사출금형의 러너시스템 형상에 따른 균형 충전도

Degree of Filling Balance according to Runner Shapes in Injection Mold

  • 발행 : 2008.10.01

초록

Configuration of filling imbalance which is originated from imbalanced share rate of melt on runner is changed by runner layout, runner shape, material property, injection pressure, injection speed, melt temperature and mold temperature. In this paper, we conducted a study of runner layout and shape that are main factors of filling imbalance. Other factors such as the sharp corner effect and the groove corner effect are recently released were also considered. The results of study are showed that filling rate of between inside and outside cavity was influenced on shape of runner. Especially, this study suggests a new runner system for filling balance by adapting the two effects of unary branch type runner at multi cavity mold and theoretical investigated flow in the sharp corner type runner.

키워드

참고문헌

  1. Jeong, Y. D., Park, T.W. and Kong, H. P., "Easy mold design for plastic injection molding," INTERVISION, pp. 224-227, 2003
  2. Young, J. H. and Beaumont, J. P., "Mold Filling Imbalances in Geometrically Balanced Runner System," Journal of Injection Molding Technology, Vol. 1, No. 3, pp. 133-143, 1997
  3. Beamont, J. P., Young, J. H. and Jawoski, M.J., "Solving Mold Filling Imbalance in Multi-Cavity Injection Molds," Journal of Injection Molding Technology, Vol. 2, No. 2, pp. 47-58, 1998
  4. Beamont, A. I., "Investigation of Reversed Shear Induced Melt Imbalances in Injection Molds," ANTEC, pp. 1112-1116, 2007
  5. McKee, R. W. and Hoover, J.A., "The Effect of Sharp Corners and Runner Length on Melt Flow Imbalances," ANTEC, pp. 2868-2872, 2006
  6. Je, D. K., "A Study on the Filling Imbalance in Multi-Cavity Injection Molds," Department of Mechanical Engineering Graduate School of Pukyong National University, pp. 40-50, 2006
  7. Kang, C. M. and Jeong, Y. D., "Effects of Glass Fiber on the Filling imbalance in Multi-Cavity Injection Mold," Spring conference KSME, pp. 120-123, 2004
  8. Auell, P. and Bailey, M., "Effect Thermoplastic Material Properties on Mold Filling Imbalances," ANTEC, pp. 3495-3499, 2002
  9. Beaumont, J. P., Nagel, R. and Sherman, R., "Successful Injection Molding," HANSER, pp. 36-37, 2002
  10. Han, S. R., Kang, C. M., Han, K. T. and Jeong, Y. D., "A Study on the Filling Imbalances between Multi-Cavity in Hot-Runner Mold," Journal of the Korean Society of Precision Engineering, Vol. 22, No. 9, pp. 174-175, 2005
  11. Je, D. K. and Jeong, Y. D., "Filling Imbalance in 3Plate Type Injection Molds with Multi-Cavity," Spring conference KSPE, pp. 300-301, 2000
  12. Han, D. Y., Kwon, Y. S., No, B. S. and Jeong, Y. D., "Filling Imbalance of Elastomer TPVs in Injection Mold with Multi-Cavity," Journal of the Korean Society of Precision Engineering, Vol. 24, No. 2, pp. 41-43, 2007