Acknowledgement
Supported by : POSCO, 한국과학재단
References
- O. Kato and T. Kawanami, J. Jpn. Soc. Technol. Plast. 28, 264 (1987)
- O. Kato and T. Kawanami, J. Jpn. Soc. Technol. Plast. 30, 103 (1989)
- O. Kato, S. Uchida, and T. Kimuma, Seitetsu Kenkyu 335, 35 (1989)
- T. Nakanishi, J. Soc. Tribologists and Lubricant Engineers 49, 365 (1993)
- S. Uchida, H. Yamamoto, M. Akata, K. Watanabe, and O. Kato, What's New in Roll Technologies of the World, Report of Research Committee on Rolling Roll, p. 183, ISIJ, Tokyo, Japan (1995)
- Y.D. Lee, Y.Y. Lee, O.J. Kwon, G.S. Kim, and Y.G. Lee, Development of Rolling Technology of 430 Stainless Steel, Technical Report of POSCO Research Institute (1993)
- D. Suh, S. Oh, W. Jin, and S. Lee, J. of Korea Inst. of Met. & Mater. 35, 673 (1997)
- C.Y. Son, C.L. Kim, D.J. Ha, S. Lee, J.S. Lee, K.T. Kim, and Y.D. Lee, J. of Korea Inst. of Met. & Mater. 45, 6 (2007)
- W. Jin, J.Y. Choi, and Y.Y. Lee, ISIJ Int. 40, 789 (2000) https://doi.org/10.2355/isijinternational.40.789
- ASM Handbook, vol. 18, Friction, Lubrication, and Wear Technology
- J.E. Shingly and C.R. Mischke, Mechanical Engineering Design, p. 71, McGraw-Hill, New York, NY (1989)
- M. Hashimoto, H. Takigawa, and T. Kawakami, 37th MWSP Conf. Proc., p. 275, ISS, Warrendale, PA (1996)
- C.K. Kim, J.I. Park, S. Lee, and J.S. Yang, J. of Korea Inst. of Met. & Mater. 41, 288 (2003)
- C.K. Kim, J.I. Park, S. Lee, Y.C. Kim, N.J. Kim, and J.S. Yang, Metall. Mater. Trans. 36A, 87 (2005)
- W. Jin, J.Y. Choi, and Y.Y. Lee, ISIJ Int. 38, 739 (1998) https://doi.org/10.2355/isijinternational.38.739
- L.H.S. Luong and T. Heijkoop, Wear 71, 93 (1981) https://doi.org/10.1016/0043-1648(81)90142-3
- H.G. Jung, J.K. Ahn, and K.Y. Kim, J. of Korea Inst. of Met. & Mater. 39, 1032 (2001)
- J. Mougin, M. Dupeux, L. Antoni, and Alain Galerie, Mater. Sci. Eng. A359, 44 (2003)