Journal of Korea Water Resources Association (한국수자원학회논문집)

Korea Water Resources Association (한국수자원학회)
권호 표지
DOI QR코드

DOI QR Code

Handling Method for Flux and Source Terms using Unsplit Scheme

Unsplit 기법을 적용한 흐름율과 생성항의 처리기법

  • Kim, Byung-Hyun (School of Archi. & Civil Engineering, Kyungpook National Univ.) ;
  • Han, Kun-Yeon (School of Archi. & Civil Engineering, Kyungpook National Univ.) ;
  • Kim, Ji-Sung (Post-Doc., River and Coastal Research Division, Korea Institute of Construction Technology)
  • 김병현 (경북대학교 공과대학 건축.토목공학부 BK21사업단) ;
  • 한건연 (경북대학교 공과대학 건축.토목공학부) ;
  • 김지성 (한국건설기술연구원 하천해안연구실)
  • Published : 2009.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The objective of this study is to develop the accurate, robust and high resolution two-dimensional numerical model that solves the computationally difficult hydraulic problems, including the wave front propagation over dry bed and abrupt change in bathymetry. The developed model in this study solves the conservative form of the two-dimensional shallow water equations using an unsplit finite volume scheme and HLLC approximate Riemann solvers to compute the interface fluxes. Bed-slope term is discretized by the divergence theorem in the framework of FVM for application of unsplit scheme. Accurate and stable SGM, in conjunction with the MUSCL which is second-order-accurate both in space and time, is adopted to balance with fluxes and source terms. The exact C-property is shown to be satisfied for balancing the fluxes and the source terms. Since the spurious oscillations in second-order schemes are inherent, an efficient slope limiting technique is used to supply TVD property. The accuracy, conservation property and application of developed model are verified by comparing numerical solution with analytical solution and experimental data through the simulations of one-dimensional dam break flow without bed slope, steady transcritical flow over a hump and two-dimensional dam break flow with a constriction.

본 연구에서는 마른하도 및 복잡한 지형에서의 파의 전파와 같은 수공학 분야에서 해결하기 어려운 문제를 해석하기 위한 고정확도 2차원 수치모형을 개발하기 위해, unsplit 유한체적기법과 HLLC Riemann 해법을 이용한 흐름율 계산으로 쌍곡선형 적분 보존형의 2차원 천수방정식을 해석하였다. Unsplit 기법의 적용을 위해 하상경사항은 발산정리를 이용하여 이산화한 형태를 적용하였으며, 흐름율과 생성항의 균형을 이루기 위해 수면경사법을 시간과 공간에 대해 2차정확도를 가지는 MUSCL 기법과 연계하였다. 그리고 적용한 생성항 처리기법과 흐름율과의 보존특성이 만족함을 보였다. 2차정확도의 사용으로 불연속 지점에서 발생할 수 있는 수치진동을 제거하기 위해서 경사제한자를 사용한 TVD 기법을 적용하였다. 개발모형을 정확해가 존재하는 생성항이 없는 1차원 댐 붕괴 흐름에 적용하여 흐름율 계산의 정확성을 검증하였고, 하상융기를 가진 하도의 정상류 및 천이류 모의를 통해 개발모형의 보존특성을 검증하였으며, 하상경사 및 단면의 확대/축소구간이 존재하는 2차원 댐 붕괴 흐름에 적용하여 개발모형의 적용성을 검증하였다.

Keywords

References

  1. 김대홍, 조용식 (2005). “불규칙 지형에 적용가능한 쌍곡선형 천수방정식을 위한 개선표면경사법.” 대한토목학회 논문집, 제25권, 제3B호, pp. 223-229
  2. 김우구, 정관수, 김재한 (2003). “WAF 기법을 이용한 천수방정식 해석.” 한국수자원학회 논문집, 제36권, 제5호, pp. 777-785 https://doi.org/10.3741/JKWRA.2003.36.5.777
  3. 김지성, 한건연 (2008). “Riemann 해법을 이용한 1차원 개수로 수리해석Ⅰ: 모형개발.” 한국수자원학회 논문집, 제41권, 제8호, pp. 761-772
  4. 윤태훈, 강석구, 이지송 (2002). “본류 수위 급상승에 의한 지류 역류 해석.” 대한토목학회 논문집, 제22권, 제 1-B호, pp. 33-41
  5. 이길성, 이성태 (1998). “충격파 모의를 위한 2차원 유한체적 비정상 흐름모형.” 한국수자원학회 논문집, 제31권 제3호, pp. 279-290
  6. Aureli, F., Mignosa, P., Tomirotti, M. (2000). “Numerical simulation and experimental verification of Dam-Break flows with shocks.” Journal of hydraulic research, IAHR, Vol. 38, No. 3, pp. 197- 206 https://doi.org/10.1080/00221680009498337
  7. Bae, Y.H., and Cho, Y.S. (2005). “Numerical Analysis of Discontinuous Flows with Finite Volume Method.” KSCE Journal of Civil Engineering, KSCE, Vol. 9, No. 5, pp. 439-445
  8. Bermudez, A., and Vazquez, M.E. (1994). “Upwind method for hyperbolic conservation laws with source terms.” Computers & Fluids, Vol. 23, No. 8, pp. 10491-1071
  9. Fraccarollo, L., and Toro, E.F. (1995). “Experimental and Numerical Assessment of the Shallow Water Model for Two-dimensional Dam-Break Type Problems.” Journal of Hydraulic Research, IAHR, Vol. 33, No. 6, pp. 843-864 https://doi.org/10.1080/00221689509498555
  10. Goutal, N. and Maurel, F. (1997). Proceedings of the 2nd workshop on dam‐break wave simulation, HE43/97/016/ Harten, A. (1983). “High resolution schemes for hyperbolic conservation laws.” Journal of Computational Physics, Vol. 49, No.3, pp. 357-393 https://doi.org/10.1016/0021-9991(83)90136-5
  11. Guo, W.D., Lai, J.S., and Lin, G.F. (2007) “Hybrid flux-splitting Finite-volume schemes for shallow- water flow simulations with source terms.” Journal of Mechanics, Vol. 23, No. 4, pp. 399-414 https://doi.org/10.1017/S1727719100001453
  12. Hu, K., Mingham, C.G., and Causon, D.M. (1998). “A Bore-Capturing Finite Volume Method for Open-Channel Flows.” International Journal for Numerical Method in Fluids, Vol. 28, No. 8, pp. 1241-1261 https://doi.org/10.1002/(SICI)1097-0363(19981130)28:8<1241::AID-FLD772>3.0.CO;2-2
  13. Kim, D.H., Cho, Y.S., and Kim, W.G. (2004). “Weighted Averaged Flux-Type Scheme for Shallow-Water Equations with Fractional Step Method.” Journal of Engineering Mechanics, ASCE, Vol. 130, No. 2, pp. 152-160 https://doi.org/10.1061/(ASCE)0733-9399(2004)130:2(152)
  14. Leveque, R.J. (1998). “Balancing Source Terms and Flux Gradients in High-Resolution Godunov Methods : The Quasi-Steady Wave-Propogation Algorithm.” Journal of Computational Physics, Vol. 146, No 1, pp. 346-365 https://doi.org/10.1006/jcph.1998.6058
  15. Leveque, R.J. (2002). Finite Volume Methods for Hyperbolic Problems, Cambridge University Press, Cambridge, UK
  16. Macchione, F., and Morelli, M.A. (2003). “Practical Aspects in Comparing Shock-Capturing Schemes for Dam Break Problems.” Journal of Hydraulic Engineering, ASCE, Vol. 129, No. 3, pp. 187-195 https://doi.org/10.1061/(ASCE)0733-9429(2003)129:3(187)
  17. Toro, E.F. (1999). Riemann Solvers and Numerical Methods for Fluid Dynamics, 2nd Ed., Springer- Verlag, Berlin, Germany
  18. Toro, E.F. (2001). Shock Capturing Methods for Free Surface Shallow Flows, John Wiley & Sons, Chichester, UK
  19. Valiani, A., and Begnudelli, L. (2002). “Divergence form for bed slope source term in shallow water equations.” Journal of Hydraulic Engineering, ASCE, Vol. 132, No. 7, pp. 652-665
  20. Vazquez-Cendon, M.E. (1999). ”Improved Treatment of Source Terms in Upwind Schemes for the Shallow Water Equations in Channels with Irregular Geometry.” Journal of Computational Physics, Vol. 148, No. 2, pp. 497-526 https://doi.org/10.1006/jcph.1998.6127
  21. Zhou, J.G., Causon, D.M., Mingham, C.G., and Ingram, D.M. (2001). “The Surface Gradient Method for the Treatment of Source Terms in the Shallow-Water Equations.” Journal of Computational Physics, Vol. 168, No. 1, pp. 1-25 https://doi.org/10.1006/jcph.2000.6670
  22. Zhou, J.G., Causon, D.M., Mingham, C.G., and Ingram, D.M. (2004). “Numerical Prediction of Dam-Break Flows in General Geometries with Complex Bed Topography.” Journal of Hydraulic Engineering, ASCE, Vol. 130, No. 4, pp. 332-340 https://doi.org/10.1061/(ASCE)0733-9429(2004)130:4(332)
  23. Zia, A., and Banihashemi, M.A. (2008) “Simple efficient algorithm (SEA) for shallow flows with shock wave on dry and irregular beds.” International Journal for Numerical Methods in Fluids, Vol. 56, No. 11, pp. 2021-2043 https://doi.org/10.1002/fld.1585

Cited by

  1. Performance Improvement of Computing Time of 2 Dimensional Finite Volume Model using MPI vol.47, pp.7, 2014, https://doi.org/10.3741/JKWRA.2014.47.7.599
  2. An Application of the Multi-slope MUSCL to the Shallow Water Equations vol.44, pp.10, 2011, https://doi.org/10.3741/JKWRA.2011.44.10.819