참고문헌
- Nachman, G., 1999, "Shot Peening-Past, Present, and Future," Proc. 7th Int. Conf. on Shot Peening, pp. 1-4
- Altenberger, I., 2005, "Deep Rolling - The Past, The Present and The Future," Proc. 9th Int. Conf. on Shot Peening, pp. 144-155
- www.metalimprovement.com
- Prevey, P. and Jayaraman, N., 2005, "Overview of Low Plasticity Burnishing for Mitigation of Fatigue Damage Mechanisms," Proc. 9th Int. Conf. on Shot Peening, pp. 267-272
- Watanabe, Y., Hasegawa, N. and Duchazeaubeneix J. M., 2003, "Effect of Ultrasonic Shot Peening on Fatigue Strength of High Strength Steel," Proc. 8th Int. Conf. on Shot Peening, pp. 306-310
- www.fujiwpc.co.jp
- Thomas M. Bartsch, 2002, "High Cycles Fatigue(HCF) Science and Technology Program 2001 Annual Report," AFRL-PR-WP-TR-2002-2060
- Etsion, I., 2005, "State of the Art in Laser Surface Texturing," Transactions of the ASME, Vol. 127 https://doi.org/10.1115/1.1828070
- Cho, I. H., Song, G. H., Kim, C. S., Nobuhide, A., Combs, A., Park, J. Y., Suh, C. M., Park, J. H. and Pyoun, Y. S., 2005, "Nano-structured Surface Modification of Tool Steel and It's Beneficial Effects in Mechanical Properties," Journal of Mechanical Science and Technology, Vol. 19, No. 11, pp. 2151-2156 https://doi.org/10.1007/BF02916512
- Suh, C. M., Song, G. H. Pyoun, Y. S., 2007, "Fatigue and Mechanical Characteristics of Nano-Structured Tool Steel by Ultrasonic Cold Forging Technology," J. Mat. Sci. Eng. A, Vol. 443, pp. 101-106 https://doi.org/10.1016/j.msea.2006.08.066
- Suh, C. M., Song, G. H., Park, J. H. Pyoun, Y. S., 2006, "A Study of the Mechanical Characteristics of Ultrasonic Cold Forged SKD 61," I. J. of Modern Physics B, Vo. 2(27), pp. 4541-4546 https://doi.org/10.1142/S0217979206041653
- Cho, I. H., Kim, C. S., Jin, S. G., Moon, J. G., Pyoun, Y. S., Jeong, D. H. and Lee, K. B., 2007, "Nano Surface Modification of Hub Bearing Race Ways for Increasing the Dynamic Load Rating and Decreasing the Friction Loss," Proceeding of 07APAC, No. 280
- Lee, C. S., Park, I. G., Cho, I. S., Seok, C. W., Hong, J. H., Pyoun, Y. S. and Park, J. H., 2007 “Ultrasonic Nano Crystal Surface Modification(UNSM) on Structure and Fatigue Characteristics of TI-6AL-4V Alloy” Proceedings of the Third Asian Pacific Conference on Biomechanics. No. 126
- Cherif, A., Pyoun, Y. S. and Scholtes, B., 2009, "Effects of Ultrasonic Nanocrystal Surface Modification (UNSM) on Residual Stress State and Fatigue Strength of AISI 304," Journal of Materials Engineering and Performance, JMEP-08-01-0709 (accepted and will be printed in 2009 summer)
- Suh, C. M., Kim, M. H., Baek, U. B., Pyoun, Y. S. and Kim, C. S., 2007, "A Study on Applying UNSM to Increasingthe Torsional Fatigue Strength of the Torsion Bar," Autumn proceeding of KSME, pp. 1-9
- Pyoun, Y., Cho, I., Kim, C., Park, J., Lee, C., Park, I., Cho, I. and Park, J., 2008, "Tribological and RCF (Rolling Contact Factigue) Effects OF UNSM (Ultrasonic Nanocrystal Surface Modification) Treatment on the Bearings" 2nd iCAT, 124
피인용 문헌
- Variation of Axial Tension-Compression Fatigue Characteristics by UNSM on Ti-6Al-4V vol.25, pp.6, 2011, https://doi.org/10.5574/KSOE.2011.25.6.042
- Variation of Rotating Bending Fatigue Characteristics by UNSM on Ti-6Al-4V vol.25, pp.6, 2011, https://doi.org/10.5574/KSOE.2011.25.6.049
- UNSM Surface Technology for Manufacturing and Remanufacturing Torsion Bars for Crawler Vehicles vol.25, pp.6, 2011, https://doi.org/10.5574/KSOE.2011.25.6.080