Abstract
This study presents a viscoelastic characterization of flexible pavement subjected to moving loads. A series of field tests have been conducted on three pavement sections (A2, A5, and A8) at the Korea Expressway Corporation (KEC) test road. The effect of vehicle speed on the responses of each test section was investigated at three speeds: 25 km/hr, 50 km/hr, and 80 km/hr. During the test, both longitudinal and lateral strains were measured at the bottom of asphalt layers and in-situ measurements were compared with the results of finite element (FE) analyses. A commercial FE package, ABAQUS was used to model each test section and a step loading approximation has been adopted to simulate the effect a moving vehicle. For viscoelastic analysis, relaxation moduli of asphalt mixtures were obtained from laboratory test. Field responses reveals the strain anisotropy (i.e., discrepancy between longitudinal and lateral strains) and the amplitude of strain normally decreases as the vehicle speed increases. In most cases, lateral strain was smaller than longitudinal strain, and strain reduction was more significant in lateral direction.
본 논문에서는 차량의 주행속도가 아스팔트 포장의 변형률 거동에 미치는 영향을 알아보기 위하여 현장시험을 실시하고 그 결과를 3차원 유한요소해석과 비교, 분석하였다. 한국도로공사 시험도로에서 기층의 두께가 다른 세 단면(A2, A5, A8)을 선정하고, 각 단면별로 세 가지의 주행속도(25, 50, 80km/hr)에 대한 종, 횡방향 변형률을 측정하였다. ABAQUS를 이용한 수치해석에서는 시험차량인 덤프트럭(단축-탠덤축)의 축하중을 단계하중(step loading)으로 모사하였으며, 시험도로 아스팔트 혼합물에 대한 선형 점탄성 물성 계수(E(t))를 적용하여 보다 현실적인 거동해석을 실시하였다. 주어진 시험 조건에서 아스팔트 층 하부에서 측정한 종, 횡방향 변형률의 차이(이방성)는 모든 단면에서 목격되었고, 수치해석결과 차량의 주행속도가 증가함에 따라 임계 지점에서 발생하는 최대 변형률의 크기는 감소하는 것으로 예측되었다. 또한, 최대변형률의 크기도 횡방향 변형률이 종방향 변형률에 비하여 약 27% 정도 작았으며, 차량의 속도가 증가함에 따라 최대 변형률의 감소폭도 횡방향이 약간 큰 것으로 나타났다.