이용한 보드 성형 공정 최적화 연구

  • Choi, Dong-Jo (Institute of e-Vehicle Technology, Ulsan Univ.) ;
  • Park, Hong-Seok (Department of Mechanical and Automotive Engineering, Ulsan Univ.)
  • 최동조 (울산대학교 자동차선박기술대학원) ;
  • 박홍석 (울산대학교 기계공학자동자공학과)
  • Published : 2009.03.01

Abstract

Lightweight board has been used for manufacturing various fields of automotive interior trims for years. The GMPU board was constructed with glass fiber mat, honeycomb and polyurethane foamed using polyol and isocyanate materials which were sprayed by robot that is interlocked foaming machine. For more lightweight and cost reduction this paper shows how to optimize GMPU process parameters that related to foaming condition, robot position and robot velocity for polyurethane weight. The results show that flexural strength and modulus of board's specimens were evaluated by robot velocity and moving pattern. Based on that, a innovative process was developed for more lightweight and cost reduction.

Keywords

References

  1. Cho, K., "Automotive Materials of the 21st Century," Information Center for Materials, Vol. 1, pp. 87-90, 2000
  2. Han, G. J., Ahn, C. W., Ahn, S. C., Hong, D. K. and Han, D. S., "Modal Analysis of Sandwich Plate Structure Considering Buckling," J. of KSPE, Vol. 19, No. 6, pp. 104-108, 2002
  3. Seong, D. Y., Jung, C. G., Yoon, S. J., Yang, D. Y. and Ahn, D. G., "Formulation of Optimal Design Parameters and Failure Map for Metallic Sandwich Plates with Inner Dimpled Shell Structure Subject toBending Moment," J. of KSPE, Vol. 23, No. 8, pp. 127-136, 2006
  4. Seo, J., Hong, D. K. and Ahn C. W., "Optimum Design of the Laminated Composite Sandwich Plate Structure of Honeycomb Core considering Vibration Characteristics," Proceeding of KSPE Autumn Conference, pp. 710-715, 2001
  5. Choi, D. J. and Park, H. S., "Optimization of multicomponent injection molding process with skin layer," Proc. of KSAE Spring Conference, Vol. 3, pp. 1601-1606, 2007
  6. Lee, K. S. and Lee, K. S., "Development of the Lightweight Multi-layered board with High Stiffness for Automotive Interior Trims," Trans. of KSAE, Vol. 15, No. 3, pp. 41-46, 2007
  7. Krauss Maffei, "Applications for polyurethane spraymolding," Trans. of Krauss Maffei Spray Technology, pp. 4-11, 2007
  8. Hwang, Y. D., Cha, S. W., Yoon, J. D. and Kim, J. H., "A Change of Foaming Magnitude as Thickness of Mold System ," J. of KSPE, Vol. 17, No. 10, pp. 186- 191, 2000
  9. Park, H. S. and Pham, N. H., "New Approach to Optimized Conformal Cooling Channel for Plastic Injection Molding," Fall Conference Proceeding of KSAE, No. 4, pp. 1797-1802, 2007
  10. ABB, "RAPID Instruction, functions and data types by technical reference manual," Trans. of ABB ROBOT, pp. 955-957, pp. 1005-1008, 2007