References
- Y. Jeong, J. Sahu, D. Payne, and J. Nilsson, 'Ytterbiumdoped large-core fiber laser with 1.36 kW continuouswave output power,' Opt. Exp. 12, 6088-6092 (2004) https://doi.org/10.1364/OPEX.12.006088
- G. Bonati, H. Voelckel, U. Krause, A. Tunnermann, J. Limpert, A. Liem, T. Schreiber, S. Nolte, and H. Zellmer, '1.53 kW from a single Yb-doped photonic crystal fiber laser,' Late Breaking Developments Session 5709-2a, Photonics West 2005
- Information available from http://www.ipgphotonics.com
- I.-B. Sohn, Y.-C. Noh, Y.-S. Kim, D.-K. Ko, and J. Lee, 'Laser ablation of polypropylene films using nanosecond, picosecond, and femtosecond laser,' J. Opt. Soc. Korea 12, 38-41 (2008) https://doi.org/10.3807/JOSK.2008.12.1.038
- Y. Izawa, N. Miyanaga, J. Kawanaka, and K. Yamakawa, 'High power lasers and their new applications,' J. Opt. Soc. Korea 12, 178-185 (2008) https://doi.org/10.3807/JOSK.2008.12.3.178
- S. Yoo, C. Basu, A. J. Boyland, C. L. Sones, J. Nilsson, J. K. Sahu, and D. N. Payne, 'Photodarkening in Yb-doped aluminosilicate fibers induced by 488 nm irradiation,' Opt. Lett. 32, 1626-1628 (2007) https://doi.org/10.1364/OL.32.001626
- M. Engholm and L. Norin, 'Preventing photodarkening in ytterbium-doped high power fiber lasers; correlation to the UV-transparency of the core glass,' Opt. Exp. 16, 1260-1268 (2008) https://doi.org/10.1364/OE.16.001260
- J. Koponen, M. Soderlund, H. J. Hoffman, D. A. V. Kliner, J. P. Koplow, and M. Hotoleanu, 'Photodarkening rate in Yb-doped silica fibers,' Appl. Opt. 47, 1247-1256 (2008) https://doi.org/10.1364/AO.47.001247
- Y. Jeong, J. Nilsson, J. K. Sahu, D. N. Payne, R. Horley, L. M. B. Hickey, and P. W. Turner, 'Power scaling of single-frequency ytterbium-doped fiber master oscillator power amplifier sources up to 500 W,' IEEE J. Select. Topics Quantum Electron. 13, 546-551 (2007) https://doi.org/10.1109/JSTQE.2007.896639
- P. Dupriez, A. Piper, A. Malinowski, J. K. Sahu, M. Ibsen, B. C. Thomsen, Y. Jeong, L. M. B. Hickey, M. N. Zervas, J. Nilsson, and D. J. Richardson, 'High average power high repetition rate picosecond pulsed fiber master oscillator power amplifier source seeded by a gain-switched laser diode at 1060 nm,' IEEE Photon. Technol. Lett. 18, 1013-1014 (2006) https://doi.org/10.1109/LPT.2006.873486
- Y. Jeong, J. K. Sahu, R. B. Williams, D. J. Richardson, K. Furusawa, and J. Nilsson, 'Ytterbium-doped largecore fibre laser with 272 W output power,' Electron. Lett. 39, 977-978 (2003) https://doi.org/10.1049/el:20030655
- P. Laperle, C. Pare, H. Zheng, A. Croteau, and Y. Taillon, 'Yb-doped LMA triple-clad fiber laser,' in Proc. Photonics North 2006 (Quebec, Canada, Jun. 2006), paper FB-07-3-3 https://doi.org/10.1117/12.707712
- J. M. Fini, 'Bend-resistant design of conventional and microstructure fibers with very large mode area,' Opt. Exp. 14, 69-81 (2006) https://doi.org/10.1364/OPEX.14.000069
- J. K. Sahu, Y. Jeong, D. J. Richardson, and J. Nilsson, 'A 103W erbium/ytterbium co-doped large-core fiber laser,' Opt. Comm. 227, 159-163 (2003) https://doi.org/10.1016/j.optcom.2003.09.022
- Y. Jeong, J. Nilsson, J. K. Sahu, D. B. S. Soh, P. Dupriez, C. A. Codemard, S. Baek, D. N. Payne, R. Horley, J. A. Alvarez-Chavez, and P. W. Turner, 'Singlemode plane-polarized ytterbium-doped large-core fiber laser with 633 W continuous-wave output power,' Opt. Lett. 30, 955-957 (2005) https://doi.org/10.1364/OL.30.000955
- Y. Jeong, S. Yoo, C. A. Codemard, J. Nilsson, J. K. Sahu, D. N. Payne, R. Horley, P. W. Turner, L. Hickey, A. Harker, M. Lovelady, and A. Piper, 'Erbium:ytterbium codoped large-core fiber laser with 297-W continuouswave output power,' IEEE J. Select. Topics Quantum Electron. 13, 573-579 (2007) https://doi.org/10.1109/JSTQE.2007.897178
- Information available from http://www.newport.com
- D. C. Brown and H. J. Hoffman, 'Thermal, stress, and thermo-optic effects in high average power double-clad silica fiber lasers,' IEEE J. Quantum Electron. 37, 207-217 (2001) https://doi.org/10.1109/3.903070
- Y. Wang, C.-Q. Xu, and H. Po, 'Thermal effects in kilowatt fiber lasers,' IEEE Photon. Technol. Lett. 16, 63-65 (2004) https://doi.org/10.1109/LPT.2003.818913
- G. P. Agrawal, Nonlinear Fiber Optics, 3rd ed. (Academic Press, New York, USA, 2001)
- A. A. Said, T. Xia, A. Dogariu, D. J. Hagan, M. J. Soileau, E. W. Van Stryland, and M. Mohebi, 'Measurement of the optical damage threshold in fused quartz,' Appl. Opt. 34, 3374-3376 (1995) https://doi.org/10.1364/AO.34.003374
-
A. Smith, B. Do, and M. Soderlund, 'Deterministic nanosecond laser-induced breakdown thresholds in pure and
$Yb^{3+$} doped fused silica,' Proc. SPIE 6453, 645317-645328 (2007) https://doi.org/10.1117/12.701399 - W. Koechner, Solid-state Laser Engineering, 5th ed. (Springer, Berlin, Germany, 1999)
- Y. Jeong, S. Baek, P. Dupriez, J.-N. Maran, J. K. Sahu, J. Nilsson, and B. Lee, 'Thermal characteristics of an end-pumped high-power ytterbium-sensitized erbium-doped fiber laser under natural convection,' Opt. Exp. 16, 19865-19871 (2008) https://doi.org/10.1364/OE.16.019865
- Y. Jeong, P. Dupriez, J. K. Sahu, J. Nilsson, D. Shen, W. A. Clarkson, and S. D. Jackson, 'Power-scaling of a 975-nm diode-pumped ytterbium sensitized thuliumdoped silica fibre laser operating in the 2 μm wavelength range,' Electron. Lett. 41, 173-174 (2005) https://doi.org/10.1049/el:20057534
Cited by
- Highly efficient Yb-doped silica fibers prepared by powder sinter technology vol.36, pp.9, 2011, https://doi.org/10.1364/OL.36.001557
- 1-kilowatt CW all-fiber laser oscillator pumped with wavelength-beam-combined diode stacks vol.20, pp.3, 2012, https://doi.org/10.1364/OE.20.003296
- A simple error control strategy using MATLAB BVP solvers for Yb3+-doped fiber lasers vol.126, pp.22, 2015, https://doi.org/10.1016/j.ijleo.2015.07.122
- Stimulated Brillouin scattering in Yb3+-doped dual-clad fiber lasers based on the temperature-dependent model vol.126, pp.1, 2015, https://doi.org/10.1016/j.ijleo.2014.08.103
- Novel shooting method with simple control strategy for fiber lasers vol.125, pp.8, 2014, https://doi.org/10.1016/j.ijleo.2013.09.077
- Experimental Investigation on Evolution of the Beam Quality in a 2-kW High Power Fiber Amplifier vol.26, pp.1, 2014, https://doi.org/10.1109/LPT.2013.2287195
- Theoretical study of power amplification in tapered fiber with multi-seed parallel injection vol.22, pp.11, 2013, https://doi.org/10.1088/1674-1056/22/11/114208
- Regenerative Er-doped Fiber Amplifier System for High-repetition-rate Optical Pulses vol.17, pp.5, 2013, https://doi.org/10.3807/JOSK.2013.17.5.357
- High power fiber lasers: current status and future perspectives [Invited] vol.27, pp.11, 2010, https://doi.org/10.1364/JOSAB.27.000B63
- 2.5 kW monolithic continuous wave (CW) near diffraction-limited fiber laser at 1080 nm vol.11, pp.10, 2014, https://doi.org/10.1088/1612-2011/11/10/105102
- Excellent initial guess functions for simple shooting method in Yb3+-doped fiber lasers vol.20, pp.4, 2014, https://doi.org/10.1016/j.yofte.2014.04.003
- Generating high-quality beam in a multimode LD-pumped all-fiber Raman laser vol.25, pp.11, 2017, https://doi.org/10.1364/OE.25.012581
- Novel configuration for an enhanced and compact all-fiber Faraday rotator with matched birefringence vol.25, pp.16, 2017, https://doi.org/10.1364/OE.25.018643
- High-power Q-switched rod-type photonic-crystal-fiber laser with linear polarization vol.60, pp.11, 2012, https://doi.org/10.3938/jkps.60.1872
- Scalable waveguide design for three-level operation in Neodymium doped fiber laser vol.24, pp.25, 2016, https://doi.org/10.1364/OE.24.028633
- Experimental study on tandem pumped fiber amplifier vol.44, pp.5, 2012, https://doi.org/10.1016/j.optlastec.2011.11.047
- 2kW CW near single mode all-fiber Ytterbium-doped fiber laser vol.126, pp.18, 2015, https://doi.org/10.1016/j.ijleo.2015.05.009
- Number sequence transition method based on MATLAB BVP solvers for high power Yb3+-doped fiber lasers vol.58, 2014, https://doi.org/10.1016/j.optlastec.2013.09.020
- 15 kW ytterbium-doped single-transverse-mode, linearly polarized monolithic fiber master oscillator power amplifier vol.54, pp.10, 2015, https://doi.org/10.1364/AO.54.002880
- Review on recent progress on Yb-doped fiber laser in a variety of oscillation spectral ranges vol.22, pp.5, 2012, https://doi.org/10.1134/S1054660X12050404
- 315 kW direct diode-pumped near diffraction-limited all-fiber-integrated fiber laser vol.54, pp.14, 2015, https://doi.org/10.1364/AO.54.004556
- Power scaling analysis of tandem-pumped Yb-doped fiber lasers and amplifiers vol.19, pp.19, 2011, https://doi.org/10.1364/OE.19.018645
- Thin-disk laser-pumping of ytterbium-doped fiber laser vol.8, pp.12, 2011, https://doi.org/10.1002/lapl.201110083
- High Power Fiber Lasers: A Review vol.20, pp.5, 2014, https://doi.org/10.1109/JSTQE.2014.2321279
- Compact all-fiber optical Faraday components using 65-wt%-terbium–doped fiber with a record Verdet constant of −32 rad/(Tm) vol.18, pp.12, 2010, https://doi.org/10.1364/OE.18.012191
- Single mode 43 kW output power from a diode-pumped Yb-doped fiber amplifier vol.25, pp.13, 2017, https://doi.org/10.1364/OE.25.014892
- Shooting method with excellent initial guess functions for multipoint pumping Yb3+-doped fiber lasers vol.336, 2015, https://doi.org/10.1016/j.optcom.2014.09.074
- Rigorous Analysis on Ring-Doped-Core Fibers for Generating Cylindrical Vector Beams vol.18, pp.6, 2014, https://doi.org/10.3807/JOSK.2014.18.6.650
- Numerical Modeling and Optimization of Mid-Infrared Fluoride Glass Raman Fiber Lasers Pumped by $\hbox{Tm}^{3+}$-Doped Fiber Laser vol.5, pp.2, 2013, https://doi.org/10.1109/JPHOT.2012.2233726
- Influence of the fiber Bragg gratings with different reflective bandwidths in high power all-fiber laser oscillator vol.383, 2017, https://doi.org/10.1016/j.optcom.2016.09.020
- An approximate analytical model for temperature and power distribution in high-power Yb-doped double-clad fiber lasers vol.24, pp.11, 2014, https://doi.org/10.1088/1054-660X/24/11/115107
- High power tandem pumping fibre amplifier vol.20, pp.11, 2011, https://doi.org/10.1088/1674-1056/20/11/114208
- Adaptive shooting method for 4-point side-pumping high power Yb3+-doped double-clad fiber lasers vol.22, 2015, https://doi.org/10.1016/j.yofte.2014.12.001
- The Improved Power of the Central Lobe in the Beam Combination and High Power Output vol.29, pp.4, 2012, https://doi.org/10.1088/0256-307X/29/4/044204
- Ytterbium-doped double-cladding fiber with 35 kW output power, fabricated by chelate gas phase deposition technique vol.6, pp.4, 2016, https://doi.org/10.1364/OME.6.000979
- An optimized configuration of large mode field area PMMA photonic crystal fiber with low bending loss: a new approach vol.27, pp.2, 2016, https://doi.org/10.1007/s10854-015-3972-5
- 65 GHz linearly polarized kilowatt fiber amplifier based on active polarization control vol.56, pp.10, 2017, https://doi.org/10.1364/AO.56.002760
- Tuning and doubling of the generation frequency of fiber lasers vol.49, pp.4, 2013, https://doi.org/10.3103/S875669901304002X
- Experimental investigation of thermal effects and PCT on FBGs-based linearly polarized fiber laser performance vol.23, pp.8, 2015, https://doi.org/10.1364/OE.23.010506
- Emission from Mo-O charge-transfer state and Yb3+ emission in Eu3+ -doped and nondoped molybdates under UV excitation vol.100, pp.4, 2017, https://doi.org/10.1111/jace.14679
- Cladding-pumped erbium-doped multicore fiber amplifier vol.20, pp.18, 2012, https://doi.org/10.1364/OE.20.020191
- Dynamically stable Nd:YAG resonators with beam quality beyond the birefringence limit and pumping of a singly resonant optical parametric oscillator vol.43, pp.4, 2018, https://doi.org/10.1364/OL.43.000695
- Design and analysis of high-power segmented-core trench-assisted Yb-free erbium doped fiber amplifier vol.95, 2017, https://doi.org/10.1016/j.optlastec.2017.04.013
- Impact of photodarkening on the mode instability threshold vol.23, pp.12, 2015, https://doi.org/10.1364/OE.23.015265
- Comparison between threshold and sensitivity of stimulated Brillouin scattering at different pumping configurations in high-power double-clad fiber lasers vol.126, pp.24, 2015, https://doi.org/10.1016/j.ijleo.2015.09.150
- Leakage channel fibers with microstuctured cladding elements: A unique LMA platform vol.22, pp.7, 2014, https://doi.org/10.1364/OE.22.008574
- Novel bending-resistant design of two-layer low-index trench fiber with parabolic-profile core vol.22, pp.15, 2014, https://doi.org/10.1364/OE.22.018036
- Compact non-cascaded all-fiber Raman laser operating at 1174 nm vol.69, pp.1, 2016, https://doi.org/10.3938/jkps.69.31
- High power all-fiber amplifier with different seed power injection vol.24, pp.13, 2016, https://doi.org/10.1364/OE.24.014463
- Scalable Coherent Combining of Kilowatt Fiber Amplifiers Into a 2.4-kW Beam vol.20, pp.5, 2014, https://doi.org/10.1109/JSTQE.2013.2296771
- A Modified Bend-Resistant Multitrench Fiber With Two Gaps vol.33, pp.23, 2015, https://doi.org/10.1109/JLT.2015.2491651
- Femtosecond fiber CPA system based on picosecond master oscillator and power amplifier with CCC fiber vol.21, pp.5, 2013, https://doi.org/10.1364/OE.21.005338
- High power ytterbium-doped fiber lasers — fundamentals and applications vol.28, pp.12, 2014, https://doi.org/10.1142/S0217979214420090
- Decreasing effective reflectivity of the output coupler in the power scaling of fiber lasers vol.13, pp.3, 2016, https://doi.org/10.1088/1612-2011/13/3/035107
- Effect of Heat Treatment on Liquation Cracking in Continuous Fiber and Pulsed Nd:YAG Laser Welding of HASTELLOY X Alloy vol.48, pp.11, 2017, https://doi.org/10.1007/s11661-017-4300-x
- Current Status and Prospects of High-Power Fiber Laser Technology (Invited Paper) vol.27, pp.1, 2016, https://doi.org/10.3807/KJOP.2016.27.1.001
- Optimization of Yb3+-doped double-clad fiber lasers using a new approximate analytical solution vol.43, pp.1, 2011, https://doi.org/10.1016/j.optlastec.2010.05.004
- 1.1-kW Ytterbium Monolithic Fiber Laser With Assembled End-Pump Scheme to Couple High Brightness Single Emitters vol.23, pp.11, 2011, https://doi.org/10.1109/LPT.2011.2123879
- Efficient spectral control and tuning of a high-power narrow-linewidth Yb-doped fiber laser using a transversely chirped volume Bragg grating vol.21, pp.4, 2013, https://doi.org/10.1364/OE.21.004027
- Mitigating transverse mode instability in a single-end pumped all-fiber laser oscillator with a scaling power of up to 2 kW vol.18, pp.10, 2016, https://doi.org/10.1088/2040-8978/18/10/105803
- Investigation on Power Scalability of Diffraction-Limited Yb-Doped Fiber Lasers vol.20, pp.5, 2014, https://doi.org/10.1109/JSTQE.2014.2309056
- Simple and reliable light launch from a conventional single-mode fiber into a helical-core fiber through an adiabatically tapered splice vol.20, pp.23, 2012, https://doi.org/10.1364/OE.20.025562
- Experiment research on optical properties of all microstructure optical fiber laser vol.91, 2017, https://doi.org/10.1016/j.optlastec.2016.11.027
- High-power output of ytterbium-doped oxyorthosilicate lasers at 1018 nm vol.10, pp.1, 2013, https://doi.org/10.1088/1612-2011/10/1/015103
- Theoretical and experimental research on the ∼980-nm Yb-doped fiber laser vol.55, pp.7, 2016, https://doi.org/10.1117/1.OE.55.7.076113
- A 1150-W 1018-nm Fiber Laser Bidirectional Pumped by Wavelength-Stabilized Laser Diodes vol.24, pp.3, 2018, https://doi.org/10.1109/JSTQE.2018.2805801
- Radiation-balanced Yb:YAG disk laser vol.27, pp.2, 2019, https://doi.org/10.1364/OE.27.001392