한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제19권2호
  • /
  • Pages.127-137
  • /
  • 2009
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

하이포이드 기어의 소음원인규명을 위한 디플렉션 테스트와 전달오차 측정에 대한 연구

Identify Hypoid Gear Whine Noise for Deflection Test and Transmission Error Measurement

  • 발행 : 2009.02.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Hypoid gears are widely used in rear drive and 4WD vehicle axles. Investigation of their sensitivity to deflections is one of the most important aspects of their design and optimization procedures. The deflection test is performed in the actual gear mounting using completely processed gear. This test should cover the full operating range of gear loads from no load to peak load. Under peak load the contact pattern should extend to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface. Transmission error is tested on an axle assembly triaxial real car load condition.

키워드

참고문헌

  1. Lee, Y. Y., Park, S. G. and Oh, J. E., 2007, “A Study on Vibration Transfer Path Identification of Vehicle Driver’s Position by Multi-dimensional Spectral Analysis,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No. 8, pp. 741-746 https://doi.org/10.5050/KSNVN.2007.17.8.741
  2. Park, S. G., Park, W. S., Sim, H. J., Lee, J. Y. and Oh, J. E., 2008, “Sound Quality Evaluation and Grade Construction of the Level D Noise for the Vehicle using MTS.”
  3. Sim, H. J., Ryu, J. S., Cha, K. J. and Oh, J. E., 2006, “The Optimal Design for Noise Reduction of the Intake System in Automobile Using Kriging Model,” Transactions of the KSME(A), Vol. 30, No. 4, pp. 465-472 https://doi.org/10.3795/KSME-A.2006.30.4.465
  4. Kato, Nomura, Trans, 2003, “Measuring Method of Transmission Error of Final Reduction Gearboxes and Gear Noise Occurrence Mechanism,” JSME, Vol. 69, No. 688, pp. 230-235
  5. Wells Coleman, 1975 “Analysis or Mounting Deflection on Bevel and Hypoid gears,” Gleason Works, SAE750152
  6. Mohsen Kolivand, Abdolhamid Hannaneh, Nasser Soltani, Zabihollah Kargar Shoroki, 2006, “Retaining Hypoid Gear Performance Characteristics with Differential Housing And Shafts Deflections,” ASME, IMECE2006-13216
  7. http://www.gleason.com