참고문헌
- 한국건설기술연구원, 초고성능 시멘트 복합체를 이용한 교량 거더 개발, 한국건설기술연구원, 2005, pp. 14-22
- 강수태, 박정준, 고경택, 김성욱, “UHPC를 사용한 철근 콘크리트 보의 휨강도 평가,” 한국구조물진단학회지, 12권, 5호, 2008, pp. 81-90
- Li, V. C. and Fischer, G., “Reinforced ECC-An Evolution from Materials to Structures,” Proceedings of the 1st fib Congress-Concrete Structures in the 21st Century, Osaka, 2002, pp. 105-122
- DAfStB, State-of-the-art Report on Ultra High Performance Concrete-Concrete Technology and Design, draft 3, Deutscher Ausschuss fur Stahltbeton/German Association for Reinforced Concrete, Berlin, Germany, 2003, pp. 22-45
- Yuguang, Y., Walraven, J., and Uiji, J. D., “Study on Bending Behavior of an UHPC Overlay on a Steel Orthotropic Deck,” Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 639-646
- Si-Larbi, A., Ferrier, E., and Hamelin, P., “Flexural Behavior of Ultra High Performance Concrete Reinforced with Short Fibers and CFRP Rebars,” Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, 2008, pp. 661-672
- Chunxiang, Q. and Patnaikuni, I., “Properties of High-Strength Steel Fiber-Reinforced Concrete Beams in Bending,” Cement & Concrete Composites, Vol. 21, No. 21, 1999, pp. 73-81 https://doi.org/10.1016/S0958-9465(98)00040-7
- Manfred, T. and Jens, G., “Bending Design of Steel-Strengthened UHPC,” Proceedings of 2nd International Symposium on Ultra High Performance Concrete, Kassel, 2008, pp. 523-532
- Casanova, P. and Rossi, P., “Analysis of Metallic Fibre-Reinforced Concrete Beams Submitted to Bending,” Materials and Structures, Vol. 29, No. 190, 1999, pp. 354-361 https://doi.org/10.1007/BF02486343
- Naaman, A. E. and Reinhardt, H. W., “Proposed Classification of HPFRC Composites Based on Their Tensile Response,” Materials and Structures, Vol. 39, No. 5, 2006, pp. 547-555 https://doi.org/10.1617/s11527-006-9103-2
- Kooiman, A. G., “Modelling the Post-cracking Behavior of Steel Fibre Reinforced Concrete for Structural Design Purposes,” HERON, Vol. 45, No. 4, 2000, pp. 275-307
- Material Property Characterization of Ultra-High Performance Concrete, US Department Transportation, Federal Highway Administration, 2006, pp. 23-93
- 이주하, 양준모, 이승훈, 윤영수, “강섬유보강 초고강도 콘크리트의 확대타설을 통한 기둥하중전달 성능향상,” 콘크리트학회 논문집, 19권, 2호, 2007, pp. 209-216
- 강수태, 김윤용, 이방연, 김진근, “섬유의 방향성이 강섬유 보강 초고강도 콘크리트의 휨거동 특성에 미치는 영향,” 콘크리트학회 논문집, 20권, 6호, 2008, pp. 731-739 https://doi.org/10.4334/JKCI.2008.20.6.731
- 김우석, 곽윤근, 김주범, “강섬유 보강 콘크리트 보의 휨내력 예측식의 제안,” 콘크리트학회 논문집, 18권, 3호, 2006, pp. 361-370
- 오영훈, 김정해, “전단보강이 없는 강섬유보강 콘크리트 휨부재의 휨 및 전단강도의 평가,” 콘크리트학회 논문집, 20권, 2호, 2008, pp. 257-267 https://doi.org/10.4334/JKCI.2008.20.2.257
- American Concrete Institute, “Design Considerations for Steel Fiber Reinforced Concrete,” ACI 544.4R-88, ACI Manual of Concrete Practice, Detroit, 1988, pp. 544.4R-1-544.4R-18
- Fedaral Highway Administration, Material Property Characterization of Ultra-High Performance Concrete, Fedaral Highway Administration, 2006, pp. 23-49
- Shin, S. W., Ghosh, S. K., and Moreno, J., “Flexural Ductility of Ultra High Strength Concrete Members,” ACI Structural Journal, Vol. 86, No. 4, 1989, pp. 394-400
피인용 문헌
- An Experimental Study on the Mechanical Behavior of Concrete Using Non-Sintered Cement vol.12, pp.1, 2012, https://doi.org/10.5345/JKIBC.2012.12.1.115
- Effect of hybrid fibre reinforcement on capacity of reinforced concrete beams vol.166, pp.10, 2013, https://doi.org/10.1680/stbu.12.00013
- Comparsions for Flexural Performance of Amorphous Steel Fiber Reinforced Concrete vol.24, pp.3, 2015, https://doi.org/10.7844/kirr.2015.24.3.66
- Flexural Strength of Hybrid Steel Fiber-Reinforced Ultra-High Strength Concrete Beams vol.27, pp.3, 2015, https://doi.org/10.4334/JKCI.2015.27.3.283
- Evaluation of Flexural Behavior of Reinforced Concrete Beams Using Alkali Activated Slag Concrete vol.27, pp.3, 2015, https://doi.org/10.4334/JKCI.2015.27.3.311
- An Experimental Study on Flexural Behavior of Steel Fiber Reinforced Ultra High Performance Concrete Prestressed Girders vol.22, pp.6, 2010, https://doi.org/10.4334/JKCI.2010.22.6.777
- Tension Stiffening of Reinforced High Performance Fiber Reinforced Cementitious Composites (HPFRCC) vol.22, pp.6, 2010, https://doi.org/10.4334/JKCI.2010.22.6.859
- Structural Behavior of Hybrid Steel Fiber-Reinforced Ultra High Performance Concrete Beams Subjected to Bending vol.26, pp.6, 2014, https://doi.org/10.4334/JKCI.2014.26.6.771
- Experiment of Flexural Behavior of Reinforced Concrete Beams with High Volume Fly Ash vol.26, pp.3, 2014, https://doi.org/10.4334/JKCI.2014.26.3.323
- Fiber Orientation Factor on a Circular Cross-Section in Concrete Members vol.26, pp.3, 2014, https://doi.org/10.4334/JKCI.2014.26.3.307
- Experiment of Shear Behavior of Reinforced Concrete Beams with High Volume Fly Ash vol.26, pp.4, 2014, https://doi.org/10.4334/JKCI.2014.26.4.525
- Strength Characteristics of Ultra-High Performance Fiber Reinforced Concrete (UHPFRC) in accordance with Physical Properties of Fiber vol.9, pp.1, 2018, https://doi.org/10.11004/kosacs.2018.9.1.044