Abstract
This paper describes sensor network system implementation for the IEEE 1451.2 standard which guarantees compatibilities between various wired sensors. The proposed system consists of the Network Capable Application Processor(NCAP) in the IEEE 1451.0, the Transducer Independent Interface(TII) in the IEEE 1451.2, the Transducer Electronic Data Sheet(TEDS) and sensors. The research goal of this study is to minimize and optimize system complexity for IC design. The NCAP is implemented using C language in personal computer environment. TII is used in the parallel port between PC and an FPGA application board. Transducer is implemented using Verilog on the FPGA application board. We verified the proposed system architecture based on the standards.
본 논문은 유선으로 연결된 다양한 센서들의 제어와 센서들 간의 호환성을 보장하는 IEEE 1451.2 표준을 적용한 센서 네트워크 시스템 구현에 대한 연구이다. 제안된 시스템은 IEEE 1451.0에서 기술된 네트워크 수용 가능한 응용 프로세서(NCAP-Network Capable Application Processor)와 IEEE 1451.2에서 기술된 변환기 독립 인터페이스(TII-Transducer Independent Interface), 변환기 전자 데이터 시트(TEDS-Transducer Electronic Data Sheet)와 아날로그 디지털 변환기를 포함한 송수신기 부분으로 구성된다. 본 시스템은 추후 반도체 집적회로 설계에 용이할 수 있돌고 시스템의 소형화와 최적화를 목표로 구현되었다. 네트워크 수용 가능한 응용 프로세서는 개인용 컴퓨터상에서 C언어로 구현하였고 변환기 독립 인터페이스는 개인용 컴퓨터의 병렬포트와 FPGA(Field-Programmable Gate Array) 응용보드의 확장포트를 이용하였고, 송수신기는 FPGA 응용보드를 이용하여 Verilog로 구현하였다. 표준에 근거한 실험을 수행하여 제안된 구조의 검증을 수행하였다.