Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Development of End-milling Inspection System Using 450kVp Tube Voltage

450kVp Tube Voltage를 이용한 엔드밀링 검색 시스템 개발

  • Yoon, Moon-Chul (Department of Mechanical Engineering, PuKyong National University) ;
  • Jung, Jin-Seok (Korea Orthopedics and Rehabilitation Eng. Center) ;
  • Hwang, In-Ho (Korea Orthopedics and Rehabilitation Eng. Center) ;
  • Yuk, Sun-Woo (Korea Orthopedics and Rehabilitation Eng. Center) ;
  • Park, Su-Kang (Korea Electric Testing Institute) ;
  • Chin, Do-Hun (Kyunnam College of Information and Technology)
  • Received : 2009.02.05
  • Accepted : 2009.06.23
  • Published : 2009.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Transillumination system used by radiation is widely applied to industrial imaging system. In this study, the linear detector array constructed with scintillator and pin diode, and a multi-channel data acquisition system was developed for precision inspection of end-milling. The detector module consists of $16-CdWO_4$crystal scintillator and photodiode array. The detector and data acquisition system was applied to precision inspection of end-mill and the images of the end-mill were successfully reconstructed. The total system can analyze the Detector Quantum Efficiency(DQE) of each system. The performance of developed photodiodes equipment was compared with each other for different crystal geometry and its characteristics. Finally fine details of the end-mill phantom were constructed for industrial application. The image acquired contains several objects on a real time data transfer and the linear X-ray scanning system can be applied to many fields of a industry.

Keywords

References

  1. W. Rossner and B. C. Grabmaier, "Phosphors for X-ray detectors in computed tomography," J. Luminescience, Vol. 48/49, pp. 29–36, 1991. https://doi.org/10.1016/0022-2313(91)90072-4
  2. J. G. Graeme, "Photodiode Amplifier", McGraw Hill, 1996.
  3. S. W. Yuk, "A study on design of PIN photodiode coupled with pixellated scintillator for low energy detector", Ph. D Thesis of Korea Univ., 2006.
  4. Y. Saitoh, T. Akamine, K. Satoh, M. Inoue, J. Yamanaka, K. Aoki, S. Miyahara, and M. Kamiya, "New profiled silicon PIN photodiode for scitillation detector", IEEE Trans, Nucl, Sci., Vol. 42, pp. 345-350, Aug. 1995. https://doi.org/10.1109/23.467823
  5. T. Maisch, R. Gunzler, M. Weiser, S. Kalbitzer, W. Welser, and J. Kemmer, "Ion-implanted Si pn-junction detectors with ultra-thin windows," Nucl. Instrum, Methods, Vol. A288, pp. 19-23, 1990.
  6. T. E. Hansen, "Silicon detectors for the UV-and blue spectral regions with possible use as particle detectors", Nucl. Instrum, Methods, Vol. A235, pp.249-253, 1985.
  7. J. H. Siewerdsen, Signal, Noise and Detective Quantum Efficiency of a-Si:H Flat-Panel Imagers. Ann Arbor, MI: Univ, Michigan, pp. 74-88, 1998.
  8. "The X-Ray Pulse Generator RIG-450 Tech, Descrption," CoRAD, St. Petersburg, Russia, 2002.
  9. C. Greskovich and S. Duclos, Ceramic Scintillators. Cleveland, OH: GE Res. Development Ctr., 1996.
  10. Jerald G. Graeme, "Amplifier Applications of Op Amps", McGraw Hill, 1999.
  11. H. J Patrocino, J. P. Bissonnette, M. R. Bussiere and J. Schhreiner, Phys, Med, Biol, 41, pp. 239-253, 1996. https://doi.org/10.1088/0031-9155/41/2/003
  12. Wakerly, J. F., "Digital Design Principles and practices, Prentice-Hall, Englewood Cliffs, N. J, 1990.