Experimental Investigation of Size Dependent Electrical Parameters of Tuning Fork Crystal Oscillators

소리굽쇠 수정발진기의 크기에 따른 전기적인 특성변화에 대한 실험적 연구

  • 송상헌 (중앙대학교 전자전기공학부)
  • Published : 2009.12.01

Abstract

We performed frequency response measurements of four tuning fork crystal oscillators with different sizes and analyzed their measured electrical equivalent circuit parameters of R, L, $C_S$, and $C_P$ as functions of the linear dimensions, length, width, and thickness. We observed that R and L showed an decreasing behavior with increasing length while $C_S$, and $C_P$ showed an increasing behavior. Similar dependences of the electrical parameters on thickness were also observed. On the contrary, any noticeable dependence of these parameters on width has not been found.

Keywords

References

  1. J.-M. Friedt and E. Carry, 'Introduction to the quartz tuning fork,' Am. J. Phys. 75, 415 (2007) https://doi.org/10.1119/1.2711826
  2. F. J. Giessibl, 'High-speed force sensor for force microscopy and profilometry utilizing a quartz tuning fork,' Appl. Phys. Lett. 73, 3956 (1998) https://doi.org/10.1063/1.122948
  3. G. Zeltzer, J. C. Randel, A. K. Gupta, R. Bashir, S.-H. Song, and H. C. Manoharan, 'Scanning optical homodyne detection of high-frequency picoscale resonances in cantilever and tuning fork sensors' Appl. Phys. Lett. 91, 173124 (2007) https://doi.org/10.1063/1.2803774
  4. S.-H. Song, 'Electrical characterization of a tuning fork crystal oscillator using dual-phase lock-in technique,' Rev. Sci. Instrum. 80, 034703 (2009) https://doi.org/10.1063/1.3103574