한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제26권2호
  • /
  • Pages.26-34
  • /
  • 2009
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

MQL 밀링가공의 가공성 및 비용 평가에 관한 연구

A Study on Machinability and Cost Evaluation of MQL Milling Process

  • 이지형 (영남대학교 대학원 기계공학과) ;
  • 고태조 (영남대학교 기계공학부) ;
  • 백대균 (영남대학교 기계공학부)
  • Lee, Ji-Hyung (Department of Mechanical Engineering, Graduate School, Yeungnam Univ.) ;
  • Ko, Tae-Jo (Department of Mechanical Engineering, Yeungnam Univ.) ;
  • Baek, Dae-Gyun (Department of Mechanical Engineering, Graduate School, Yeungnam Univ.)
  • 발행 : 2009.02.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper is related to MQL (Minimum Quantity Lubrication) milling process, which is one of the environmentally friendly cuttings. The objective is to compare MQL milling process with conventional cutting fluid systems. To this end, machinability of MQL milling process was investigated, followed by the cost evaluation. Cutting force, surface roughness, tool wear, and cutting temperature were compared with each cutting fluid method. Consequently, total production costs wear evaluated with the mathematical models in terms of machining cost and cutting fluid loss.

키워드

참고문헌

  1. Kang, J. H., Lee, C. H., Song, J. Y. and Lee, J. K., "Environmentally conscious machining technology considered economic view," Proc. of KSPE Fall Conference, pp. 972-975, 2000
  2. Born, M. and Wolf, E., "Principles of Optics 7th Edition," Cambridge University Press, pp. 517-521, 1990
  3. NIOSH, 'Criteria for a recommended standard occupational exposure to metalworking fluids,' US. Dep. of Health and Human Services, CDC. NIOSH Publication, 1998
  4. Cselle, T., 'New direction in drilling,' Manufacturing Engineering, Vol. 115, No. 2, pp. 70-90, 1995
  5. Chang, Y. S., Kim, Y. S., 'Optimization of milling process considering the environmental impact of cutting fluids,' J. of the KSPE, Vol. 15, No. 12, pp. 14-20, 1998
  6. Dhar, N. R., Ahmed, M. T. and Islam, S., "An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel," International Journal of Machine Tools & Manufacture, Vol. 47, No. 5, pp. 748-753, 2007 https://doi.org/10.1016/j.ijmachtools.2006.09.017
  7. Bruni, C., Forcellese, A., Gabrielli, F. and Simoncini, M., 'Effect of the lubrication-cooling technique, insert technology and machine bed material on theworkpart surface finish and tool wear in finish turning of AISI 420B,' International Journal of Machine Tools & Manufacture, Vol. 46, No. 12-13, pp. 1547-1554, 2006 https://doi.org/10.1016/j.ijmachtools.2005.09.007
  8. Changwon University Machine Tool Research Center "Development of Cutting Technology Using Minimum Quantity Lubrication," pp. 62-70, 2005
  9. Chang, Y. S. and Kim, S. T., "Evaluation of the economics of high speed machining considering environmental effects," Clean Technology, Vol. 12,No. 3, pp. 182-189, 2006
  10. Chang, Y. S. and Kim, Y. S, "Optimization of milling process considering the environmental impact of cutting fluids," J. of the KSPE, Vol. 15, No. 12, pp. 14-20, 1998