Journal of Advanced Marine Engineering and Technology

  • 제33권1호
  • /
  • Pages.97-103
  • /
  • 2009
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지
DOI QR코드

DOI QR Code

다단-포머를 이용한 오토트랜스 미션용 솔레노이드 밸브 공정설계 및 유한요소해석

Finite Element Analysis and Process Planning about the Auto Transmission Solenoid Valve using of Multi-Former

  • 발행 : 2009.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The process design of forward Extrusion and Upsetting of Axi-symmetric part has been studied in this paper. During the cold forging product; auto transmission Solenoid Valve part, the defects such as folding and under-fill can be appeared by the improperly controlled metal flow. In this study, to reduce the folding and under-fill the design of experiments has been used to find out the significant design variables in the design of forging process. This paper deals with an Process Planning with which designer can determine operation sequences even after only a little experience in Process Planning of Multi-Former products by multi-stage former working. The approach is based on knowledge-based rules, and a process knowledge-base consisting of design rules is built. Based on the systematic procedure of process sequence design, the forming operation of cold forged auto transmission Solenoid Valve part is analyzed by the commercial Finite Element program, DEFORM/2D.

키워드

참고문헌

  1. P. Noack, "Computer-Aided Determination of Operation Sequence and Costs in Cold Forging of Rotation-Symmetric Workpieces", SME Technical Paper (MF 73-141), 1973
  2. B. Lengyel and T. V. Venkatasubramanian, Optimization in the Cold Forging of Steer. Proc. 18th MTDR Conf., pp. 153-157, 1977
  3. Victor Vazquez, Daniel Hannan and Taylan Altan. "Tool life in cold forging - an example of design improvement to increase service life". Journal of Materials Processing Technology 98, pp. 90-96, 2000 https://doi.org/10.1016/S0924-0136(99)00309-X
  4. P. Bariani. W. A. Knight. "Computer Aided Cold forging process design a Knowledge-Based system approach for forming sequence generation", CIRP, 37, pp. 243-246, 1977
  5. Chul Woo Park, Jung Hun Knag, Joon Ho Lee, Chul Kim, Moon Saeng Kim, Jae Chan Choi, "A study of automated process planning and die design for multi former-bolt products", KSPE Vol. 20, No.4, pp. 29-38, 2003
  6. Sevenler. K., Raghupati. P. S. and Altan. T., "Forging sequence design for multistage cold forging, J. of Mech. Work. Tech., Vol. 14, pp. 121-135, 1987 https://doi.org/10.1016/0378-3804(87)90055-6
  7. KURT LANGE "HANDBOOK OF METAL FORMING", McGraw-Hill Book Company, N.Y., 1967
  8. Howard H. Kuhn, "Optimum Die Design for Powder Compaction", The International Journal of Powder Technology, Vol.14, pp, 259-275, 1978
  9. Jong Ho Song, Young Taek Lm, "Development of the Process Design system for a Ball Stud", KSME Vol.23, No. 10, pp. 1646-1657, 1999
  10. G S. Min, J. Choi, J. C. Choi, B. M Kim, and H. Y. Cho, "Process Design in cold forging of the backward and forward extruded part", KSPE, Vol. 14, No.8, pp. 57-64, 1997
  11. Kwan-Woo Kim, Yi-Tae Kim, Wan­Jong Kim and Hae-Young Cho, "Finite Element Analysis for Multi-stage Forging Process Design of Bolt with N onaxisymmetric Washer Cam", Journal of the Korean Society of Marine Engineering, Vol. 32, No.4, pp. 585-595, 2008 https://doi.org/10.5916/jkosme.2008.32.4.585

피인용 문헌

  1. 블라인드 리벳의 단조공정설계를 위한 유한요소해석 vol.10, pp.10, 2009, https://doi.org/10.5762/kais.2009.10.10.2577