한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제8권3호
  • /
  • Pages.68-73
  • /
  • 2009
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

교반기용 임펠러가 달린 축의 베어링 지지점에 따른 진동특성

Vibration Characteristics of Impeller Shaft for Mixing Machine According to the Positions of a Bearing Support

  • 홍도관 (한국전기연구원 전동력연구센터) ;
  • 안찬우 (동아대학교 기계공학부) ;
  • 백황순 (동아대학교 기계공학부 일반대학원) ;
  • 최석창 (창원전문대학 자동차기계학부 기계설계전공) ;
  • 박일수 (동명대학교 냉동공조공학과)
  • 투고 : 2009.06.18
  • 심사 : 2009.08.18
  • 발행 : 2009.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with the dynamic characteristics of the impeller shaft model which is the most important part in developing the resin mixing machine. The can is rotating by air motor in mixing machine. Then the end of shaft is fixed. The bearing support is to increase the fundamental natural frequency. The natural frequency analysis using finite element analysis software are performed on the imported commercial impeller shaft model. This paper presents calculated bearing stiffness of Soda, Harris and modified Harris formula considering contact angle according to bearing supported position. The most important fundamental natural frequency of the impeller shaft except bearing support is around 13.932 Hz. This paper presents one bearing and two bearings support position to maximize the 1st natural frequency. The maximized fundamental natural frequency is around 48.843 Hz in one bearing support and 55.52 Hz in two bearings support.

키워드

참고문헌

  1. Kim, C. N., 2006, "Operational Deflection Shape and Modal Analysis Testing To Solve Resonance Problems," Trans. of Korean Society of Marine Engineering, Vol. 30, No. 2, pp. 190-198.
  2. Park, J. H., Lee, J. H., Kim, B. H., Ahn, C. G. Kang, M. H. and Joo, Y. S., 2003, "A Development of Vibration Analysis Technique of A Mixer," proceeding of Korean Fluid Machinery Association, pp. 421-426
  3. Cho, J. H., Oh, J. E., Im, D. G., Yoon, H. U. and Kang, S. J., 1992, "Modeling and Vibration Analysis of Steering System," Trans. of Korean Society for Noise Vibration Engineering, Vol. 2, No. 2, pp. 125-134.
  4. Albert Kammerer, Reza S. Abhari, 2009, "Experimental Study on Impeller Balde Vibration During Resonance - Part I: Blade Vibration Due To Inlet Flow Distortion," Trans. of the ASME, Vol. 131, 022508-1-022508-11
  5. Albert Kammerer, Reza S. Abhari, 2009, "Experimental Study on Impeller Blade Vibraion During Resonance - Part II: Blade Damping," Trans. of the ASME, Vol. 131, 022509-1-022509-9
  6. Song, J. D., Kim, Y. C., Yang, B. S., and Lee, S. J., 2000, "Database for Rolling Element Bearing Stiffness," proceeding of Korean Fluid Machinery Association, pp. 387-391
  7. Tedric A. Harris, 1984, "Rolling Bearing Analysis ," Second Edi., John Wiley & Sons. pp.283