한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제26권1호
  • /
  • Pages.71-81
  • /
  • 2009
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

연속파형 Nd:YAG 레이저를 이용한 플라스틱성형용 금형강의 표면경화 특성

Characteristics of Surface Hardening of Dies Steel for Plastic Molding using Continuous Wave Md:YAG Laser

  • 신호준 (조선대학교 대학원 정밀기계공학과) ;
  • 유영태 (조선대학교 메카트로닉스공학과) ;
  • 오용석 (조선대학교 대학원 첨단부품소재공학과)
  • Shin, Ho-Jun (Department of Precision Engineering, Graduate School Chosun Univ.) ;
  • Yoo, Young-Tae (Department of Mechatronics Engineering, Chosun Univ.) ;
  • Oh, Yong-Seak (Department of Advanced Parts and Materials Engineering, Graduate School Chosun Univ.)
  • 발행 : 2009.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Die steel for plastic molding were used as mold material of automobile parts and electronic component industry. The material of this paper has superior to mechanical properties, such as repair weldability, corrosion resistance and high temperature strength, required mold parts for semitransparent. Laser-induced surface hardening technology is widely adopted to improver fatigue life and wear resistance via localized hardening at the surface of mold parts. The objective of this research work is to investigate on the characteristics of surface hardening of the laser process parameters, such as beam travel speed, laser power and defocsued spot position, for the case of die steel for plastic molding. Lens for surface hardening of large area is plano-convex type with elliptical profile to maintain uniform laser irradiation. According to the experimental results, large size of hardened layer at the surface of die steel for plastic molding was achieved, and microstructure of this layer was lath martensite. Optimal surface status and mechanical property of hardened layer could be obtained at 1095Watt, $0.25{\sim}0.3m/min$, 0mm (focal length: 232mm) for laser power, beam travel speed, and focal position. Where, heat input was $0.793{\times}10^{3}J/cm^2$, and width of hardened layer was 27.58mm.

키워드

참고문헌

  1. Dikova, T., Horiuchi, R., Yamaguchi, S. and Seto, S., "Influence of Overlapping Passes on Microstructure of Hot-Work Tool Steels Treated by Continuous CO2Laser," Proceeding of the 4th International Congress on Laser Advanced Materials Processing, 2006
  2. Miokovic, T., Schulze, V. and Vohringer, D. L., 'Prediction of phase transformations during laser surface hardening of AISI4140 including the effectsof inhomogeneous austenite formation,' Materials Science and Engineering A, Vol. 435-436, pp. 547- 555, 2006 https://doi.org/10.1016/j.msea.2006.07.037
  3. Basu, A., Samant, A. N., Harimkar, S. P., Majumdar, J. D., Manna, I. and Dahotre, N. N., "Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glasscomposition on AISI 4140 steel," Surface & Coating Technology, Vol. 202, pp. 2623-2631, 2007 https://doi.org/10.1016/j.surfcoat.2007.09.028
  4. Tian, Y. S., Chen, C. Z., Wang, D. Y. and Lei, T. Q., "Research Progress of Laser Surface Treatment on Titanium Alloys," Heat Treatment of Metals(China),Vol. 30, No. 8, pp. 29-34, 2005
  5. Wang, Q. B., Chao, M. J., Yang, K., Yuan, B. and Liang, E. J., "Laser Surface Hardening for 38CrMoAl steel," Heat Treatment of Metals(China), Vol. 30, No. 2, pp. 81-83, 2005
  6. Geetha, M., Kamachi, M. U. and Asokamani, R., "Microstructural and corrosion evaluation of laser surface nitrided Ti-13%Nb-13%Zr alloy," Surface Engineering, Vol. 20, No. 1, pp. 68-74, 2004 https://doi.org/10.1179/026708404225010595
  7. John, F. R., "LIA Handbook of Laser Materials processing," LIA. Magnolia Publishing Inc., pp. 223- 262, 2001
  8. John, F. R., "Industrial Applications of Lasers," Academic Press, pp. 316, 1997
  9. Yoo, Y. T., Shin, H. J. and Ahn, D. G., "Characteristics of laser surface hardening for SM45C medium carbon steel using continuous wave Nd:YAG laser," J. of the KSPE, Vol. 22, No. 11, pp. 51-58, 2005
  10. Na, D. G., Yoo, Y. T., Shin, H. J. and Shin, B. H., "Characteristics of Induction and laser surface hardening of SM45C steel," J. of the KSPE, Vol. 23, No. 7, pp. 39-50, 2006
  11. Kanaoka, M., "Laser Manufacturing Technology," Korea Industrial Information center, pp. 216, 2000
  12. John, F. R., "Industrial Applications of Lasers," Academic Press, pp. 331, 1997
  13. Kim, J. K., Kim, K. Y. and Park, H. W., "Metallographic Microscope," Gold Press, pp. 278- 280, 1999
  14. Luquinos, F., Conde, J. C., Bonss, S., Riveiro, A., Quinteroa, F., Comesañaa, R. and Pou, J., 'Theoretical and experimental analysis of high power diode laser(HPDL) hardening of AISI 1045 steel,' Applied surface science, Vol. 254, Issue 4, pp. 948- 954, 2007 https://doi.org/10.1016/j.apsusc.2007.07.200
  15. Dumitrescu, P., Koshy, P., Stenekes, J. and Elbestawi, M. A., "High-power diode laser assisted hard turning of AISI D2 tool steel," International Journal ofMachine Tools & Manufacture, Vol. 46, No. 15, pp. 2009-2016, 2006 https://doi.org/10.1016/j.ijmachtools.2006.01.005
  16. Kennedy, E., Byrne, G. and Collins, D. N., "A review of the use of high power diode lasers in surface hardening," Journal of Materials Processing Technology, Vol. 155-156, pp. 1855-1860, 2004 https://doi.org/10.1016/j.jmatprotec.2004.04.276
  17. Pashby, I. R., Barnes, S. and Bryden, B. G., "Surface hardening of steel using a high power diode laser," Journal of Materials Processing Technology, Vol. 139,pp. 585-588, 2003 https://doi.org/10.1016/S0924-0136(03)00509-0