References
- J. Larminie and A. Diks, "Fuel cell system explained, 2nd ed," JOHN WILEY & SONS, LTD
- R. K. Ahluwalia and X. Wang, "Fuel cell systems for transportation: Status and trends," Journal of Power Source, vol. 177, pp. 167-176, 2008 https://doi.org/10.1016/j.jpowsour.2007.10.026
- L. A. Riascos, M. G. Simoes, and P. E. Miyagi, "Online fault diagnostic system for proton exchange membrane fuel cells," Journal of Power Source, vol. 175, pp. 419-429, 2008 https://doi.org/10.1016/j.jpowsour.2007.09.010
- J. Stumper and C. Stone, "Recent advances in fuel cell technology at Ballard," Journal of Power Source, vol. 176, pp. 468-476, 2008 https://doi.org/10.1016/j.jpowsour.2007.08.071
- G. Y. Choe, J. S. Kim, H. S. Kang, B. K. Lee, and W. Y. Lee, "PEMFC modeling for high efficiency fuel cell BOP," ICEMS, 2007
- D. K. Choi, B. K. Lee, S. W. Choi, C. Y. Won, and D. W. Yoo, "A novel power conversion circuit for costeffective battery-fuel cell hybrid systems," Journal of Power Source, vol. 152, pp. 245-255, 2005 https://doi.org/10.1016/j.jpowsour.2005.01.050
- T. W. Lee, J. Hur, B. K. Lee, and C. Y. Won, "Design of a fuel cell generation system using a PEMFC simulator," Electric Power Systems Research, vol. 77, pp. 1257-1264, 2007 https://doi.org/10.1016/j.epsr.2006.09.019
- H. S. Chu, F. Tsau, Y. Y. Yan, K. L. Hsueh, and F. L. Chen, "The development of a small PEMFC combined heat and power system," Journal of Power Source, vol. 176, pp. 499-514, 2008 https://doi.org/10.1016/j.jpowsour.2007.08.072
- A. R. Miller, K. S. Hess, D. L. Barnes, and T. L. Erickson, "System design of a large fuel cell hybrid locomotive," Journal of Power Source, vol. 176, pp. 499-514, 2008 https://doi.org/10.1016/j.jpowsour.2007.08.072
- M. Mohr and F. W. Fuchs, "Voltage fed current fed full bridge converter for the use in three phase grid connected fuel cell systems," IPEMC, vol. 1, 2006, pp.1-7
- X. Kong and A. M. Khambadkone, "Analysis and implementation of a high efficiency, interleaved current-fed full bridge converter for fuel cell system," PEDS, vol. 1, 2005, pp. 474-479
- J. G. Cho, J. W. Baek, C. Y. Jeong, G. H. Rim, "Novel zero-voltage and zero-current-switching fullbridge pwm converter using a simple auxiliary circuit," IEEE Trans. on IA, vol. 35, no. 1, pp. 15-20, Jan/Feb. 1999
- M. Ilic and D. Maksimovic, "Phase-shifted full bridge dc-dc converter with energy recovery clamp and reduced circulating current," APEC, 2007, pp. 969-975
- X. Jiang, X. Wen, and H. Xu, "Study on isolated boost full bridge converter in FCEV," IPEC, vol.2, 2005, pp. 827-830
-
Ballard
$Nexa^{\circledR}$ Power module user's manual - L. Zhu, K. Wang, F.C. Lee, and J. Lai, "New start-up schemes for isolated full-bridge boost converters," IEEE Trans. on PE, vol. 18, no. 4, pp. 946-951, 2003
Cited by
- Effects of the Sintering Temperature on the Properties of Ce0.85Gd0.1Ca0.05O2- δ Electrolyte Materials for SOFC vol.140, pp.1, 2012, https://doi.org/10.1080/10584587.2012.741453
- Optical detection of volatile organic compounds using selective tensile effects of a polymer-coated fiber Bragg grating vol.18, pp.24, 2010, https://doi.org/10.1364/OE.18.024753
- Electrical and structural properties of Ce0.8(Sm0.5−xY0.5Alx)0.2O2−δ ceramics as an electrolyte for SOFC vol.58, 2014, https://doi.org/10.1016/j.materresbull.2014.05.011
- Fiber-optic hydrogen sensor based on polarization-diversity loop interferometer vol.62, pp.4, 2013, https://doi.org/10.3938/jkps.62.575