대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제32권11호
  • /
  • Pages.970-977
  • /
  • 2008
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Resin Chock 교반기용 임펠러가 달린 축의 진동해석

Vibration Analysis of Shaft with Impeller for Resin Chock Mixing Machine

  • 발행 : 2008.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with the dynamic characteristics of the shaft with impeller model which is the most important part in developing the resin mixing machine. Through reverse engineering, it is possible to make the shaft with impeller geometry model which is necessary vibration characteristic analysis by commercial impeller. The natural frequency analysis and structural analysis using finite element analysis software are performed on the imported commercial shaft with impeller model. The most important fundamental natural frequency of the shaft with impeller model is around 14.5 Hz, which well agrees with modal testing. The most effective design variables were extracted by ANOM(analysis of means) and pareto chart. This paper presents approximation 2nd order polynomial as design variables using RSM(response surface methodology). Generally, RSM take 2 or 3 design variables, but this method uses 5 design variables with table of mixed orthogonal array. Further more, the analyzed result of the commercial shaft with impeller is to be utilized for the structural design of resin chock mixing machine.

키워드

참고문헌

  1. Kim, C. N., 2006, "Operational Deflection Shape and Modal Analysis Testing To Solve Resonance Problems," Trans. of Korean Society of Marine Engineering, Vol. 30, No. 2, pp. 190~198
  2. Cho, J. H., Oh, J. E., Im, D. G., Yoon, H. U. and Kang, S. J., 1992, "Modeling and Vibration Analysis of Steering System," Trans. of Korean Society for Noise Vibration Engineering, Vol. 2, No. 2, pp. 125~134
  3. Ewins, D. J., 2000, Modal Testing : Theory, Practice and Application, Research Studies Press LTD
  4. Hong, D. K., Woo, B. C., Chang, J. H., and Kang, D. H., 2007, "Optimum Design of TFLM with Constraints for Weight Reduction using Characteristic Function," IEEE Trans. Magn., Vol. 43, No. 4, pp. 1613~1616 https://doi.org/10.1109/TMAG.2006.892238
  5. Hong, D. K., Choi, S. C., and Ahn, C. W., 2006, "Robust Optimization Design of Overhead Crane with Constraint using the Characteristic Functions," International Journal of Precision Engineering and Manufacturing, Vol. 7, No. 2, pp. 12~17
  6. Hong, D. K. and Kim, J. M., 2008, "Optimum Design of Maglev Lift System's Electromagnet for Weight Reduction using Response Surface Methodology," International journal of COMPEL, Vol. 27, No. 4, pp. 797~805
  7. Lim, P. and Yang, G. E., 2007, "Optimization of Finish Cutting Condition of Impeller with Five-Axis Machine by Response Surface Method," journal of Korean Society of Mechanical Engineers, Vol. 31, No. 9, pp. 924~933 https://doi.org/10.3795/KSME-A.2007.31.9.924
  8. Park, J. H., Lee, J. H., Kim, B. H., Ahn, C. G. Kang, M. H. and Joo, Y. S., 2003, "A Development of Vibration Analysis Technique of A Mixer," proceeding of Korean Fluid Machinery Association, pp. 421~426