Abstract
Vibration analysis of a turbo compressor test rig was carried out in order to investigate the vibrational characteristics of the compressor facility in KARI before conducting the compressor performance test of 5MW-class gas turbine engine for generation. The overall compressor test facility consists largely of inlet and exit ducts, a test section and a driving part. Vibration was measured with accelerometers at the test section and the driving part, especially at a main housing, a collector, a bearing carrier, a torquemeter, a gearbox, and an electric motor. Gap sensors are also installed to measure the rotordynamic characteristics of compressor shaft.
5MW급 발전용 가스터빈을 개발하기 위해 주요 구성품 중의 하나인 압축기의 성능을 시험 평가하고자 하며, 이를 위한 사전 작업으로 압축기 시험 리그의 진동 특성을 분석하여 압축기 운전시 구동 방법에 대한 정보를 확보하였다. 압축기 시험 설비는 입 출구 배관과 시험부 및 구동부로 구성되어 있고, 특히 구동부와 시험부에서 가속도계를 이용하여 진동 특성을 계측하였다. 압축기 주 하우징과 콜렉터, 베어링캐리어, 토크미터, 기어박스, 전동 모터 등에 가속도계를 장착하여 진동 속도 및 주파수 분석을 수행하였다.