Journal of information and communication convergence engineering

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지

Reliability Evaluation of RF Power Amplifier for Wireless Transmitter

  • Choi, Jin-Ho (Dept. of Computer Engineering, Pusan University of Foreign Studies)
  • Published : 2008.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

A class-E RF(Radio Frequency) power amplifier for wireless application is designed using standard CMOS technology. To drive the class-E power amplifier, a class-F RF power amplifier is used and the reliability characteristics are studied with a class-E load network. The reliability characteristic is improved when a finite-DC feed inductor is used instead of an RF choke with the load. After one year of operating, when the load is an RF choke the output current and voltage of the power amplifier decrease about 17% compared to initial values. But when the load is a finite DC-feed inductor the output current and voltage decrease 9.7%. The S-parameter such as input reflection coefficient(S11) and the forward transmission scattering parameter(S21) is simulated with the stress time. In a finite DC-feed inductor the characteristics of S-parameter are changed slightly compared to an RF-choke inductor. From the simulation results, the class-E power amplifier with a finite DC-feed inductor shows superior reliability characteristics compared to power amplifier using an RF choke.

Keywords

References

  1. A. A. Abidi, RF CMOS comes of age," IEEE VLSI Circuits Dig., no. 6, pp. 113-116, Jun 2003
  2. E. Morifuji, H. S. Momose, T. Ohguro, T. Yoshitomi, H. Kimijima, F. Matsuoka, M. Kinugawa, Y. Katsumata and H. Iwai, "Future perspective and scaling down Roadmap for RF CMOS," Symposium on VLSI Circuits Digest of Technical Papers, pp. 165-166, 1999
  3. P. J. Sulivan, B. A. Xavier and W. H. Ku, "Low Voltage Performance of a Microwave CMOS Gilbert Cell Mixer," IEEE J. Solid-State Circuits, vol. 32, pp. 1151-1155, 1997 https://doi.org/10.1109/4.597309
  4. R. A. Rafla and M. N. Gamal, "Design of a 1.5V CMOS Integrated 3GHz LNA," in proceeding ISCAS, pp. 440-443, 1999
  5. Steve Hung-Lung Tu and Fu Jen, "Class E RF Tuned Power Amplifiers in CMOS Technologies : Theory and Circuit Design Considerations," IEDEE Radio Communications, pp. S6-S11, September 2004
  6. King-Chun Tsai and Paul R. Gray, "A 1.9GHz, 1W CMOS Class-E Power Amplifier for Wireless Communications," IEEE Journal of Solid-State Circuits, vol. 34, no. 7, pp. 962-970, July 1999 https://doi.org/10.1109/4.772411
  7. Chris Trask, "Class-F Amplifier Loading Networks : A Unified Design Approach," IEEE MTT-S Digest, pp. 351-354, 1999
  8. C. Yoo and Q. Huang, "A Common-Gate Switched 0.9W Class-E Power Amplifier with 41% PAE in 0.25um CMOS," IEEE. Journal of Solid-State Circuits, vol. 36, pp. 823-830, May 2001 https://doi.org/10.1109/4.918921
  9. E. Xiao, J. S. Yuan and H. Yang, "CMOS RF and DC reliability subject to hot carrier stress and oxide soft breakdown," IEEE Trans. Device Mater. Rel., vol. 4, no. 3, pp. 92-98, Mar. 2004 https://doi.org/10.1109/TDMR.2004.824365
  10. W. C. Lin, T. C. Wu, Y. H. Tsai, L. J. Du and Y. C. King, "Reliability evaluation of class-E and class-A Power Amplifiers with nanoscaled CMOS Technology," IEEE Trans. on Electron Devises, vol. 52, no. 7, July 2005
  11. J. E. Chung, M. C. Jeng, J. E. Moon, P. K. Ko and C. Hu, "Low-voltage Hot-electron currents and degradation in deep submicronmeter MOSFETs,' IEEE Trans. on Electron Devices, vol. 37, no. 7, pp. 1651-1657, July 1990 https://doi.org/10.1109/16.55752
  12. Qiang Li, Jinlong Zhang, Wei Li, Jiann S. Yuan, Yuan Chen and Anthony S. Oates, "RF Circuit Performance Degradation Due to Soft Breakdown and Hot-Carrier Effect in Deep-Submicronmeter CMOS Technology,' IEEE Trans. on Microwave and Techniques, vol. 49, no. 9, pp. 1546-1551, September 2001 https://doi.org/10.1109/22.942565