초록
철근콘크리트 깊은 보는 콘크리트와 전단철근에 의한 전단저항 메커니즘의 성능에 의해 극한강도가 지배된다. 깊은 보의 거동은 전단지간대 유효깊이의 비, 휨철근비, 하중점과 지지점의 조건, 그리고 사용재료의 성질 등의 여러 변수간의 복합적인 역학관계로 인해 매우 복잡하다. 본 논문에서는 이러한 깊은 보의 강도 및 거동 특성을 모두 반영하여 단순지지 철근콘크리트 깊은 보의 설계를 수행할 수 있는 부정정 스트럿-타이 모델을 제안하였다. 또한 현 스트럿-타이 모델 설계기준을 부정정 스트럿-타이 모델을 이용한 단순지지 철근콘크리트 깊은 보의 설계에 합리적으로 적용하기 위해 수직 트러스 메커니즘에 의해 전달되는 하중의 크기 즉 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 하중분배율의 결정 시 단순지지 철근콘크리트 깊은 보의 전단에 대한 연성파괴거동을 확보하기 위하여 깊은 보의 전단저항 메커니즘을 구성하는 콘크리트 스트럿과 수직철근 타이가 동시에 파괴된다는 전단평형철근비 개념을 도입하였으며, 다양한 수치해석결과를 바탕으로 단순지지 깊은 보의 강도 및 거동에 영향을 미치는 전단지간대 유효깊이의 비, 휨철근비, 그리고 콘크리트의 압축강도 등의 설계변수를 고려하였다. 본 논문의 후속편에서는 기존의 여러 설계방법들과 본 연구에서 제안한 방법을 이용하여 파괴실험이 수행된 다양한 종류의 단순지지 깊은 보의 강도를 평가하고, 본 연구에서 제안한 방법의 적합성을 검증하였다.
The ultimate strengths of reinforced concrete deep beams are governed by the capacity of the shear resistance mechanism composed of concrete and shear reinforcing bars, and the structural behaviors of the beams are mainly controlled by the mechanical relationships according to the shear span-to-effective depth ratio, flexural reinforcement ratio, load and support conditions, and material properties. In this study, a simple indeterminate strut-tie model reflecting all characteristics of the ultimate strengths and complicated structural behaviors is presented for the design of simply supported reinforced concrete deep beams. In addition, a load distribution ratio, defined as a magnitude of load transferred by a vertical truss mechanism, is proposed to help structural designers perform the design of simply supported reinforced concrete deep beams by using the strut-tie model approaches of current design codes. In the determination of a load distribution ratio, a concept of balanced shear reinforcement ratio requiring a simultaneous failure of inclined concrete strut and vertical steel tie is introduced to ensure the ductile shear failure of reinforced concrete deep beams, and the prime design variables including the shear span-to-effective depth ratio, flexural reinforcement ratio, and compressive strength of concrete influencing the ultimate strength and behavior are reflected upon based on various and numerous numerical analysis results. In the companion paper, the validity of presented model and load distribution ratio was examined by employing them to the evaluation of the ultimate strengths of various simply supported reinforced concrete deep beams tested to failure.