DOI QR코드

DOI QR Code

Numerical Study on the Effects of GDL Porosity on the PEMFC Performance

기체확산층의 기공률이 고분자 전해질 연료전지 성능에 미치는 영향에 관한 전산해석 연구

  • 김경연 (한밭대학교 기계공학과) ;
  • 손영준 (서울대학교 기계공학과, 한국에너지기술연구원) ;
  • 김민진 (한국에너지기술연구원) ;
  • 이원용 (한국에너지기술연구원)
  • Published : 2009.12.01

Abstract

Numerical analysis was carried out to investigate the effect of GDL (Gas diffusion layer) porosity on the performance of PEMFC (proton exchange membrane fuel cell). A complete three-dimensional model was chosen for single straight channel geometry including cooling channel. Main emphasis is placed on the heat and mass transfer through the GDL with different porosity. The present numerical results show that at high current densities, the cell voltage is influenced by the GDL porosity while the cell performance is nearly the same at low current densities. At high current densities, low value of GDL porosity results in decrease of the fuel cell performance since the diffusion of reactant gas through GDL becomes slow with decreasing porosity. On the other hand, for high GDL porosity, the effective thermal conductivity becomes low and the heat generated in the cell is not removed rapidly. This causes the temperature of fuel cell to increase and gives rise to dehydration of the membrane, and ultimately increase of the ohmic loss.

Keywords

References

  1. O'Hayre, R., Cha, S.-W., Colella, W., and Prinz, F.B., Fuel Cell Fundamentals 2005: Wiley
  2. Cho, C.-W., Ahn, E.-J., Lee, S., Yoon, Y.-G., and Lee, W.-Y., 2009, ' A Study on the Bypass Flow Penetrating Through a Gas Diffusion Layer in a PEM Fuel Cell with Serpentine Flow Channels,' Trans. of the KSME (B), Vol. 33, No. 4, pp. 288-297 https://doi.org/10.3795/KSME-B.2009.33.4.288
  3. Shimpalee, S., Dutta, S., Lee, W.K., and Van Zee, J.W., 1999, ' Effect of Humidity on PEM Fuel Cell Performance Part II - Numerical Simulation,' in ASME IMECE. Nashville, TN
  4. Berning, T. and Djilali, N., 2003, ' Three-Dimensional Computational Analysis of Transport Phenomena in a PEM Fuel Cell - a Parametric Study,' Journal of Power Sources, Vol. 124, No. 2, pp. 440-452 https://doi.org/10.1016/S0378-7753(03)00816-4
  5. Roshandel, R., Farhanieh, B., and Saievar-Iranizad, E., 2005, ' The Effects of Porosity Distribution Variation on PEM Fuel Cell Performance,' Renewable Energy, Vol. 30, No. 10, pp. 1557-1572 https://doi.org/10.1016/j.renene.2004.11.017
  6. Jang, J.H., Yan, W.M., and Shih, C.C., 2006, ' Effects of the Gas Diffusion-Layer Parameters on Cell Performance of PEM Fuel Cells,' Journal of Power Sources, Vol. 161, No. 1, pp. 323-332 https://doi.org/10.1016/j.jpowsour.2006.03.089
  7. Ju, H., Meng, H., and Wang, C.Y., 2005, ' A Single-Phase, Non-Isothermal Model for PEM Fuel Cells,' Int. J. Heat Mass Transfer, Vol. 48, No. 7, pp. 1303-1315 https://doi.org/10.1016/j.ijheatmasstransfer.2004.10.004
  8. Wang, C.Y., 2004, ' Fundamental Models for Fuel Cell Engineering,' Chemical Reviews, Vol. 104, No. 10, pp. 4727-4765 https://doi.org/10.1021/cr020718s
  9. Nield, D.A. and Bejan, A., Convection in Porous Media. 1999: Springer
  10. Shimpalee, S. and Dutta, S., 2000, ' Numerical Prediction of Temperature Distribution in PEM Fuel Cells,' Numerical Heat Transfer Part a-Applications, Vol. 38, No. 2, pp. 111-128 https://doi.org/10.1080/10407780050135360
  11. Nield, D.A., 1991, ' Estimation of the Stagnant Thermal Conductivity of Saturated Porous Media,' Int. J. Heat Mass Transfer, Vol. 34, No. 6, pp. 1575-1576 https://doi.org/10.1016/0017-9310(91)90300-4
  12. Marthur, S., Tondon, P.K., and Saxena, S.C., 1967, ' Thermal Conductivity of Binary, Ternary and Quaternary Mixtures of Real Gases,' Molecular Physics, Vol. 12, No. pp. 569-579 https://doi.org/10.1080/00268976700100731

Cited by

  1. The Effect of Liquid Water in Fuel Cell Cathode Gas Diffusion Layer on Fuel Cell Performance vol.39, pp.4, 2015, https://doi.org/10.5916/jkosme.2015.39.4.374