Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Temperature Dependent Damage Model for Evaluating Material Performance under Cryogenic Environment

극저온 재료 성능분석을 위한 온도의존 손상모델 개발

  • Lee, Kyoung-Joon (Dept. of Naval Architecture and Ocean Engineering, Pusan Naval University) ;
  • Kim, Tae-Woo (Dept. of Naval Architecture and Ocean Engineering, Pusan Naval University) ;
  • Yoo, Jea-Sin (Dept. of Naval Architecture and Ocean Engineering, Pusan Naval University) ;
  • Yoo, Seong-Won (Dept. of Naval Architecture and Ocean Engineering, Pusan Naval University) ;
  • Chun, Min-Sung (Samsung Heavy Industries co., ltd.) ;
  • Lee, Jae-Myung (Dept. of Naval Architecture and Ocean Engineering, Pusan Naval University)
  • 이경준 (부산대학교 조선해양공학과) ;
  • 김태우 (부산대학교 조선해양공학과) ;
  • 유재신 (부산대학교 조선해양공학과) ;
  • 유성원 (부산대학교 조선해양공학과) ;
  • 전민성 (삼성중공업(주)) ;
  • 이제명 (부산대학교 조선해양공학과)
  • Published : 2008.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the constitutive equation is developed to analyze the characteristics of strain-induced plasticity in the range of low temperature of 316 stainless steel. The practical usefulness of the developed equations is evaluated by the comparison between experimental and numerical results. For 316 stainless steel, constitutive equations, which represent the characteristics of nonlinear material behavior under the cryogenic temperature environment, are developed using the Bodner's plasticity model. In order to predict the material behaviour such as damage accumulation, Bodner-Chan's damage model is implemented to the developed constitutive equations. Based on the developed constitutive equations, 3-D finite element analysis program is developed, and verified using experimental results.

Keywords

References

  1. Bodner, S.R. and Chan, K.S., 1986, "Modeling of Continuum Damage for Application in Elastic-viscoplastic Constitutive Equations," Engineering Fracture Mechanics, Vol. 25, pp. 705-712 https://doi.org/10.1016/0013-7944(86)90034-2
  2. Bodner, S.R., 2002, Unified Plasicity for Engineering Applications, New York, Kluwer Academic
  3. Cedric, G., Blazej, S. and Stefano, S., 2006, "Constitutive Modelling and Identification of Parameters of the Plastic Strain-induced Martensitic Transformation in 316L Stainless Steel at Cryogenic Temperatures," International Journal of Plasticity, Vol. 22, pp. 1234-1264 https://doi.org/10.1016/j.ijplas.2005.08.002
  4. Han, D.S., Cho, D.S., Kim, J.H., Lee, T.K., Rim, C.H. and Lee, J.M., 2007, "A Study of Strength of Damaged Ship Structures Using Damage Simulator," Journal of the Society of Naval Architects of Korea, Vol. 44, No. 4, pp. 439-444 https://doi.org/10.3744/SNAK.2007.44.4.439
  5. Hayhurst, D.R. and Leckie, F.A., 1977, "Constitutive Equation for Creep Damage," Acta Metallurgica, Vol. 25, pp. 1059-1070 https://doi.org/10.1016/0001-6160(77)90135-3
  6. Kim, J.K., Kim, C.S., Cho, D.H., Kim, D.S. and Yoon, I.S., 2000, "Low Temperature Effects on the Strength and Fracture toughness of Membrane Material for LNG Storage Tank," Journal of the Korean Society of Mechanical Engineers, Vol. A, Vol. 24, No. 3, pp. 710-717
  7. Kim, H.S., 2001, "The Evaluation of Mechanical Properties and Fatigue Life for Domestic 304 Stainless Steel Used as Membrane Material in LNG Storage Tank," Journal of the Korean Society of Mechanical Engineers, Vol. A, Vol. 25, No. 10, pp. 1644-1650
  8. Krieg, R.D., Swearengen, J.C. and Rohde, R.W., 1978, "A Physically-Based Internal Variable Model for Rate-Dependent Plasticity," American Society of Mechanical Engineers, pp. 15-28
  9. Lee, J.M., 1996, A Study of Computational Mechanics of Thermal Damage Problems for Structural Members, Ph.D Dissertation, University of Tokyo
  10. Lee, J.H., Kim, T.W., Kim, M.H., Kim, H.S., Noh, B.J., Choe, I.H. and Lee, J.M., 2007a, "Numerical Assessment of Dynamic Strength of Membrane Type LNG Carrier Insulation System," Journal of the Society of Naval Architects of Korea, Vol. 44, No. 3, pp. 305-313 https://doi.org/10.3744/SNAK.2007.44.3.305
  11. Lee, J.H., Choi, W.C., Kim, M.H., Kim, H.S., Noh, B.J., Choe, I.H. and Lee, J.M., 2007b, "Experimental Assessment of Dynamic Strength of Membrane Type LNG Carrier Insulation System," Journal of the Society of Naval Architects of Korea, Vol. 44, No. 3, pp. 296-304 https://doi.org/10.3744/SNAK.2007.44.3.296
  12. Makkouk, R., Bourgeois, N., Serri, J., Bolle, M., Martiny. M., Teaca, M. and Ferron, G., 2008, "Experimental and Theoretical Analysis of The Limits to Ductility of Type 304 Stainless Steel Sheet," Engineering Journal of Mechanics A/Solids, Vol. 27, pp. 181-194 https://doi.org/10.1016/j.euromechsol.2007.04.004
  13. Miller, A,K. and Tanake, T.G., 1988, "A New Method for Integrating Unified Constitutive Equations Under Complex Histories," Journal of Engineering Materials and Technology, Vol. 110, No. 3, pp. 205-211 https://doi.org/10.1115/1.3226038
  14. Nho, I.S., 2000, "Finite Element Analysis of Elasto-Plastic Large Deformation considering the Isotropic Damage(the 1st Report)-Development of Elasto-Plastic Damage Constitutive Model-," The Korean Society of Ocean Engineers, Vol. 14, No. 2, pp. 70-75
  15. Saburo, U. and Takanobu, M., 2000, "Creep Deformation of Austenitic Steels at Medium and Low Temperatures," Cryogenics, Vol. 40, pp. 117-126 https://doi.org/10.1016/S0011-2275(00)00016-3
  16. Toy, Y. and Lee, J.M., 2002, "Thermal Elasto-Viscoplastic Damage Behavior of Structural Members in Hot-Dip Galvaniz ation," International Journal of Damage Mechanics, Vol. 11, pp. 171-185 https://doi.org/10.1106/105678902023083
  17. Walker, K.P., 1987, "A Uniformly Valid Asymptotic Integration Algorithm for Unified Viscoplastic Constitutive Models," American Society of Mechanical Engineers, pp. 13-27

Cited by

  1. A Comparative Study on Mechanical Behavior of Low Temperature Application Materials for Ships and Offshore Structures vol.48, pp.3, 2011, https://doi.org/10.3744/SNAK.2011.48.3.189