Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지
DOI QR코드

DOI QR Code

Seismic Evaluation of Steel Moment Frame Buildings based on Different Response Modification Factors and Fundamental Periods

반응수정계수와 주기의 영향에 대한 철골모멘트저항골조 건물의 내진성능평가

  • 신지욱 (세종대학교 건축공학과) ;
  • 이기학 (세종대학교 건축공학과) ;
  • 이도형 (배재대학교 건설환경철도공학과)
  • Published : 2008.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study was performed to evaluate the effect of Response modification factors (R-factor) in 3-, 9- and 20- story steel Moment Resisting Frame (MRF) buildings. Each structure was designed using a R-factor of 8, as tabulated in the 2000 International Building Code provision (IBC 2000) and Korea Building Code (KBC) 2008. In order to evaluate the maximum and minimum performance expected for such structures, an upper bound and lower bound design were adopted for each model. Next, each analytical model was designed using different R-factors (8, 9, 10, 11, 12) and four different structural periods with the original fundamental period. For a detailed case study, a total of 150 analytical models were subjected to 20 ground motions representing a hazard level with a 2% probability of being exceeded in 50 years. In order to evaluate the performance of the structures, static push-over and non-linear time history analysis (NTHA) were performed, and displacement ductility demand was investigated to consider the ductility capacity of the structures. The results show that the dynamic behaviors for the 3- and 9-story buildings are relatively stable and conservative, while the 20-story buildings show a large displacement ductility demand due to dynamic instability factors. (e.g. P-delta effect and high mode effect)

본 연구는 높은 지진의 위험이 내재된 지역에 위치한 3층, 9층 그리고 20층 철골 모멘트저항골조에 대한 반응수정계수와 주기의 영향을 평가하기 위한 것이다. 각 구조물들은 IBC 2000과 KBC 2005에서 제시하고 있는 8의 반응수정계수로 설계되었고 건물에 기대되는 최소의 성능과 최대의 성능을 평가하기 위해서 상한범위와 하한범위의 설계가 고려되었다. 또한 반응수정계수에 대한 영향을 조사하기 위하여 4개의 다른 반응수정계수들이(9, 10, 11, 12) 각 구조물에 대하여 적용되었고 각 구조물의 고유주기 값 외의 4개의 다른 주기를 추가로 적용하여 구조물의 동적거동시 주기에 대한 영향을 조사하였다. 총 150개의 해석모델들은 50년 동안 2%의 초과확률(재현 주기 2500년)을 가진 20개의 지반운동에 대하여 평가되었다. 구조물의 성능평가를 위하여 정적 Pushover와 비선형 시간이력해석이 수행되었으며 구조물의 연성능력을 평가하기 위해서 변위연성요구가 고려되었다. 3층과 9층 구조물은 변위연성요구 값이 비교적 안정적인 거동을 보인 반면 20층 구조물은 동적 불안정성을 야기하는 요소에 의해 민감하게 나타나는 것으로 조사되었다.

Keywords

References

  1. ATC, Tentative recommendations for the development of seismic regulations for buildings, ATC 3-06 Report, Applied Technology Council, Redwood City, CA, 1978
  2. Miranda, E. and Bertero, V. V., "Evaluation of strength reduction factors for earthquake-resistant design." Earthquake Spectra, EERI, Vol. 10, No. 2, 1994, pp. 357-379 https://doi.org/10.1193/1.1585778
  3. Newmark, N. M. and Hall, W. J., Earthquake Spectra and Design, EERI Monograph Series, EERI, Oakland, CA, 1982
  4. ATC, A critical review of current approaches to earthquakeresistant design, ATC-34, Applied Technology Council, Redwood City, CA, 1995
  5. Korean Building Code (Structural)., 대한건축학회, 2005
  6. International Building Code (2000)., International Code Council, Falls Church, VA, 2000
  7. Lee, K. and Foutch, D. A., "Performance evaluation of new steel frame buildings for seismic load," Earthquake Eng. Struct. Dyn., Vol. 31, No. 3, 2002, pp. 653-670 https://doi.org/10.1002/eqe.147
  8. Somerville, P., Smith, N, Puntamurthula, S., and Sun, J., Development of ground motion time histories for phase 2 of the FEMA/SAC steel project, SAC Background Document SAC/BD-97/04, SAC Joint Venture, Richmond, CA, 1997
  9. Prakash, V., Powell, G. H., and Campbell, S, Drain-2DX, Element description and user guide. Univ. of California, Berkeley, CA, 1993
  10. Shi, S. and Foutch, D. A., Connection element (type 10) for Drain-2DX, Civil Eng. Report, Univ. of Illinois at Urbana-Champaign, IL, 1997
  11. Lee, K. and Foutch, D. A., "Performance evaluation of damaged steel frame buildings subjected to seismic load." ASCE J. of Structural Engr. Vol. 43, No.4. April 2004
  12. Venti, M and Engelhardt M. D., Brief report of steel moment conn. test, secimen DBBW (Dog bone - bolted web)., SAC Background Document SAC/BD-99/26, SAC Joint Venture, Richmond, CA, 1997
  13. Vamvatsikos, D. and Cornell, C. A., "Incremental Dynamic Analysis." J. of Earthquake Engr. and Structural Dynamics, Vol. 31, No. 3, 2002, pp. 491-514 https://doi.org/10.1002/eqe.141
  14. Lee, K. and Foutch, D. A., "Seismic Evaluation of Steel Moment Frame Buildings Designed Using Different R values," J. Struct. Eng. (ASCE), Vol. 132, No. 9, 2006 https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(2006)
  15. Kestuzei, P., Belmouden, Y., and Trueb, M., "Non-linear seismic behavior of structures with limited hysteretic energy dissipation capacity," Bull Earthquake Eng. No. 5, 2007, pp. 549-569
  16. Shi, S. and Foutch, D. A., "Effects of hysteresis type on the seismic response of buildings," 6th U.S. National Conference on Earthquake Engineering, 1997