International Journal of Air-Conditioning and Refrigeration

The Society of Air-Conditioning and Refrigerating Engineers of Korea (대한설비공학회)
권호 표지

Airside Performance of Convex Louver Fin-and-Tube Heat Exchangers

  • Kim, Nae-Hyun (Department of Mechanical Engineering, University of Incheon) ;
  • Oh, Wang-Kyu (Graduate School, University of Incheon)
  • Published : 2008.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The heat transfer and friction characteristics of heat exchangers having convex louver fins are experimentally investigated, and the results are compared with those of wave fin counterparts. Eighteen samples (nine convex louver fin samples and nine wave fin samples) which had different fm pitches (1.81 mm to 2.54 mm) and tube rows (one to four) were tested. The convex angle was $11.7^{\circ}$. The j factors are insensitive to fin pitch, while f factors increase as fin pitch increases. The effect of fin pitch on f factor is more significant for the wave fin compared with the convex louver fin. It appears that the complex fin pattern of the convex louver fin induces intense mixing of the flow, and thus reduces the effect of fin pitch. Both the j and f factors decrease as the number of tube row increases. However, as the Reynolds number increases, the effect of tube row diminishes. Comparison of the convex louver fin j factors with those of wave fin reveals that convex louver fin j factors are 18% to 29% higher than those of wave fin. The f factors are 16% to 34% higher for the convex louver fin. The difference increases as fin pitch decreases. Existing correlation fails to adequately predict the present data. More data is needed for a general correlation of the convex louver fin geometry.

Keywords

References

  1. Webb, R. L. and Kim, N.-H., 2005, Principles of enhanced heat transfer, Taylor and Francis Pub
  2. Wang, C. C., 1999, On the Airside Performance of Fin-and-Tube Heat Exchangers, in Heat Transfer Enhancement of Heat Exchangers, S. Kakac et al. Kluwer Academic Press, pp. 141-162
  3. Wang, C. C., Fu, W. L. and Chang, C. T., 1997, Heat Transfer and Friction Characteristics of Typical Wavy Fin-and-Tube Heat Exchangers, Exp. Thermal Fluid Science, Vol. 14, pp. 174-186 https://doi.org/10.1016/S0894-1777(96)00056-8
  4. Wang, C. C., Lin, Y. T., Lee, C. J. and Chang, Y. J., 1999, Investigation of Wavy Fin-and-Tube Heat Exchangers: A Contribution to Databank, Experimental Heat Transfer, Vol. 12, pp. 73-89
  5. Wang, C. C., Chang, Y. J., and Chiou, N. F., 1999, Effects of Waffle Height on the Airside Performance of Wavy Fin-and-Tube Heat Exchangers, Heat Transfer Engineering, Vol. 20, No. 3, pp. 45-56
  6. Saiz Jabardo, J. M., Bastos Zoghbi Filho, J. R. and Salamanca, A., 2006, Experimental Study of the Airside Performance of Louver and Wave Fin-and- Tube Coils, Exp. Thermal Fluid Science, Vol. 30, pp. 621-631 https://doi.org/10.1016/j.expthermflusci.2006.01.001
  7. Wongwises, S. and Chokeman, Y., 2004, Effect of Fin Thickness on Airside Performance of Herringbone Wavy Fin-and-Tube Heat Exchangers, Heat Mass Transfer, Vol. 41, pp. 147-154
  8. Chokeman, Y. and Wongwises, S., 2005, Effect of Fin Pattern on the Airside Performance of Herringbone Wavy Fin-and-Tube Heat Exchangers, Heat Mass Transfer, Vol. 41, pp. 642-650 https://doi.org/10.1007/s00231-004-0578-5
  9. Chang, W. R., Wang, C. C., Tsai, W. C. and Shyu, R. J., 1995, Airside Performance of Louver Fin Heat Exchangers, Proceedings of the 4th ASME/JSME Thermal Engineering Joint Conference, Vol. 4, pp. 367-372
  10. Bae, J. H., Park, M. H. and Lee, J. H., 1999, Local Flow and Heat Transfer of a 2-Row Offset Strip Fin-Tube Heat Exchanger, J. Enhanced Heat Transfer, Vol. 6, pp. 13-29 https://doi.org/10.1615/JEnhHeatTransf.v6.i1.20
  11. Wang, C. C., Chang, Y. P., Chi, K. Y. and Chang, Y. J., 1998, An Experimental Study of Heat Transfer and Friction Characteristics of Typical Louver Fin and Tube Heat Exchangers, Int. J. Heat Mass Transfer, Vol. 41, pp. 817-822 https://doi.org/10.1016/S0017-9310(97)00154-3
  12. Hatada, T., Ueda, U., Oouchi, T. and Shimizu, T., 1989, Improved Heat Transfer Performance of Air Coolers by Strip Fins Controlling Air Flow Distribution, ASHRAE Trans., Vol. 95, Pt. 2, pp. 166-170
  13. Wang, C. C., Chen, P. Y. and Jang, J. Y., 1996, Heat Transfer and Friction Characteristics of Convex-Louver Fin-and-Tube Heat Exchangers, Experimental Heat Transfer, Vol. 9, pp. 61-78 https://doi.org/10.1080/08916159608946514
  14. Wang, C. C., Tsai, Y. M., and Lu, D. C., 1998, Comprehensive Study of Convex Louver and Wavy Fin-and-Tube Heat Exchangers, J. Thermophysics Heat Transfer, Vol. 12, No. 3, pp. 423-430 https://doi.org/10.2514/2.6354
  15. ASHRAE Standard 41.1, 1986, Standard Method for Temperature Measurement
  16. ASHRAE Standard 41.2, 1987, Standard Method for Laboratory Air-Flow Measurement
  17. ASHRAE Standard 41.5, 1975, Standard Measurement Guide, Engineering Analysis of Experimental Data
  18. Taborek, J., 1998, F and ${\theta}$ Charts for Cross-Flow Arrangements, in Heat Exchanger Design Handbook, G. F. Hewitt, Section 1.5.3, Begell House Inc
  19. Gnielinski, V., 1976, New Equation for Heat and Mass Transfer in Turbulent Pipe and Channel Flow, Int. Chem. Eng., Vol. 16, pp. 359-368
  20. Schmidt, T. E., 1949, Heat Transfer Calculations for Extended Surfaces, J of ASRE, Refrigeration Engineering, Vol. 4, pp. 351-357
  21. Wang, C. C., Webb, R. L. and Chi, K. Y., 2000, Data Reduction for Airside Performance of Finand- Tube Heat Exchangers, Experimental Thermal Fluid Science, Vol. 21, pp. 218-226 https://doi.org/10.1016/S0894-1777(00)00005-4
  22. Rich, D. G., 1973, The Effect of Fin Spacing on the Heat Transfer and Friction Performance of Multi-Row, Plate Fin-and-Tube Heat Exchangers, ASHRAE Trans., Vol. 79, Pt. 2, pp. 137-145
  23. Rich, D. G., 1975, The Effect of the Number of Tube Rows on Heat Transfer Performance of Smooth Plate Fin-and-Tube Heat Exchangers, ASHRAE Trans., Vol. 81, Pt. 1, pp. 307-317
  24. Torikoshi, K., Xi., G. N., Nakazawa, Y. and Asano, H., 1994, Flow and Heat Transfer Performance of a Plate Fin and Tube Heat Exchanger (First Report: Effect of Fin Pitch), Heat Transfer 1994, Proceedings of the 10th Int. Heat Transfer Conf., Vol. 4, pp. 411-416
  25. Jang, J.-Y. and Chen, L.-K., 1997, Numerical Analysis of Heat Transfer and Fluid Flow in a Three-Dimensional Wavy Fin-and-Tube Heat Exchanger, Int. J. Heat Mass Transfer, Vol. 40, No. 16, pp. 3981-3990 https://doi.org/10.1016/S0017-9310(97)00047-1
  26. Min, C.-K., Cho, J.-P., Oh, W.-K. and Kim, N.-H., 2004, Heat Transfer and Pressure Drop Characteristics of Heat Exchangers Having Plain Fins Under Dry and Wet Conditions, Korean J. Air-Conditioning and Refrigeration, Vol. 16, No. 3, pp. 218-229