참고문헌
- P. Popper, "The Preparation of Dense Self-bonded Silicon Carbide," pp. 207-19, Special Ceramics, Heywood, London, 1960
- J. N. Ness and T. F. Page, "Microstructural Characterization of Reaction- Bonded Silicon Carbide," J. Mater. Sci., 21 1377-97 (1986) https://doi.org/10.1007/BF00553278
- C. W. Forrest, P. Kenney, and J. V. Shennan, "The Fabrication and Properties of self Bonded Silicon Carbide Bodies," Academic Press, Inc Special Ceramics, 29 99-160 (1989)
-
C, B, Lim and T. Iseki, "Formation and Transportation of Intergranular and Modular Fine-Grained
$\beta$ -SiC in Reaction- Sintered SiC," Adv. Ceram. Mater., 3 [6] 590-94 (1988) https://doi.org/10.1111/j.1551-2916.1988.tb00284.x - H. C. Park, S. H. Park, and S. C. Choi, "A Study on Fabrication and Properties of Reaction-Bonded Silicon Carbide( 2): Microstructure and Mechanical Properties(in Korea)," J. Kor. Ceram. Soc., 33 [10] 1156-62 (1996)
- R. Naslain and F. Langlais, "Fundamental and Practical Aspects of the Chemical Vapor Infiltration of Porous Substrates," Carbon, 27 221-35 (1990)
- T. M. Besmann, B. W. Sheldon, R. A. Lowden, and D. P. Stinton, "Vapor-Phase Fabrication and Properties of Continuous- Filament Ceramic Composites," Science, 253 1104- 09 (1991) https://doi.org/10.1126/science.253.5024.1104
- R. Naslain, J. Lamon, R. Pailler, X. Bourrat, A. Guette, and F. Langlais, "Micro/Minicomposites: a Useful Approach to the Design and Development of Nonoxide CMCs," Compos., Part A 30 537-47 (1999) https://doi.org/10.1016/S1359-835X(98)00147-X
- K. Sato, A. Tezuka, O. Funayama, T. Issoda, Y. Terada, S. Kato, and M. Iwata, "Fabrication and Pressure Testing of a Gas-Turbine Component Manufactured by a Preceramic- Polymer-Impregnation Method," Compos. Sci. Tech., 59 853-59 (1999) https://doi.org/10.1016/S0266-3538(99)00015-9
-
R. Pampuch, J. Bialoskoreki, and E. Walask, "Mechanism of Reactions in the Si+
$C_f$ System and the Self-Propagation High Temperature Synthesis of Silicon Carbide," Ceram. Int., 13 63-8 (1987) https://doi.org/10.1016/0272-8842(87)90039-3 - S. M. Dong, Y. Katoh, A. Kohyama, S. T. Schwab, and L. L. Snead, "Microstructural Evolution and Mechanical Performances of SiC/SiC Composites by Polymer Impregnation/ Microwave Pyrolysis (PIMP) Process," Ceram. Int., 28 899-905 (2002) https://doi.org/10.1016/S0272-8842(02)00071-8
- A. Sayno, C. Sutoh, S. Suyama, Y. Itoh, and S. Nakagawa, "Development of a Reaction-Sintered Silicon Carbide Matrix Composite," J. Nucl. Mater., 271-272, 467-71 (1999) https://doi.org/10.1016/S0022-3115(98)00802-2
- S. P. Lee, Y. Katoh, T. Hinoki, M. Kotani, and A. Kohyama, "Microstructure and Bending Properties of SiC/SiC Composites Fabricated by Reaction Sintering Process," Ceram. Eng. Sci. Proc., 21 [4] 339-46 (2000)
- S. M. Dong, Y. Katoh, and A. Kohyama, "Processing Optimization and Mechanical Evaluation of Hot Press 2D Tyranno- SA/SiC Composites," J. Eur. Ceram. Soc., 23 1223-31 (2003) https://doi.org/10.1016/S0955-2219(02)00298-4
- S. M. Dong, Y. Katoh, and A. Kohyama, "Preparation.of SiC/SiC Composites by Hot Press, Using Tyranno-SA Fiber as Reinforcement," J. Am. Ceram. Soc., 86 [1] 26-32 (2003) https://doi.org/10.1111/j.1151-2916.2003.tb03272.x
- S. P. Lee, M. Imai, and T. Yano, "Fabrication and Mechanical Properties of Oriented SiC Short-Fiber-Reinforced SiC Composites by Tape Casting," Mater. Sci. Eng. A, 339 90- 5 (2003) https://doi.org/10.1016/S0921-5093(02)00100-4
- ASTM C20, "Standard Test Method for Apparent Porosity, Water Absorption, Apparent Specific Gravity and Bulk Density of Burned Refractory Brick and Shaped by Boiling Water," ASTM Inter., (2000)
- G. R. Antis, P. Chantikul, B. R. Lawn, and D. B. Marshall, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements," J. Am. Ceram. Soc., 64 [9] 533-43 (1981) https://doi.org/10.1111/j.1151-2916.1981.tb10320.x
피인용 문헌
- Diffusion of Si Vapor Infiltrating into Porous Graphite vol.49, pp.1, 2016, https://doi.org/10.5695/JKISE.2016.49.1.104