참고문헌
- W. Szulc, M. Pietrzyk, H. Dyja, J. W. Pilarczyk, 1994, Theoretical and experimental analysis of drawing of steel rods covered with copper, J. Mater. Process. Technol., Vol. 45, pp. 401-406 https://doi.org/10.1016/0924-0136(94)90373-5
- S. Berski, H. Dyja, A. Maranda, J. Nowaczewski, G. Banaszek, 2006, Analysis of quality of bimetallic rod after extrusion process. J. Mater. Process. Technol., Vol. 177, pp. 582-586 https://doi.org/10.1016/j.jmatprotec.2006.04.107
- B. Avitzur, 1983, Handbook of metal-forming processes, John Wiley & Sons LTD, U.S.A.
- M. E. Epler, W. Z. Misiolek, 2006, Novel billet for co-extrusion of ferrous material tubes, Mater. Sci. & Eng. A, Vol. 429, pp. 43-49 https://doi.org/10.1016/j.msea.2006.04.100
- Y. M. Hwang, T. F. Hwang, 2002, An investigation in to the plastic deformation behavior within a conical die composite rod extrusion, J. Mater. Process. Technol., Vol. 121, pp. 226-233 https://doi.org/10.1016/S0924-0136(01)01254-7
- C. G. Kang, Y. J. Jung, H. C. Kwon, 2002, Finite element simulation of die design for hot extrusion process of A1/Cu clad composite and its experimental investigation, J. Mater. Process. Technol., Vol. 124, pp. 49-56 https://doi.org/10.1016/S0924-0136(02)00106-1
- K. Osakada, M. Limb, P. B. Mellor, 1973, Hydrostatic extrusion of composite rods with hard cores, Int. J. Mech. Sci., Vol. 15, No.4, pp. 291-307 https://doi.org/10.1016/0020-7403(73)90011-8
- J. M. Story, B. Avitzur, W. C. Hahn, 1976, The effect of receiver pressure on the observed flow pattern in hydrostatic extrusion of bimetal rods, J. Eng. Ind. Trans., ASME 98, Vol. 8, pp. 909-913
- A. K. Tayal, R. Natarajan, 1991, A finite element analysis of axisymmetric extrusion of composite rods, Int. J. Mach. Tool Des. Res., Vol. 21, pp. 227-235 https://doi.org/10.1016/0020-7357(81)90020-2
- J. M. Seo, J. H. Noh, K. H. Min, B. B. Hwang, K. C. Ham, D. H. Jang, 2007, Inhomogeneous deformation between construction materials in the Cu/A1 and Fe/AI co-extrusion processes, KSTP, Vol. 16. No.7, pp. 530-537 https://doi.org/10.5228/KSPP.2007.16.7.530
- SFTC, 2004, DEFROM-2D Ver. 8.0 Users Manual (Scientific Forming Technologies Corporation Inc., U.S.A.)
- H. Dyja, S. Mroz, A. Milenin, 2004, Theoretical and experimental analysis of the rolling process of bimetallic rods Cu-steel and Cu-A1, J. Mater. Process. Technol., Vol. 153-154, pp. 100-107 https://doi.org/10.1016/j.jmatprotec.2004.04.186
- CommScope BiMetals Co., 2004, Technical Catalog, CommScope, U.S.A.
- M. H. Apperley, C. C. Sorrell, A. Crosky, 2000, The co-extrusion of metal-sheathed high-temperature superconductors, J. Mater. Process. Technol., Vol. 102, pp. 193-202 https://doi.org/10.1016/S0924-0136(00)00432-5
- P. Kazanowski, M. E. Epler, W. Z. Misiolek, 2004, Bi-metal rod extrusion-process and product optimization, Mater. Sci. & Eng. A, Vol. 369, pp. 170-180 https://doi.org/10.1016/j.msea.2003.11.002
- R. Sliwa, 1997, Plastic zones in the extrusion of metal composites, J. Mater. Process. Technol., Vol. 67, pp. 29-35 https://doi.org/10.1016/S0924-0136(96)02813-0