References
- B. P. Pal "Fabrication and Modeling of Fused Biconical Tapered Fiber Couplers", Fiber and integrated optics, vol. 22, no. 2, pp. 97-117, 2003 https://doi.org/10.1080/01468030390111922
- B. E. Olsson and P. A. Andrekson, "A simple method for loss and coupling ratio determination in fused fiber couplers," IEEE Photon. Technol. Lett, vol. 8, no. 3, pp. 399-401, 1996 https://doi.org/10.1109/68.481130
- T. Tazawa, T. Kanie, and M. Katayama, "Fiber-optic coupler based refractive index sensor and its application to biosensing," Appl. Phys. Lett. vol. 91, 113901-113903, 2007 https://doi.org/10.1063/1.2783278
- C. Bariain. I. R, F. J. Arregui, and M. Lopez-Amo, "Optical fiber humidity sensor based on a tapered fiber coated with agarose gel," Sensors and Actuators. B, Chemical vol. 69, no. 1/2, pp. 127-131, 2000 https://doi.org/10.1016/S0925-4005(00)00524-4
- R Chen, G F Fernando, T Butler and R. A. Badcock "A novel ultrasound fibre optic sensor based on a fused-tapered optical fibre coupler," Measurement Science & Technology, vol. 15, no. 8, pp. 1490-1495, 2004 https://doi.org/10.1088/0957-0233/15/8/010
- T. Bricheno and V. Baker "All-fiber polarization splitter/combiner," Electronic Letters, vol. 21, no. 6, pp. 251-252, 1985 https://doi.org/10.1049/el:19850179
- M. S. Yataki, D. N. Payne, and M. P. Varnham, "Allfibre polarizing beamsplitter," Electronics Letters, vol. 26. no. 6, 249-251, 1985 https://doi.org/10.1049/el:19850178
- A. Wang, K. A. Murphy "Optical-fiber temperature sensor based on differential spectral reflectivity," Smart Materials & Structures, vol. 1, no. 1, pp. 5-7, 1992 https://doi.org/10.1088/0964-1726/1/1/002
- Izawa, T., and Sudo, A., Optical fibers: materials and fabrication (KTK Scientific Publishers, Tokyo, 1987
- J. Villatoro, D. Monzon-Hernandez, and E. Mejia "Fabrication and modeling of uniform-waist single-mode tapered optical fiber sensors," Appl. Opt., vol. 42, no. 13, pp. 2278-2283, 2003 https://doi.org/10.1364/AO.42.002278
- B. Yun, N. Chen, and Y. Cui, "Highly Sensitive Liquid-Level Sensor Based on Etched Fiber Bragg Grating," IEEE Photon. Technol. Lett. : P, vol. 19, no. 21, pp. 1747-1749, 2007 https://doi.org/10.1109/LPT.2007.905093
- K. T. Kim, K. H. Lee, and S. Hwangbo, “A refractometer based on fiber-to-liquid planar waveguide coupler,” Sensors and Actuators A, Physical, vol. 126, no. 2, pp. 335-339, 2006 https://doi.org/10.1016/j.sna.2005.10.042
Cited by
- Enhanced Absorption Efficiency of Solar Cells Using Guided-mode Resonance vol.21, pp.1, 2010, https://doi.org/10.3807/KJOP.2010.21.1.001
- Transmission and Sensing Characteristics of the Biconically Tapered Cladded Multimode Fibers vol.13, pp.2, 2009, https://doi.org/10.3807/JOSK.2009.13.2.234
- Empirical Analysis of Widely Tunable Fused Fiber Coupler Assisted by External Medium of High Thermo-Optic Coefficient vol.30, pp.1, 2011, https://doi.org/10.1080/01468030.2010.539661
- Experimental Investigation of Fused Biconical Fiber Couplers for Measuring Refractive Index Changes in Aqueous Solutions vol.16, pp.1, 2016, https://doi.org/10.1109/JSEN.2015.2475320
- A Review of Microfiber-Based Temperature Sensors vol.18, pp.2, 2018, https://doi.org/10.3390/s18020461
- Fiber-optic Temperature Sensor Based on Bending Loss of Thermally Expanded Core Fiber vol.21, pp.1, 2010, https://doi.org/10.3807/KJOP.2010.21.1.012
- Temperature sensing characteristics of tapered Yb-doped fiber amplifiers vol.124, pp.22, 2013, https://doi.org/10.1016/j.ijleo.2013.04.052
- Highly sensitive temperature sensor using packaged optical microfiber coupler filled with liquids vol.26, pp.1, 2018, https://doi.org/10.1364/OE.26.000356
- Measurement of Optical Properties of a Liquid Based on a Side-polished Optical Fiber vol.27, pp.3, 2014, https://doi.org/10.4313/JKEM.2014.27.3.195
- High Sensitivity Refractive Index Sensor Based on Highly Overcoupled Tapered Fiber-Optic Couplers vol.17, pp.2, 2017, https://doi.org/10.1109/JSEN.2016.2629281
- Fiber-optic rotation angle sensor based on fused fiber coupler vol.19, pp.1, 2010, https://doi.org/10.5369/JSST.2010.19.1.062
- A fiber-optic UV sensor based on a side-polished single mode fiber covered with azobenzene dye-doped polycarbonate vol.160, pp.1-2, 2010, https://doi.org/10.1016/j.sna.2010.01.032
- Temperature sensing characteristics of tapered Tm3+-doped fiber amplifiers vol.27, pp.8, 2017, https://doi.org/10.1088/1555-6611/aa7d91
- Specialty Fiber Coupler: Fabrications and Applications vol.14, pp.4, 2010, https://doi.org/10.3807/JOSK.2010.14.4.326
- High Sensitivity Refractive Index Sensor Based on a Wet-Etched Fused Fiber Coupler vol.11, pp.7, 2011, https://doi.org/10.1109/JSEN.2010.2086054
- Hollow Fiber Coupler Sensor vol.19, pp.4, 2019, https://doi.org/10.3390/s19040806