Evaluation of Structural Stability of a Simple-typed Cultivation Facility for Growing Pleurotus ostreatus

간이 느타리재배사의 구조 안전성 평가

  • Published : 2008.09.30

Abstract

The structural stability of a simple-typed cultivation facility with a width of 5.6 m for growing Pleurotus ostreatus was analyzed by modeling the facility as three-dimensional steel frames. The computation was done by using the finite element analysis program, ANSYS and the criterion of determining structural stability was based on the allowable stress design (ASD). The computational results showed that the structure with a straight-typed bed column was more stable than those with other types of bed columns against snow depth but there was little difference against wind velocity. As results, the interval of rafter had a more influence on safety wind velocity than that of bed column, while the interval of bed column was more important to safety snow depth. Finally the bed column against buckling was stable in all cases considered in this paper.

유한요소해석 코드인 ANSYS를 이용, 폭 5.6m간이 느타리재배사를 3차원 강뼈대 구조물로 모델링하여 베드기둥 형태 및 파이프 규격에 따른 구조적 안전성을 분석하였으며 허용응력 설계법에 기초해 구조안전 여부를 판단하였다. 전산구조 해석 결과, 베드기둥에 따른 구조적 안전성은 안전적설심의 경우, 직립형 베드기둥 구조가 다른 베드기둥 형태보다 훨씬 높게 나타났으나 안전풍속 측면에서는 형태별 차이가 없는 것으로 나타났다. 서까래 규격과 베드기둥 설치 간격에 따른 구조적 안전성은 본 연구에서 고려한 파이프 규격 범위에 있어서 안전풍속 측면의 경우, 베드기둥 설치간격보다 시설 외부적 요소인 서까래 간격에 더 영향을 받는 것으로 나타났으나 안전적설심 측면에서는 안전 풍속과는 반대로 서까래 간격보다는 시설 내부적 구조물인 베드기둥 간격이 더 중요한 것으로 나타났다. 베드기둥의 좌굴에 대한 안전성은 해석의 모든 경우에서 안전한 것으로 나타났다.

Keywords

References

  1. American Institute of Steel Construction, Inc. 1980. Manual of steel construction, 8th Ed. 400 North Michigan Avenue, Chicago, Illinois 60611
  2. Architectural Institute of Korea. 2006. Korean building code and commentary (in Korean)
  3. James M. Gere and Stephen P. Timoshenko. 1988. Mechanics of Materials, 2nd Ed. p. 519-528
  4. Lee, S.K. et al. 1995. Greenhouse Structural Requirements, Rural Development Corporation of Korea (in Korean)
  5. Ministry of Agriculture and Forestry. 2007. Statistics of Agriculture and Forestry (in Korean)
  6. Suh, W.M. and Y.C. Yoon. 2005. Data Analysis for Structural Design of Pleurotus eryngii Cultivation Facilities. J. of KSAE. 47(3):29-37 (in Korean) https://doi.org/10.5389/KSAE.2005.47.3.029
  7. Suh, W.M. and Y.C. Yoon. 2004. An Analysis on Thermal Insulation Effect of Farm Structures Coated with Surface Treatment. J. of KSAE. 46(4):39-46 (in Korean) https://doi.org/10.5389/KSAE.2004.46.4.039
  8. Yang, Y.S. and K.S. Kim. 1988. A Study on the Buckling Strength of Welded H-Columns Manufactured from High Strength Steel Plates. J. of AIK. 4(6):225-235 (in Korean)
  9. Yoon, Y.C., W.M. Suh, and C. Yu. 2004. Analysis of Actual State of Facilities for Pleurotus eryngii. J. Bio-Enviro. Con. 13(4):217-225 (in Korean)
  10. Yoon, Y.C., W.M. Suh, and H.W. Lee. 2003. Analysis of Environment Factors in Pleurotus eryngii Cultivation House. J. Bio-Enviro. Con. 12(4):200-206 (in Korean)
  11. Yoon, Y.C., W.M. Suh, and I.B. Lee. 2005. Analysis of Environmental Design Data for Growing Pleurotus eryngii. J. Bio-Enviro. Con. 14(2):95-105 (in Korean)
  12. Yum, S.H., K.J. Kwon, S.H. Sung, and Y.D. Choi. 2007a. The Installation Effect and Optimal Pipe Sizes of an Anti-Wind Net by Computational Analysis. J. Biosystems Eng. 32(6):430-439 (in Korean) https://doi.org/10.5307/JBE.2007.32.6.430
  13. Yum, S.H., N.K. Yun, K.W. Kim, S.H. Lee, Y.H. Cho, S.J. Park, and M.K. Park. 2007b. The Optimum Specification of Pipes in Rain-Sheltering Greenhouse with Roof Vents for Large-Grain Grapevine Cultivation. J. Bio-Enviro. Con. 16(4):275-283 (in Korean)