참고문헌
- Saumweber, C., Schulz, A. and Wittig, S., 2003, "Free-Stream Turbulence Effects on Film Cooling With Shaped Holes," Journal of Turbomachinery, Vol. 125, pp. 65-73 https://doi.org/10.1115/1.1515336
- Walters, D. K. and Leylek, J. H., 2000, "A Detailed Analysis of Film-Cooling Physics : Part 1-Streamwise Injection with Cylidrical Holes," Journal of Turbomachinery, Vol. 122, pp.102-112 https://doi.org/10.1115/1.555433
- Hale, C. A., Plesniak, M. W. and Ramadhyani, S., 2000, "Film Cooling Effectiveness for Shore Film Cooling Holes Fed by a Narrow Plenum," Journal of Turbomachinery, Vol. 122, pp. 553-557 https://doi.org/10.1115/1.1303705
- Lutum, E. and Johnson, B. V., 1999, "Influence of the Hole Length-to-Diameter Ratio on Film Cooling With Cylindrical Holes," Journal of Turbomachinery, Vol. 121, pp. 209-216 https://doi.org/10.1115/1.2841303
- Burd, S. W., Kaszeta, R. W. and Simon, T. W., 1998, "Measurements in Film Cooling Flows: Hole L/D and Turbulence Intensity Effects," Journal of Turbomachinery, Vol. 120, pp. 791-798 https://doi.org/10.1115/1.2841791
- Yuen, C. H. N. and Martinez-Botas, R. F., 2003, "Film cooling characteristics of a single round hole at various streamwise angles in a crossflow: Part 1 effectiveness," International Journal of Heat and Mass Transfer, Vol. 46, pp. 221-235 https://doi.org/10.1016/S0017-9310(02)00274-0
- Rhee, D. H., Kim, B.G. and Cho, H. H., 1998, "Characteristics of Heat/Mass Transfer and Film Cooling Effectiveness Around a Single Film Cooling Hole with Compound Injection Angles," Trans. of KSME (B), Vol. 22, No. 10, pp. 1433-1444
- Mahmood. S., Kassab, A. J. and Divo, E., 2005, “Film Cooling Effectiveness From a Single Scaled-up Fan-Shaped Hole a CFD Simulation of Adiabatic and Conjugate Heat Transfer Models,” IGTI Turbo Expo, Nevada, Paper GT2005-68431
- Queipo, N. V, Haftka, R. T., Shyy, W., Goel, T., Vaidyanathan, R. and Tucker, P. K., 2005, "Surrogate-based analysis and optimization," Progress in Aerospace Science, Vol. 41, pp. 1-28 https://doi.org/10.1016/j.paerosci.2005.02.001
- Li, W. and Padula, S., 2004, "Approximation Methods for Conceptual Design of Complex Systems," Eleventh International Conference on Approximation Theory(eds. Chui, C., Neaumtu, M., Schumaker, L.), Tennessee, USA
- Samad, A., Shin, D. Y., Kim, K. Y., Goel, T. and Haftka, R. T., 2007, "Surrogate Modeling for Optimization of a Dimpled Channel to Enhance Heat Transfer Performance," Journal of Thermophysics and Heat Transfer, Vol. 21, No. 3, pp. 667-670 https://doi.org/10.2514/1.30211
- Samad, A., Kim, K. Y., Goel, T., Haftka, R. T. and Shyy, W., 2008, "Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization," AIAA Journal of Propulsion and Power, Vol. 24, No. 2, pp. 302-310 https://doi.org/10.2514/1.28999
- M. J. L. Orr, Introduction to radial basis neural networks, Center for cognitive science, Edinburgh University, Scotland, UK. http://anc.ed.ac.uk/rbf/
- CFX-11.0 Solver Theory, Ansys inc., 2006
- Menter, F. and Esch, T., 2001, "Elements of Industrial Heat Transfer Prediction," 16th Bazilian Congress of Mechanical Engineering(COBEM), Uberlandia, Brazil
- Bardina, J. E., Huang, P. G. and Coakley, T., 1997, "Turbulence Modeling Validation," Fluid Dynamics Conference 28th, AIAA-1997-2121, AIAA Paper 97-2121
- MATLAB, The language of technical computing, Release 14, The Math Works Inc.
- JMP 5.1, 2004, SAS Institute, Inc.
- Lee, S. W., Lee, J. S. and Ro, S. T., 1994, "Experimental Study on the Flow Characteristics of Streamwise Inclined Jets in Crossflow on Flat Plate," Journal of Turbomachinery, Vol.116, pp. 97-105 https://doi.org/10.1115/1.2928283
- Haven, B. A. and Kurosaka, M., 1997, "Kidnry and anti-kidney vortices in crossflow jets," J. Fluid Mech., Vol. 352, pp. 27-64 https://doi.org/10.1017/S0022112097007271
피인용 문헌
- A Study on the Model of Thermal Plume Flow in the Forest Fire vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.007
- vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.070
- Effects of Compound Angle, Diffuser Angle, and Hole Pitch on Film-cooling Effectiveness vol.35, pp.9, 2011, https://doi.org/10.3795/KSME-B.2011.35.9.903