대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제33권1호
  • /
  • Pages.1-26
  • /
  • 2009
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

원통쉘 연구의 현황과 전망

Review on the Cylindrical Shell Research

  • 이영신 (충남대학교 기계설계공학과)
  • 발행 : 2009.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Cylindrical shells of isotropic and composite laminated materials are being used many engineering applications. This paper reviews the literature focusing on various aspects of shell research. The aspects of research receiving interest here are the cylindrical theory being used, the stress, buckling analysis and the impact analysis. The vibration analyses and stiffening characteristics of the cylindrical shell are investigated. The design optimizations of the cylindrical shell are reviewed. The studies on the conical and spherical shell are also reviewed. This review aticles contain 236 referencees.

키워드

참고문헌

  1. Kim, C.W., 1973, "Development of Shell Theory and Recent Research Trends," Journal of KSME, Vol. 13, No. 2, pp. 89-91
  2. Timoshenko, S. P. and Woinosky-Krieger, S., 1959, "Theory of Plates and Shells," Second Edition, McGraw Hill, ISBN : 0-07-085820-9
  3. Flugge, W., 1973, "Stresses in Shells," Second Edition, Springer Verlag, ISBN : 0-387-05322-0
  4. Steele, C. R., 1960, "Toroidal Shells with Nonsymmetric Loading," Ph.D. Thesis, Stanford University, USA
  5. Noor, A. K., 1990, "Bibliography of Monographs and Surveys on Shells," Applied Mechanics Review, Vol. 43, No. 9, pp. 223-234 https://doi.org/10.1115/1.3119170
  6. Pietraszkiewicz, W., 1992, "Addendum to: Bibliography of Monographs and Surveys on Shells," Applied Mechanics Review, Vol. 45, No. 6, pp. 249-250 https://doi.org/10.1115/1.3121399
  7. Noor, A. K. and Burton, W. S., 1992, "Computational Models for High-Temperature Multilayered Composite Plates and Shells," Applied Mechanics Review, Vol. 45, No. 10, pp. 419-446 https://doi.org/10.1115/1.3119742
  8. Noor, A. K., 1992, "Mechanics of Anisotropic Plates and Shells-a New Look at an Old Subject," Coputers and Structures, Vol. 44, No. 3, pp. 499-514 https://doi.org/10.1016/0045-7949(92)90383-B
  9. Singer, J., 1999, "On the Importance of Shell Buckling Experiments," Applied Mechanics Review, Vol. 52, No. 6, pp. 17-25 https://doi.org/10.1115/1.3098922
  10. Qatu, M. S., 2002, "Recent Research Advances in the Dynamic Behavior of Shells: 1989-2000, Part 1: Laminated Composite Shells," Applied Mechanics Review, Vol. 55, No. 4, pp. 325-350 https://doi.org/10.1115/1.1483079
  11. Qatu, M. S., 2002, "Recent Research Advances in the Dynamic Behavior of Shells: 1989-2000, Part 2: Homogeneous Shells," Applied Mechanics Review, Vol. 55, No. 5, pp. 415-434 https://doi.org/10.1115/1.1483078
  12. Amabili, M. and Paidoussis, M. P., 2003, "Review of Studies on Geometrically nonlinear Vibrations and Dynamics of Circular Cylindrical Shells and Panels, with and without Fluid-Structure Interaction," Applied Mechanics Review, Vol. 56, No. 4, pp. 349-381 https://doi.org/10.1115/1.1565084
  13. Krivoshapko, S. N., 2002, "Static, Vibration, and Buckling Analyses and Applications to One-sheet Hyperboloidal Shells of Revolution," Applied Mechanics Review, Vol. 55, No. 3, pp. 241-270 https://doi.org/10.1115/1.1470479
  14. Ambartsumian, S. A., "Nontraditional Theories of Shells and Plates," Applied Mechanics Review, Vol. 55, No. 5, pp. R35-R44, 2002 https://doi.org/10.1115/1.1495002
  15. Grigolyuk, E. and Tolkachev, V., 1987, "Contact Problems in the Theory of Plates and Shells," Imported Pubn, ISBN : 0828534322
  16. Rubin, M. B., 2000, "Cosserat Theories: Shells, Rods and Points," Springer, ISBN: 978-0-7923-6489-4
  17. Jawad, M. H., 2004, "Design of Plate and Shell Structures," ASME Press, ISBN : 1860583326
  18. Krauthammer, T. and Ventsel, E., 2001, "Thin Plates & Shells: Theory, Analysis, & Applications," CRC, ISBN : 0824705750
  19. Ivanova, J. and Pastrone, F., 2001,"Geometric Methods for Stability of Non-Linear Elastic Thin Shells," Springer, ISBN: 978-0-7923-7524-1
  20. Durban, D., Givoli, D. and Simmonds, J. G. (Eds.), 2002, "Advances in the Mechanics of Plates and Shells ; The Avinoam Libai Anniversary Volume," Springer, ISBN 978-1-4020-0380-6
  21. Wempner, G. and Talaslidi, D., 2002, "Mechanics of Solids and Shells:Theories and Approximations," CRC, ISBN: 0849396549
  22. Ciarlet, P. G., 2002, "Mathematical Elasticity : Theory of Shells (Studies in Mathematics and its Applications)," North Holland, ISBN : 0444828915
  23. Drew, H. R. and Pellegrino, S.(Eds), 2002, "New Approaches to Structural Mechanics, Shells and Biological Structures," Springer, ISBN: 978-1-4020-0862-7
  24. Hinton, E., Sienz, J. and Ozakca, M., 2003, "Analysis and Optimization of Prismatic and Axisymmetric Shell Structures: Theory, Practice and Software," Springer, ISBN: 1852334215
  25. Ye, J., 2003, "Laminated Composite Plates and Shells: 3D Modelling," Springer, ISBN:1852334541
  26. Reddy, J. N., 2003, "Mechanics of Laminated Composite Plates and Shells:Theory and Analysis, Second Edition," CRC,ISBN : 0849315921
  27. Chapelle, D. and Bathe, K. J., 2003, "The Finite Element Analysis of Shells - Fundamentals," Springer, ISBN: 978-3-540-41339-4
  28. Awrejcewicz, J. and Krysko, V. A., 2003, "Nonclassical Thermoelastic Problems in Nonlinear Dynamics of Shells ; Applications of the Bubnov-Galerkin and Finite Difference Numerical Methods," Springer, ISBN: 978-3-540-43880-9
  29. Qatu, M. S. 2004, "Vibration of Laminated Shells and Plates," Academic Press, ISBN : 0080442714
  30. Kienzler, R., Altenbach, H. and Ott, I.(Eds.), 2004, "Theories of Plates and Shells; Critical Review and New Applications," Series: Lecture Notes in Applied and Computational Mechanics, Vol. 16, Springer, ISBN: 978-3-540-20997
  31. Li, H., Lam, K. Y. and Ng, R. T., 2005, "Rotating Shell Dynamics," Elsevier, ISBN : 0080444776
  32. Libai, A. and Simmonds, J. G., 2005, "The Nonlinear Theory of Elastic Shells," Cambridge University Press, ISBN: 0521019761
  33. Ciarlet, P. G., 2005, "An Introduction to Differential Geometry with Applications to Elasticity," Springer, ISBN: 978-1-4020-4247
  34. Chang, C. H., 2005, "Mechanics of Elastic Structures with Inclined Members ; Analysis of Vibration, Buckling and Bending of X-Braced Frames and Conical Shells," Springer, ISBN 978-3-540-24384-7
  35. Grady, D., 2006, "Fragmentation of Rings and Shells ; The Legacy of N.F. Mott," Springer, ISBN: 978-3-540-27144-4
  36. Awrejcewicz, J., Krysko, V. A. and Krysko, A. V., 2007, "Thermo-Dynamics of Plates and Shells," Springer, ISBN: 978-3-540-34261-8
  37. Lee, C. Y., 2008, "Geometrically Correct Laminated Composite Shell Modeling," VDM Verlag Dr. Mueller e.K., ISBN: 3836437619
  38. Voyiadjis, G. Z. and Woelke, P. L., 2008, "Elasto-Plastic and Damage Analysis of Plates and Shells," Springer, ISBN: 978-3-540-79350-2
  39. Onate, E., 2009, "Structural Analysis with the Finite Element Method. Linear Statics;Volume 2: Beams, Plates and Shells," Springer, ISBN: 978-1-4020-8742-4
  40. Hamidzadeh, H. R., 2009, "Vibrations of Thick Cylindrical Structures," Springer, ISBN: 978-0-387-75590-8
  41. Kim, C. W. and Lee, Y. S., 1978, "Study on the Exact Theory of Cylindrical Shells," Trans. of KSME, Vol. 2. No. 2, pp. 31-37
  42. Kim, C. W. and Lee, Y. S. 1979, "Study on the Approximate Theory of Cylindrical Shells," Trans. of KSME, Vol. 3, No. 4, pp. 158-163
  43. Lee, Y. S., 1980, "A Study on the Buckling Analysis of Cylindrical Shell under Uniform Lateral Pressure," Trans. of Korean Institute of Industrial Educators, Vol. 5, No. 2, pp. 144-148
  44. Kim, C. W. and Lee, Y. S., 1981, "Analysis of a Cantilever Cylindrical Shell by an Approximate Theory," Trans. of KSME, Vol. 5, No. 3, pp. 183-192
  45. Lee, Y. S., Park, J. H. and Ong, J. W., 1984, "Analysis of Orthotropic Cylindrical Shells Subjected to Localized Loads," Trans. of KSME, Vol. 8, No. 5, pp. 408-415
  46. Kim, C. W., 1972, “Numerical Analysis to Dynamic Buckling of Cylindrical Shell Under Lateral Impulsive Pressure,” Trans. of KSME, Vol. 12, No. 3, pp. 123-180 https://doi.org/10.1111/j.1537-2995.1972.tb05898.x
  47. Sung, Y. Lu and Kim, C. W., 1981, "Dynamic Bucking of Orthotropic Cylindrical Shells," Trans. of KSME, Vol. 5, No. 4, pp. 266-273
  48. Kim, C. W., 1983, "Dynamic Stability of Orthotropic Cylindrical Shells under Axial Compression," Trans. of KSME, Vol. 7, No. 1, pp. 73-82
  49. Kim, C. W., 1972, "Equations of Motion for Nonhomogeneous Cylindrical Shells," Trans. of KSME, Vol. 12, No. 2, pp. 89-94
  50. Lee, Y. S. and Choi, B. D., 1987, "Stress Analysis for the Orthotropic Shells Subjected to Line Load Based on Novozhilov's Shell Theory," Trans. of KSME, Vol. 11, No. 5, pp. 789-799
  51. Lee, Y. S. and Lee, H., 1989, "Static and Dynamic Analysis of Laminated Composite Axisymmetric Shells," Trans. of KSME, Vol. 13, No. 6, pp. 1203-1214
  52. Lee, Y. S. and Song, S. Y., 1998, "A Study on the Structural Stress Analysis of the Steel and the GFRP Laminated Composite Cylindrical Shells with a Stiffened Circular Cutout," Trans. of KSCM, Vol. 11, No. 4, pp. 55-62
  53. Lee, D. S., 1982, "Nonlinear Analysis if Shallow Shells and Plates by Approxinate Method," Trans. of KSME, Vol. 6, No. 2, pp. 176-182
  54. Lee, U. S., Lee, K. Y. and Zoo, Y. W., 1982, "Limit Analysis of the Cylindrical Shells under internally Localized Band Pressure," Trans. of KSME, Vol. 6, No. 1, pp. 16-26
  55. Yoo, S. H., 1993, “Analytical Methods for Plates and Shells with Discontinuities,” Trans. of KSME, Vol. 33, No. 7, pp. 636-647
  56. Won, C. J., 1993, "Nonlinear Buckling and 원통쉘 연구의 현황과 전망 17 Imperfection Sensitivity Analyses of Shell Structures," Trans. of KSME, Vol. 33, No. 7, pp. 614-627
  57. Han, B. K., Lee, S. H., Lee, J. W. and Yu, T. I., 1996, "Buckling of Composite Cylindrical Shells Subjected to Torsion or Lateral Pressure," Trans. of KSME, Vol. 33, No. 7, pp. 1436-1444
  58. Ryu, H. S. and Sin, H. C., 1997, "Two Node Meridional Strain-based Axisymmetric Shell Elements," Trans. of KSME, Vol. 21, No. 6, pp. 925-932
  59. Kwon, Y. D., Lim, B. S. and Park, Y. H., 1999, “An Improvement of Bending Characteristis for Degenerated Shell Element by Modification of Gauss Integration Weights,” Trans. of KSME, Vol. 23, No. 8, pp. 1328-1337
  60. Lee, B. C., Kim, J. H. and Lee, W. J., 1999, "A Design Curve of the Buckling Load for Cylindrical Shells with Cutouts," Trans. of KSME, Vol. 23, No. 10, pp. 1723-1731
  61. Choi, N. R. and Lee, B. C., 2000, "Estimation of Transverse Shear Stresses in Laminated Composite Structures Using 4-node Degenerated Shell Elements," Trans. of KSME, Vol. 24, No. 9, pp. 2292-2301
  62. Son, J. H. and Chae, S. W., 2004, "Automatic Generation of Finite Element Meshes on Midsurfaces in Shell Structures," Trans. of KSME, Vol. 24, No. 9, pp. 2292-2301
  63. Kim, S. H. and Lee, U. S. 2005, "Identification of the Structural Damages in a Cylindrical Shell," Trans. of KSME, Vol. 29, No. 12, pp. 1586-1596 https://doi.org/10.3795/KSME-A.2005.29.12.1586
  64. Lee, Y. S., and Ong, J. W., 1990, "Dynamic and Structural Analysis of Cylindrical Shells of Carbon-fibre-reinforced Polymer," High Temperatures and High Pressures, Springer-Verlag, Vol. 22, pp. 587-596
  65. Cho, W. M., Lee, B. E., Koo, S. H. and Lee, Y. S., 1995, "Effects of Geometric and Material Nonlinearity on the Stresses of Various Pressure Vessel Dome Shapes," Computers and Structures, Vol. 55, No. 6, pp. 1063-1075 https://doi.org/10.1016/0045-7949(94)00488-O
  66. Lee, Y. S., Choi, M. H., and Kang, Y. H., 2001,"Thermal and Mechanical Characteristics of an Instrumented Capsule for a Material Irradiation Test," Nuclear Engineering and Design, Vol. 205, No. 1-2, pp. 207-214 https://doi.org/10.1016/S0029-5493(00)00352-6
  67. Lee, Y. S., Choi, M. H., Kang, Y. H. and Shin, D. S., 2002, "A Structural Analysis of the Circular Cylinder with Multi Holes under Thermal Loading," Nuclear Engineering and Design, Vol. 212, No. 1-3, pp. 273-279 https://doi.org/10.1016/S0029-5493(01)00492-7
  68. Ryu, C. H., Lee, Y. S., Choi, M. H. and Kim, Y. W., 2004, "A Study on Stress Analysis of Composite Cylinderical Shells with a Circular or Elliptical Cutout," KSME International Journal, Vol. 18, No. 5, pp. 808-813
  69. Lee, Y. S., Choi, Y. S., Kim, H. S. and Chung, S. H., 2005, "Analysis Technology on the Temperature and Themal Stress of the Cask for Radioactive Material Transport," Key Engineering Materials, Vol. 297-300, pp. 1666-1671 https://doi.org/10.4028/0-87849-978-4.1666
  70. Lee, Y. S., Lee, J. J., Song, S. Y. and Kang, Y. K., 2006, "A Study on the Structural Stress Analysis of the Steel and the GFRP Laminated Composite Cylindrical Shell with a Stiffened Circular Cutout," Key Engineering Materials, Vol. 326-328, pp. 1837-1840 https://doi.org/10.4028/0-87849-415-4.1837
  71. Lee, Y. S., Park, J. H., Kim, J. H., Cha, K. J. and Hong, S. K., 2007, "Bauschinger Effect's Influence on the Compound Cylinder Containing an Autofrettaged Layer," Key Engineering Materials, Vol. 345-346, pp. 149-152 https://doi.org/10.4028/0-87849-440-5.149
  72. Lee, S. Y., 1988, "Formulation of Shell Finite Elements Based on a New Method of Element Decomposition," Journal of the Computational Structural Engineering Institute of Korea, Vol. 1, No. 1, pp. 67-78
  73. Lee, P. S., 1989, “Analysis of Multiple Shell Structures Subjected to Lateral Loads,” Journal of the Computational Structural Engineering Institute of Korea, Vol. 2, No. 2, pp. 73-83
  74. Woo, K. S., 1990, “Hierarchic Shell Model Based on p-Convergence,” Journal of the Computational Structural Engineering Institute of Korea, Vol. 3, No. 1, pp. 59-70
  75. Choi, C. K. and Yoo, S. W., 1990, "Nonlinear Analysis of Improved Degenerated Shell Finite Element," Journal of the Computational Structural Engineering Institute of Korea, Vol. 3, No. 3, pp. 113-123
  76. Woo, K. S., 1991, "Advanced Finite Element Technology for Fracture Mechanics Analysis of Cracked Shells," Journal of the Computational Structural Engineering Institute of Korea, Vol. 4, No. 2, pp. 77-85
  77. Cho, B. W., 1994, “Finite Element Analysis of Glass Fiber Reinforced Plastic Pipes Under Internal Pressure,” Journal of the Computational Structural Engineering Institute of Korea, Vol. 7, No. 2, pp. 101-109
  78. Byon, D. K., Yoon, S. K. and Park, S. S., 1994, “Finite Element Analysis of Bolted Connections using Joint Elements,” Journal of the Computational Structural Engineering Institute of Korea, Vol. 7, No. 2, pp. 139-146
  79. Cheong, M. C., 1997, “A Study on Maximum Responses of Rotational Shells Subjected to Uneven Settlements by Stochastic Method,” Journal of the Computational Structural Engineering Institute of Korea, Vol. 10, No. 3, pp. 175-184
  80. Kim, S. D., 1995, “Spectral Analysis of Nonlinear Dynamic Response for Dynamic Instability of Shallow Elliptic Paraboloidal Shells,” Journal of the Computational Structural Engineering Institute of Korea, Vol. 8, No. 2, pp. 153-161
  81. Cho, J. R., 1996, "Mesh Design for the Finite Element Analysis of Thin Structures with Boundary Layers," Journal of the Computational Structural Engineering Institute of Korea, Vol. 9, No. 4, pp. 165-172
  82. Kim, S. D. and Cheung, J. H., 1998, "Buckling Behavior of Transversely Isotropic Composite Shells Subjected to Axial Compression," Journal of the Computational Structural Engineering Institute of Korea, Vol. 11, No. 3, pp. 229-239
  83. Han, S. C. and Yoon, S. H., 1999, "Hygrothermal Bending Analysis of Laminated Composite Plates and Shells Considering a Higher-order Shear Deformation," Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 1, pp. 37-44
  84. Choi, C. K. and Hong, H. S., 1999, "Analysis of Shell Using the Spline Finite Strip with Drilling DOF," Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 2, pp. 185-199
  85. Jang, C. D., Jung, J. W. and Moon, S. C., 1999, "Advancing Mesh Generation in Large Deformation Analysis of Shell Structures with Advancing Front Method," Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 3, pp. 447-455
  86. Kim, S. D., Park, J. Y. and Kwun, T. J., 1999, "The Instability Behavior of Shallow Sinusoidal Arches(1):Classification of Dynamic Buckling under Step Pressure," Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 3, pp. 407-415
  87. Kim, S. D., Park, J. Y. and Kwun, T. J., 1999, "The Instability Behavior of Shallow Sinusoidal Arches(2):Classification of Dynamic Buckling under Step Pressure," Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 3, pp. 417-426
  88. Choi, C. K. and Noh, H. C., 2000, "Statistical Behavior of RC Cooling Tower Shell due to Shape Imperfection,"Journal of the Computational Structural Engineering Institute of Korea, Vol. 13, No. 1, pp. 147-158
  89. Choi, M. S., Kim, M. Y. and Chang, S. P., 2000, "Geometrically Nonlinear Analysis of Stiffened Shell Structures Using the Assumed Strain Shell Element,"Journal of the Computational Structural Engineering Institute of Korea, Vol. 13, No. 2, pp. 209-220
  90. Kim, M. Y., Choi, M. S. and Chang, S. P., 2000, "Ultimate Strength Analysis of Stiffened Shell Structures Considering Effects of Residual Stresses," Journal of the Computational Structural Engineering Institute of Korea, Vol. 13, No. 2, pp. 197-208
  91. Nam, M.H. and Lee, K. H., 2000, "A somple analysis of the Cylindrical Shell Subjected to a Nonaxisymmetric Load," Journal of the Computational Structural Engineering Institute of Korea, Vol. 13, No. 2, pp. 179-187
  92. Seo, K. J., Min, B. C. and Kim, M. Y., 2000, "Spatial Free Vibration and Stability Analysis of Thin-Walled Curved Beams with Variable Curvatures," Journal of the Computational Structural Engineering Institute of Korea, Vol. 13, No. 3, pp. 321-328
  93. Choi, C. K., Kim, K. H. and Kim, J. B., 2001, "A study on Optimal of Cross Beam of Standard P.S.C Girder Bridge by Static Analysis," Journal of the Computational Structural Engineering Institute of Korea, Vol. 14, No. 1, pp. 43-55
  94. Lee, S. J. and Seo, J. M., 2001, "A 9-node Degenerated Shell Element for Inelastic Analysis of Reinforced Concrete Structures," Journal of the Computational Structural Engineering Institute of Korea, Vol. 14, No. 4, pp. 481-494
  95. Lee, S. J., 2002, "The Dynamic Nonlinear Analysis of Shell Containment Building subjected to Aircraft Impact Loading," Journal of the Computational Structural Engineering Institute of Korea, Vol. 15, No. 4, pp. 567-578
  96. Kim, J. G. and Loh, B. G., 2003, "Static and Vibration Analysis of Axisymmetric Shells Using Mixed Finite Element," Journal of the Computational Structural Engineering Institute of Korea, Vol. 16, No. 2, pp. 165-172
  97. Lee, K. H., Park, J. Y. and Kim, W. J., 2004, "An Analysis of axisymmetric Cylindrical Shell by the Leading Matrix Method," Journal of the Computational Structural Engineering Institute of Korea, Vol. 17, No. 2, pp. 193-201
  98. Lee, H. P. and Choun, Y. S., 2006, "Shell Finite Element for Nonlinear Analysis of Reinforced Concrete Containment Building,"Journal of the Computational Structural Engineering Institute of Korea, Vol. 19, No. 1, pp. 93-103
  99. Cho, M. H., Choi, J. B. and Roh, H. Y., 2007, "Integration of Shell Analysis and Surface Modeling," Journal of the Computational Structural Engineering Institute of Korea, Vol. 20, No. 2, pp. 181-190
  100. Kim, S. B., Han, M. Y. Kim, M. Y., Ji, T. S. and Jung, K. H., 2007, "Flexural Behavior of Steel Composite Beam with Built-up Cross-section by Bolt Connection,"Journal of the Computational Structural Engineering Institute of Korea, Vol. 20, No. 2, pp. 207-216
  101. Kim, K. D., Byun, Y. J., Kim, H. K., Lomboy, G. R., S. Songsak, and Kim, Y. h., 2007, "Development of Quasi-Conforming Shell Element for the Three Dimensional Construction Stage Analysis of PSC Bridge," Journal of the Computational Structural Engineering Institute of Korea, Vol. 20, No. 3, pp. 329-338
  102. Hwang, D. S., 1998, "CLA Model and Assessment of Satellite," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 26, No. 7, pp. 108-222
  103. Hwang, D. S., 1999, "Pointing Error Analysis of Satellite under On-Orbit Thermal Environments'', Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 27, No. 1, pp. 145-151
  104. Hwang, D. S., 1999, "Design and Analysis of Satellite Structure,"Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 27, No. 2, pp. 111-121
  105. Kim, J. H., Kim, S. H., Rhee, J. H. and Hwang, D. S., 2000, "The Design and Analysis of KOMPSAT SDM," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 28, No. 5, pp. 133-140
  106. Lee, H. H., Rhee, J. H., Hwang, D. S., Kim, S. H., Kim, J. H. and Kim, H. J., 2002, "Structural Loads Prediction of KOMPSAT-1 by Coupled Loads Analysis," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 30, No. 3, pp. 123-129 https://doi.org/10.5139/JKSAS.2002.30.3.123
  107. Ko, D. W. and Hong, C. S., 1984, "Buckling Analysis of Laminated composite Cylindrical Shell by the Finite Element Method," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 12, No. 1, pp. 1085-1094
  108. Cho, C. M. and Hong, C. S., 1985, "Finite Element Analysis of Laminated Composite Shell," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 13, No. 2, pp. 2017-2031
  109. Kim, K. S. and Kim, H. W., 1990, “A Study on Structure Analysis of a Multi-Cell Box Beam Type Wing," Vol. 18, No. 4, pp. 4067-4075
  110. Kim, J. H., 1994, “An Assumed Strain Shell Element Model by Allowing Transverse Shear Deformation and Thickness Change,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 22, No. 3, pp. 3025-3031
  111. Kim, J. H., 1995, “Large Deformation Analysis of Laminated Composite Shells with Stabilization Matrix,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 23, No. 2, pp. 2069-2074
  112. Yang, M. S. and Lee, Y. W., 1997, “A Study on the Measurement of Roll Moment of Inertia of a Large Cylindrical Shell,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 25, No. 6, pp. 163-170
  113. Kong, C. and Kim, K., 1998, "An Experimental and Analytocal Study for Structural Behaviors of Carbon/Epoxy Propeller Blade with The Shell-Spar-Foam," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 26, No. 2, pp. 166-343,1998
  114. Kim, J. H. and Kim, Y. H., 1999, “An Assumed Strain Solid Triangular Element Formulation for the Efficient Analysis of Plates and Shells,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 27, No. 3, pp. 78-82
  115. Kim, J. H. and Kim, Y. H., 2001, “A Three Node Triangular Shell Element Formulation Based on the Assumed Natural Strain,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 29, No. 4, pp. 64-70
  116. Kim, C., Lee, S. H. and Cho, M. H., 2003, “Shape Recovery Analyses of SMA Actuator Activated Composite Shells considering 3-D SMA Material Behaviors,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 31, No. 4, pp. 44-52 https://doi.org/10.5139/JKSAS.2003.31.4.044
  117. Kim, C. H., 2005, “Curved Quadratic Triangular Degenerated Shell Elements for Geometric Non-linear Analysis,”Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 33, No. 2, pp. 46-53 https://doi.org/10.5139/JKSAS.2005.33.2.046
  118. Shul, C. W. and Lee, K. B., 2005, "Experimental Evaluation Study on the Integrity of Plastic Shell Structure Using Acoustic Emission Technique," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 33, No. 12, pp. 39-47 https://doi.org/10.5139/JKSAS.2005.33.12.039
  119. Lee, Y. S, Kang, M. J. and Cho, W. M. 1992, "A Study on the Burst Pressure of Circular Tubes," Trans. of KSME, Vol. 16, No. 6, pp. 1056-1063
  120. Kim, I. W, Lee, S. B., Rew, J. B., Choi, Y. J. and Lee, Y. S., 1993, "A Study on the Behaviour of Axisymmetric Outer Tube and Inner Movable Part Under Pressure and Thermal Load.," Journal of the Korean Society of Precision Engineering, Vol. 10, No. 1, pp. 114-125
  121. Koh, S. and Lee, Y. S., 1993, "Finite Element Analysis of Pipe Whip Restraint Behavior under Jet Thrust Forces," Journal of the Korean Nuclear Society, Vol. 25, No. 3, pp. 353-360
  122. Cho, W. M., Lee, Y. S. and Youn, S. K., 1993, "Nonlinear Numerical Analysis and Experiment of Composite Laminated Shell," Trans. of KSME, Vol. 17, No. 8, pp. 2051-2060
  123. Lee, Y. S., Cho, W. M., Lee, B. E. and Koo, S. H., 1993, "Onlinear Stress Analysis of Pressure Vessel for Various Dome Shapes and Thicknesses," Trans. of KSME, Vol. 17, No. 10, pp. 2634-2645
  124. Lee, Y. S., Choi, Y. J. and Kang, Y. H., 2004, "Temperature Analysis of the Cylindrical Structure with Multi-Holes of HANARO Irradiation Test," Journal of the Computational Structural Engineering Institute of Korea, Vol. 17. No. 4, pp. 405-412
  125. Jeon, S. Y. and Lee, Y. S, 2005, "A Study on the Buckling Characteristics of Spacer Grids in Pressurized Water Reactor Fuel Assembly," Journal of the Computational Structural Engineering Institute of Korea, Vol. 18, No. 4, pp. 405-416
  126. Kim, C. W. and Lee, Y. S., 1977, "Elastic-plastic Analysis of the Autofrettage Process by a Mechanical-push Swaging," Trans. of the KSME, Vol. 1, No. 1, pp. 40-47
  127. Sonn, S. Y., Shin, K. H. and Kim, S. Y., 1980, "Fundamentals on Swaging Autofrettage Analysis and Its Application to the Design and Manufacturing Process of the Thick Cylinders (I) -Based on the Plane strain field and Tresca's Yield Criterion," Trans. of KSME, Vol. 4, No. 2, pp. 54-62
  128. Sonn, S. Y. and Kim, S. Y., 1981, "Fundamentals on the Analysis of the Swaging Autofrettage and its Application to the Design and Manufacturing Process of the Thick Cylinders (II) -Development of a Computer Program for the Design and the Processing of Thick Cylinders-," Trans. of KSME, Vol. 5, No. 4, pp. 362-367
  129. Lee, S. I., Kim, Y. I., Koh, S. K., Chung, S. H. and Lee, S. W., 1997, "Low Cycle Fatigue Life Evaluation of External Grooved C-shaped Specimen," Trans. of the KSME(A), Vol. 21, No. 2, pp. 199-208
  130. Lee, S. I., Kim, J. Y., Chung, S. H. and Koh, S. K., 1998, "Fatigue Crack Propagation Life Evaluation of an Autofrettaged Thick-Walled Cylinder," Trans. of the KSME, Vol. 22, No. 2, pp. 321-329
  131. Park, J. H., Lee, Y. S., Kim, J. H., Cha, K. U. and Hong, S. K., "Machining Analysis of the Autofrettaged Compound Cylinder," Trans. of KSME (A), Vol. 31, No. 7, pp. 800-807 https://doi.org/10.3795/KSME-A.2007.31.7.800
  132. Park, J. H., Lee, Y. S., Kim, J. H., Cha, K. U. and Hong, S. K., 2008, "Machining Effect of the Autofrettaged Compound Cylinder under Varying Overstrain Level," Journal of Material Processing Technology, Vol. 201, No. 1-3, pp. 491-496 https://doi.org/10.1016/j.jmatprotec.2007.11.182
  133. Lee, Y. S. Jun, B. H. and Oh, J. M., 1997, "A Study on the Design Optimization of Composite Cylindrical Shells with Vibration, Buckling Strength and Impact Strength Characteristics," Trans. of KSAE, Vol. 5, No. 4, pp. 48-69
  134. Myung, C. M., Lee, Y. S. and Ryu, C. H., 2001, "A Study on the Prediction of the Loaded Location of the Compoiste Laminated Shell by Using Neural Networks," Trans. of KSME, Vol. 14, No. 5, pp. 26-37
  135. Myung, C. M., Lee, Y. S. and Seo, I. S., 2002, "Prediction of the Loading Characteristics by Neural Networks Using Structural Analysis of Composite Cylindrical Shells," Journal of the Computational Structural Engineering Institute of Korea, Vol. 15, No. 1, pp. 137-146
  136. Lee, Y. S. and Lee, K. D., 1993, "On the Dynamic Response of Laminated Circular Cylindrical Shells under Dynamic Loads," Trans. of KSME, Vol. 17, No. 11, pp. 2684-2693
  137. Lee, Y. S., Oh, J. S. Kang, K. H. and Choi, B. D., 1998, "A Study of Penetration History of Conically-Nosed Bullet on Layered Targets," Trans. of KSME, Vol. 22, No. 6, pp. 1022-1035
  138. Lee, Y. S., Kang, K. H., Choi, B. D., Park, K. J., Chung, S. K. and Oh, J. S., 1998, "A Study on the Penetration Characteristics of the Rigid Impactor into the Lead Target," Journal of the Computational Structural Engineering Institute of Korea, Vol. 11, No. 4, pp. 147-154
  139. Lee, Y. S. and Kim, Y. J., 1993, "A Study on the Dynamic Behaviors of a Shipping Container Under Drop Impact Loading," Trans. of KSME, Vol. 18, No. 11, pp. 2805-2816
  140. Lee, Y. S., Lee, H. C., Chung, S. H., Lee, H. Y. and Kim, Y. J., 2001, "Structural Analysis for the Container-Shped Type A Package of Radioactive Materials," Journal of the Computational Structural Engineering Institute of Korea, Vol. 14, No. 2, pp. 143-150
  141. Lee, Y. S., Choi, Y. J., Kim, S. J., Kim, Y. J. and Lee, J. H., 2005, "A Study on the Free Drop Impact Characteristics of Spent Nuclear Fuel Shipping Casks by LS-DYNA3D and ABAQUS/Explicit Code," Journal of the Computational Structural Engineering Institute of Korea, Vol. 18, No. 1, pp. 43-49
  142. Lee, Y. S., Kim, Y. J. and Choi, Y. J., 2005, "Formulation on the Empirical Equation of the Cask Impact Forces by Dimensional Analysis," Journal of the Computational Structural Engineering Institute of Korea, Vol. 18, No. 3, pp. 245-254
  143. Kim, Y. J., Lee, Y. S., Choi, Y. J. and Kim, W. T., 2005, "A Study on the Dynamic Impact Response Analysis of Cask by Modal Superposition Method," Journal of the Computational Structural Engineering Institute of Korea, Vol. 18, No. 4, pp. 373-383
  144. Lee, Y. S., and Lee, K. D., 1997, "On the Dynamic Response of Laminated Circular Cylindrical Shells Under Impulse Loads," Computers and Structures, Vol. 63, No. 1 pp. 149-158 https://doi.org/10.1016/S0045-7949(96)00312-4
  145. Lee, Y. S., Kim, H. S., Kang, Y. H., Chung, S. H. and Choi, Y. J., 2004, "Effect of Irradiation on the Impact and Seismic Response of a Spent Fuel Storage and Transport Cask," Nuclear Engineering and Design, Vol. 232, pp. 123-129 https://doi.org/10.1016/j.nucengdes.2004.05.001
  146. Lee, Y. S., Kim, H. S., Choi, Y. J. and Kim, Y. J., 2005, "Analysis Technology on the Thick Plate Free Drop Impact of the Cask for Radioactive Material Transport," Key Engineering Materials, Vols.297-300, pp. 1350-1355 https://doi.org/10.4028/0-87849-978-4.1350
  147. Lee, Y. S., Ryu. C. H., Kim, H. S., and Choi, Y. J., 2005, "A Study on the Free Drop Impact of Cask by Commercial FEM Codes," Nuclear Engineering and Design, Vol. 235, No. 6, pp. 2219-2226 https://doi.org/10.1016/j.nucengdes.2005.03.009
  148. Lee, Y. S., Kim, Y. J., Choi, Y. J. and Lee, E. Y., 2008, "Formulation on the Empirical Equation of the Cask Impact Forces by Dimensional Analysis," International Journal of Modern Physics B Vol. 22, No. 9, pp. 1612-1617 https://doi.org/10.1142/S0217979208047158
  149. Lee, J. H., Kim. J. H, Lee, J. J., Lee, Y. S., Koo, S. H. and Moon, S. I., 2008, "Impact Simulation and Analysis of a Glass Ceramic Spherical Dome," International Journal of Modern Physics B, Vol. 22, No. 9, pp. 1483-1488 https://doi.org/10.1142/S0217979208046967
  150. Lee, J. Y. and Kang, Y. C., 1997, "Chaotic Response of a Spherical Shell to Impulsive Loading," Journal of the Computational Structural Engineering Institute of Korea, Vol. 10, No. 3, pp. 167-174
  151. Song, H. W., Bang, J. Y., Byun, K. J. and Choi, K. R., 1999, "Failure Analysis of RC Cylindrical Structures using Layered Shell Element with a Pressure Node," Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 3, pp. 475-484
  152. Lee, Y. S., Koh, S. and Nho, S. H., 1995, " A Study on the Transsient Analysis of Pipe and Resranint Due to Impact Loading," Trans. of KSME, Vol. 19, No. 11, pp. 2757-2768
  153. Lee, Y. S., Moon, H. K. and Yoon, J. H., 1986, "Free Vibration Analysis of Clamped-Tree Laminated Otrhotropic Circular Cylindrical Shells," Trans. of KSME, Vol. 10, No. 6, pp. 929-936
  154. Lee, Y. S. and Moon, H. K., 1988, "Vibration Analysis of Laminated Graphite-Epoxy Circular Cylindrical Shells," Trans. of KSME, Vol. 12, No. 4, pp. 670-674
  155. Lee, Y. S. and Chang, S. J., 1989, "Vibration Analysis of Hybrid Laminated Composite Cylindrical Shells," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 17, No. 3, pp. 45-59
  156. Lee, Y. S. and Kang, I. S., 1989, "Free Vibration of Orthotropic Laminated Composite Conical Shells," Trans. of KSME, Vol. 13, No. 4, pp. 595-603
  157. Lee, Y. S., Ahn, S. K. and Lee, U. S., 1989, "Buckling and Vibration of Laminated composite Non-Circular Cylindrical Shells," Trans. of KSME, Vol. 13, No. 5, pp. 807-819
  158. Lee, Y. S. and Kim, Y. W., 1996, "Vibration Analysis of the Rotating Hybrid Cylindrical Shells Laminated with Metal and Composite," Trans. of KSME, Vol. 20A, No. 3, pp. 968-977
  159. Yim. J. S. and Lee, Y. S., 1996, "Free Vibration Anaysis of Clamped-Free Circular Cylindrical Shells with Circular Plate at Top," Trans. of KSNVE, Vol. 6, No. 6, 801-818
  160. Yim. J. S., Lee, Y. S. and Sohn, D. S., 1996, "Free Vibration Analysis of the Cantilevered Circular Cylindrical Shells Combined with Circular Plates at Axial Positions," Trans. of KSNVE, Vol. 7, No. 2, pp. 331-346
  161. Lee, Y. S. and Choi, M. H., 1999, "A Study on the Vibration Characteristics of Steel and Plain Weave Composite Cylindrical Shells Comined with Internal Plate Structures," Trans. of KSNVE, Vol. 9, No. 1, pp. 149-162
  162. Lee, Y. S., Choi, M. H. and Shin, D. S., 1999, "Free Vibration Characteristics of the Steel and GFRP Composite Cylindrical Shells with Simply Supported Conditions," Trans. of KSNVE, Vol. 9, No. 2, pp. 273-284
  163. Lee, Y. S. and Choi, M. H., 1999, "Free Vibration of Composite Cylindrical Shells with a Longitudinal, Interior Rectangular Plate," Trans. of KSCM, Vol. 12, No. 5, pp. 65-79
  164. Han, C. H. and Lee, Y. S., 2001, "A Study on the Vibrational Characteristics of the Continuous Circular Cylindrical Shell with the Multiple Supports Using the Experimental Modal Analysis," Trans. of KSNVE, Vol. 11, No. 4, pp. 43-51
  165. Han, C. H. and Lee, Y. S., 2002, "Vibration Analysis of the Continuous Circular Cylindrical Shell with the Clampted-clamped Supports at Two End Edges," Trans. of KSNVE, Vol. 12, No. 2, pp. 97-107 https://doi.org/10.5050/KSNVN.2002.12.2.097
  166. Jeong, K. H., Kwon, D. G., Lee, S. C. and Park, J. S., 1995, "The Effect of Liquid Level on Free Vibration of a Liquid-Filled Circular Cylindrical Shell," Trans. of KSME, Vol. 19, No. 12, pp. 3205-3215, 1995
  167. Kim, J. H., Kim, H. S. and Kim, Y. Y, 2000, “Free Vibration Analysis of a T Joint Using Thin-Walled Beam and Shell Elements,” Trans. of KSME, Vol. 24, No. 9 pp. 2334-2343
  168. Kim, Y. W. and Chung, K., 2005, “Free Vibration Analysis of Combined Cylindrical Shells with an Annular Plate Considering Additional Deformations,” Trans. of KSME (A), Vol. 29, No. 3, pp. 439-446 https://doi.org/10.3795/KSME-A.2005.29.3.439
  169. Lee, Y. S., Yang, M. S., Kim, H. S., and Kim, J. H., 2002, "A Study on the Free Vibration of the Joined Cylindrical-Spherical Shell Structures," Computers & Structures, Vol. 80, No. 27-30, pp. 2405-2414 https://doi.org/10.1016/S0045-7949(02)00243-2
  170. Lee, Y. S., Choi, M. H., and Kim, J. H., 2003, "Free Vibrations of Laminated Composite Cylindrical Shells with an Interior Rectangular Plate," Journal of Sound and Vibration, Vol. 265, No. 4, pp. 795-817 https://doi.org/10.1016/S0022-460X(02)01236-1
  171. Yim, J. S., Sohn, D. S., and Lee, Y. S., 1998, "Free Vibrations of Clamped-Free Circular Cylindrical Shell with a Plate Attached at an Arbitrary Axial Position," Journal of Sound and Vibration, Vol. 213, No. 1, pp. 75-88 https://doi.org/10.1006/jsvi.1997.1498
  172. Lee, Y. S. and Kim, Y. W., 1999, "Nonlinear Free Vibration Analysis of the Rotating Hybrid Cylindrical Shells," Computers and Structures, Vol. 70, No. 2, pp. 161-168 https://doi.org/10.1016/S0045-7949(98)00155-2
  173. Lee, Y. S., Choi, M. H., 2001, "Free Vibrations of Circular Cylindrical Shells with an Interior Plate Using the Receptance Method," Journal of Sound and Vibration, Vol. 248, No. 3, pp. 477-497 https://doi.org/10.1006/jsvi.2001.3824
  174. Ji, Y. K. and Lee, Y. S., 2002, "Evaluation of Analytical Vibration Characteristics for Triple Cylindrcal Shells Filled with Fluid," Trans. of KSNVE, Vol. 12, No. 2, pp. 150-160 https://doi.org/10.5050/KSNVN.2002.12.2.150
  175. Lee, Y. S. and Han, C. H., 2000, "A Free Vibration Analysis of the Continuous Circular Cylindrical Shell with the Multiple Simple Suports Using the Receptance Method," Trans. of KSNVE, Vol. 10, No. 6, pp. 998-1008
  176. Kim, Y. W., and Lee, Y. S., 2004, "Coupled Vibration Analysis of Liquid-Filled Rigid Cylinderical Storage Tank with an Annular Plate Cover," Journal of Sound and Vibration, Vol. 279, No. 1-2, pp. 217-235 https://doi.org/10.1016/j.jsv.2003.10.032
  177. Lee, Y. S., Kim, H. S., and Han, C. H., 2006, "A Study on the Vibrational Characteristics of the Continuous Circular Cylindrical Shell with Multiple Supports Using the Experimental Modal Analysis," Key Engineering Materials, Vol. 326-328, pp. 1617-1620 https://doi.org/10.4028/0-87849-415-4.1617
  178. Jung, M. J., Song, S. H., Jeong, K. H. and Kim, T. H., 1999, "Modal Analysis of Cylindrical Shell using a Scale Model of the Core Support Barrel," Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 1, pp. 15-27
  179. Kang, J. H., Yang, K. H. and Chang, K. H., 2002, "Three-Dimensional Vibration Analysis of Thick Shells of Revolution," Journal of the Computational Structural Engineering Institute of Korea, Vol. 15, No. 3, pp. 399-407
  180. Shim, H. J., Chang, K. H. and Kang, J. H., 2003, "Three-Dimensional Vibration Analysis of Solid and Hollow Hemispheres Having Varying Thickness,"Journal of the Computational Structural Engineering Institute of Korea, Vol. 16, No. 2, pp. 197-206
  181. Shim, H. J. and Kang, J. H., 2003, "Vibration Analysis of Thick Hyperboloidal Shells of Revolution from a Three-Dimensional Analysis," Journal of the Computational Structural Engineering Institute of Korea, Vol. 16, No. 4, pp. 419-429
  182. Jhung, M. J and Jo, J. C., 2006, "Free Vibration Analysis of Perforated Shell Submerged in Fluid," Journal of the Computational Structural Engineering Institute of Korea, Vol. 19, No. 3, pp. 247-258
  183. Shin, D. K., 1995, “Nonlinear Vibrations of Symmetrically Laminated Moderately Thick Shallow Shells,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 23, No. 6, pp. 6082-6094
  184. Lee, Y. S. and Cheon, I. H., 1990, "Vibration Characteristics of Pipe Element Containing Moving Medium by a Transfer Matrix," Trans. of KSME, Vol. 15, No. 1, pp. 366-375
  185. Lee, Y. S., Kang, E. S., Kim, Y. H., Moon, H. K., Oh, J. M. and Byun, Y. C., 1997, "Development of a Cylindrical Type Piezoelectric Vibrating Gyroscope," Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 25, pp. 106-116
  186. Lee, Y. S., Kang, E. S., Choi, M. H. and Shin, D. S., 2000, "Evaluation of Structural Integrity for HANARO Capsule Structure by Vibration Test and Analysis," Trans. of KSNVE, Vol. 10, No. 2, pp. 261-268
  187. Kim, Y. W., Bae, Y. C. and Lee, Y. S., 2005, "Countermeasure on High Vibration of Branch Pipe with Pressure Pulsation Transmitted from Main Steam Header," Trans. of KSNVE, Vol. 15, No. 8, pp. 988-995 https://doi.org/10.5050/KSNVN.2005.15.8.988
  188. Kim, C. W. and Kim, C. K., 1992, “Dynamic Behavior of Laminated Orthotropic Cylindrical Shells,” Trans. of KSME, Vol. 16, No. 10, pp. 1807-1815
  189. Lee, Y. S. and Kim, Y. W., 1996, "Buckling and Vibration Analysis of the Axially Stiffened Composite Laminated Cylindrical Shells," Trans. of KSME, Vol. 20, No. 7, pp. 2223-2233
  190. Lee, Y. S. and Kim, Y. W., "Study on the Orthogonal Stiffening Characteristics for the Natural Frequencies and Buckling Loads of the Composite Laminated Cylindrical Shells," Trans. of KSNVE, Vol. 6, No. 4, pp. 457-467
  191. Youm, K. U., Yoon, K. H., Lee, Y. S. and Kim, J. K., 1996, "Dynamic Behavior Analysis of Stiffened Cylindrical Shell Filled with Fluid," Trans. of KSME, Vol. 20, No. 9, pp. 2875-2886
  192. Lee, Y. S. and Kim, Y. W., 1997, "Vibration Analysis of the Rotating Composite Cylindrical Shells with Orthogonal Stiffeners," Trans. of KSCM, Vol. 10, No. 1, pp. 12-22
  193. Kim, Y. W. and Lee, Y. S., 1999, "Vibration Characteristics of Ring-Stiffened Composite Cylindrical Shells with Various Edge Boundary Conditions," Trans. of KSNVE, Vol. 9, No. 3, pp. 485-492
  194. Lee, Y. S., Ryu, C. H. and Kim, Y. W., 1999, "Stress Analysis of the Cylindrical Shells with a Reinforced Circular or an Elliptical Cutout Under the Axial Compression," Trans. of KSME, Vol. 23, No. 10, pp. 1827-1836
  195. Kim, Y. W. and Lee, Y. S., 1999, "Vibration Analysis of Ring Stiffened Cylindrical Shells with a Rectangular Cutout," Trans. of KSME, Vol. 23, No. 11, pp. 2040-2049
  196. Lu, S. Y. and Kim, C. W., 1981, "Dynamic Bucking of Orthotropic Cylindrical Shells," Trans. of KSME, Vol. 5, No. 4, pp. 266-273
  197. Koo, J. S., Kwon, O. G., Choi, J. M. and Kwon, Y. D, 1992, "Design Strategy of Stiffened Composite Shell Structure to Improve the Buckling Strength Using Numerical Experiments Based on Orthogonal Arrays," Trans. of KSME, Vol. 16, No. 3, pp. 527-539
  198. Kim, Y. W., Park, G. S. and Min, O. K., 1991, "Stiffener Elements of Eccentrically Stiffened Plate/Shell," Trans. of KSME, Vol. 15, No. 3, pp. 789-798
  199. Lee, W. J. and Lee, B. C., 2000, "An Eccentric Degenerated Shell Element for the Geometrically Nonlinear Analysis of Stiffened Structures," Trans. of KSME (A), Vol. 24, No. 7, pp. 1721-1730
  200. Kim, Y. W., 2001, "Transient Analysis of Composite Cylindrical Shells with Ring Stiffeners," Trans. of KSME, Vol. 25, No. 11, pp. 1802-1812
  201. Lee, Y. S. and Kim, Y. W., 1998, "Vibration Analysis of the Rotating Composite CylindricalShells with Orthogonal Stiffeners," Computers and Structures, Vol. 69, No. 2, pp. 271-281 https://doi.org/10.1016/S0045-7949(97)00047-3
  202. Lee, Y. S. and Kim, Y. W., 1999, "The Effect of Boundary Conditions on the Natural Frequencies for the Rotating Composite Cylindrical Shells with Orthogonal Stiffeners" Advances in Engineering Software, Vol. 30, No. 9-11, pp. 649-655 https://doi.org/10.1016/S0965-9978(98)00115-X
  203. Kim, Y. W., Lee, Y. S, 2002, "Transient Ananlysis of Ring-Stiffened Composite Cylindrical Shells with Both Edges Clamped," Journal of Sound and Vibration, Vol. 252, No. 1, pp. 1-17 https://doi.org/10.1006/jsvi.2001.4020
  204. Kim, Y. W., Lee, Y. S. and Ko, S. H., 2004, "Couple Vibration of Partially Fluid-Filled Cylindrical Shells with Ring Stiffeness," Journal of Sound and Vibration, Vol. 276, No. 3-5, pp. 869-897 https://doi.org/10.1016/j.jsv.2003.08.008
  205. Lee, Y. S., and Kim, D. W., 1989, "A Study on the Optimization of the Stiffened Cylindrical Shell," Trans. of KSME, Vol. 13, No. 2, pp. 205-212
  206. Lee, Y. S. and Kim, Y. W., 1998, "Study on Structural Vibration Analysis and Design Optimization of Rotating Composite Cylindrical Shells with Cutout," Trans. of KSNVE, Vol. 8, No. 3, pp. 467-476
  207. Park, K. S. and Youn, S. K., 2007, "Lightweight Design of Shell Structures Using Adaptive Inner-Front Level Set Based Topology Optimization," Trans. of KSME, Vol. 31, No. 12, pp. 1180-1187 https://doi.org/10.3795/KSME-A.2007.31.12.1180
  208. Won, C. J., 1992, "A Study on the Minimum Weight Design of Stiffened Cylindrical Shells",Trans. of KSME, Vol. 16, No. 4, pp. 630-648
  209. Lee, Y. S., Kim, Y. W., Cho, W. M. and Oh, K. H., 1994, "Optimal Thickness Design Ellipsoidal and Tori-Spherical Pressure Vessel Domes," Trans. of KSME, Vol. 18, No. 3, pp. 702-715
  210. Lee, Y. S. and Ryu, C. H., 2007, "A Study on Ranked Bidirectional Evolutionary Structural Optimization(R-BESO) Method for Fully Stressed Structure Design Based on Displacement Sensitivity," Journal of Mechanical Science and Technology, Vol. 21 No. 12, pp. 1994-2004 https://doi.org/10.1007/BF03177457
  211. Kim, H. S. and Lee, Y. S., 2008, "Optimization Design Technique for Reduction of Sloshing by Evolutionary Methods," Journal of Mechanical Science and Technology, Vol. 22, No. 1, pp. 25-33 https://doi.org/10.1007/s12206-007-1003-z
  212. Kim, I. Y. and Kwak, B. M., 1994, "Shape Design Sensitivity Analysis and Optimization of Axisymmetric Shell Structures," Journal of the Computational Structural Engineering Institute of Korea, Vol. 7, No. 2, pp. 147-153
  213. Lim, O. K., Lee, B. W., Jeon, W. S. and Jeong, H. G., 1995, "Optimum Design of the Cylindrical Shell under External Pressure Loading," Journal of the Computational Structural Engineering Institute of Korea, Vol. 8, No. 1, pp. 85-94
  214. Lee, S. J. and Han, S. E., 1999, "A Study on the Shape and Thickness Optimizations of Shells Using CAGD through Minimization of Strain Energy with Volume Constraint," Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 4, pp. 551-561
  215. Lee, S. J., 2000, "Shape and Thickness Optimizations of Prismatic Shells Using a Simple Sweep Geometric Model," Journal of the Computational Structural Engineering Institute of Korea, Vol. 13, No. 2, pp. 221-230
  216. Cho, M. H., Roh, H. Y. and Kim, H. C., 2004, "Geometric Modeling, Finite Element Analysis, and Shape Optimization of Shell Structures," Journal of the Computational Structural Engineering Institute of Korea, Vol. 17, No. 1, pp. 25-33
  217. Lee, S. J., 2004, "A Perceptive Opinion on Dedign Optimization for Shell Structures," Journal of the Computational Structural Engineering Institute of Korea, Vol. 17, No. 2, pp. 24-30
  218. Yang, W. J. and Choi, J. H., 2007, "A Study on Shape Optimum Design for Stability of Elastic Structures," Journal of the Computational Structural Engineering Institute of Korea, Vol. 20, No. 1, pp. 75-82
  219. Lee, Y. S., Kim, I. G. and Hwang, D. S., 2004, “Optimization Method of Structure by Using Coupled Load Analysis,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 32, No. 6, pp. 34-48 https://doi.org/10.5139/JKSAS.2004.32.6.034
  220. Hwang, D. S., Lee, Y. S. and Kim, I. G., 2002, “Optimization of Spacecraft Structure by Using Coupled Load Analysis,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 30, No. 4, pp. 106-113 https://doi.org/10.5139/JKSAS.2002.30.4.106
  221. Hwang, D. S., Lee, Y. S. and Kim, I. G., 2002, "A Study on the Optimization of a Spacecraft Structure by Using Coupled Load Analysis Model and Modal Transient Analysis,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 30, No. 1, pp. 132-138 https://doi.org/10.5139/JKSAS.2002.30.1.132
  222. Kim, H. C., Rho, H. Y. and Cho, M. H., 2003, “Development of Framework of Linkage between geometric Modeling and Finite Element Analysis for Shape Optimization of Shell Surfaces,” Journal of the Korean Society of Aeronautical and Space Sciences, Vol. 31, No. 8, pp. 27-35 https://doi.org/10.5139/JKSAS.2003.31.8.027
  223. Lee, Y. S. and Cho, W. M., 1991, "Shape Design of Pressure Vessel Dome," Trans. of KSME, Vol. 15, No. 3, pp. 1057-1062
  224. Lee, Y. S. and Kang, I. S., 1989, "Free Vibration of Orthotropic Laminated Composite Conical Shells," Trans. of KSME, Vol. 13, No. 4, pp. 595-603
  225. Lee, D. S., 1980, "Stress Distribution on Shallow Conical Shell under Arbitrary Loads," Trans. of KSME, Vol. 4, No. 3, pp. 127-130
  226. Yum, Y. H., Kwak, J. K. and Chung, S. C., 1982, "A Study on the Natural Frequencies of the Sound Emitted by Thin Conical Shell," Trans. of KSME, Vol. 6, No. 4, pp. 353-360
  227. Chung, S. C., Kong, C. D. and Yum, Y. H., 1986, "Modal Analysis of the Bell Type Shell with Thickness and Asymmetric Effects," Trans. of KSME, Vol. 10, No. 3, pp. 383-391
  228. Hong, J. S. and Lee, J. M., 1990, "A Study on the Analysis of Acoustic Radiation of Axisymmetric Shells," Trans. of KSME, Vol. 14, No. 4, pp. 803-809
  229. Lee, M. H., Lee, B. H. and Lee, S. Y., 2002, “Interactions of Spherical Acoustic Shock Waves with a Spherical Elastic Shell near a Free-Surface,” Trans. of KSME, Vol. 26, No. 6, pp. 1143-1148 https://doi.org/10.3795/KSME-A.2002.26.6.1143
  230. Lee, Y. S., and Seon, Y., 1997, "A Modified Solution of Radial Nozzle with Thick Reinforcement in Spherical Pressure Vessel Head Subjected to Radial Load," Nuclear Engineering and Design, Vol. 178, No. 2, pp. 185-194 https://doi.org/10.1016/S0029-5493(97)00222-7

피인용 문헌

  1. A Study on the Optimization of the Natural Frequency of a Ring-Stiffened Cylindrical Shell vol.36, pp.3, 2012, https://doi.org/10.3795/KSME-A.2012.36.3.305