DOI QR코드

DOI QR Code

진공 압출성형 및 래밍성형 공정에 의한 탄화규소 캔들 필터 제조 및 특성

Fabrication and Properties of the SiC Candle Filter by Vacuum Extrusion and Ramming Process

  • 신명관 (한국에너지기술연구원 반응분리소재연구센터) ;
  • 한인섭 (한국에너지기술연구원 반응분리소재연구센터) ;
  • 서두원 (한국에너지기술연구원 반응분리소재연구센터) ;
  • 김세영 (한국에너지기술연구원 반응분리소재연구센터) ;
  • 우상국 (한국에너지기술연구원 반응분리소재연구센터) ;
  • 이승원 (충남대학교 나노소재공학과) ;
  • 김영욱 (서울시립대학교 신소재공학과)
  • Shin, Myung-Kwan (Reaction and Separation Materials Research Center, Korea Institute of Energy Research (KIER)) ;
  • Han, In-Sub (Reaction and Separation Materials Research Center, Korea Institute of Energy Research (KIER)) ;
  • Seo, Doo-Won (Reaction and Separation Materials Research Center, Korea Institute of Energy Research (KIER)) ;
  • Kim, Se-Young (Reaction and Separation Materials Research Center, Korea Institute of Energy Research (KIER)) ;
  • Woo, Sang-Kuk (Reaction and Separation Materials Research Center, Korea Institute of Energy Research (KIER)) ;
  • Lee, Seoung-Won (Department of Nano Materials Engineering, Chungnam University) ;
  • Kim, Young-Wook (Department of Materials Science Engineering, the University of Seoul)
  • 발행 : 2009.11.30

초록

Porous SiC candle filter preforms were fabricated by extrusion and ramming process. To fabricate SiC candle filter preform, commercially available 85 ${\mu}m\;{\alpha}-$-SiC powder and 44 ${\mu}m$ mullite, CaC$O_3$ powder were used as the starting materials. The candle type preforms were fabricated by vacuum extrusion and ramming process, and sintered at $1400{^{\circ}C}$ 2 h in air atmosphere. The effect of forming method on porosity, density, strength (flexural and compressive strength) and microstructure was investigated. Also, corrosion test of the sintered candle filter specimens as forming method was performed at $600{^{\circ}C}$ in IGCC syngas atmosphere. The sintered SiC filter which was formed by ramming process has more higher density and exhibit higher strength than extruded filter. Its maximum density and 3-point bending strength were 2.00 g/$cm^3$ and 45 MPa, respectively.

키워드

참고문헌

  1. Y. Ohzawa, K. Nomura, and K. Sugiyama, “Relation between Porosity and Pore Size or Pressure Drop of Fibrous SiC Filter Prepared from Carbonized Cellulose-Powder Preforms,” Mater. Sci and Eng., A255 33-8 (1998) https://doi.org/10.1016/S0921-5093(98)00773-4
  2. J. Stringer and A. J. Leitch, “Ceramic Candle Filter Performance at the Gremethopre (UK) Pressurized Fluidized Bed Combustior,” J. Eng. Gas Turb. Power-T ASME, 114 371-79 (1992) https://doi.org/10.1115/1.2906601
  3. S. Hajek and W. Peukert, “Experimental Investigations with Ceramic High-temperature Filter Media,” Filtration & Separation,” 34 [1] 29-37 (1996)
  4. M. Chaudhuri , S. R. Verma, and A. Gupta, “Performance Evaluation of Ceramic Filter Candles,” J. Environ. Eng., 120 1646-51 (1994) https://doi.org/10.1061/(ASCE)0733-9372(1994)120:6(1646)
  5. R. R. Judkins, D. P. Stinton, and J. H. DeVan, “A Review of the Efficacy of Silicon Carbide Hot Gas Filters in Coal Gasification and Pressurized Fluidized Bed Combustion Environments,” Transactions of the ASME, 118 500-6 (1996) https://doi.org/10.1115/1.2816676
  6. M. A. Alvin, “Filter Component Assessment - Ceramic Candles,” pp. 8-24, Final Report, DOE/NETL Contract No. DE-AC21-94MC31147, 2004
  7. R. A. Newby, T. E. Lippert and M. A. Alvin, G. J. Burck, and Z. N. Sanjana, “Status of Westinghouse Hot Gas Filters for Coal and Biomass Power System,” J. Eng. Gas Turb. Power-T ASME, 121 401-08 (1999) https://doi.org/10.1115/1.2818487
  8. R. Westerheide, J. Adler, A. Walch, W. Volker, H. Buhl, and D. Fister, “High Temperature Gas Cleaning,” pp. 255-87, Vol. II, A. Dittler, G. Hemmer, and G. Kasper, (Ed.), Institut fur Mechanische Verfahrenstechnik und Mechanik der Universitat Karlsruhe, Germany, 1990
  9. P. Pastila, V. Helanti, A. P. Nikkila, and T. Mantyla, “Environmental Effects on Microstructure and Strength of SiCbased Hot Gas Filters,” J. Eur. Ceram. Soc., 21 [9] 1261-68 (2001) https://doi.org/10.1016/S0955-2219(00)00326-5