Abstract
As a result of recent research, it is reported that the periodic replacements criterion of rails is able to extend as grinding rail surface and using the continuous welded rail (CWR). This study evaluated correlation between conditions of track and load capacity of rail by analysing the dynamic response of track while the metro train is running. Also, it was converted the measured stress waveform into stress frequency histogram by the rain-flow counting methods, and then accumulated fatigue damage ratio and remaining service life of laid rail were calculated so as the apply the equivalence of stress to S-N curve of a new welded rail. Finally, this study suggests a revision of the periodic replacements criterion of CWR, which was based on accumulated passing tonnage, classified by the types and conditions of track system.
최근 연구결과 레일연마 및 장대레일화로 누적통과톤수에 의한 레일교체기준의 연장이 가능한 것으로 보고되었다. 본 연구에서는 현재 도시철도에서 사용 중인 대표 궤도구조에 대해 실운행 열차하중에 의한 궤도의 동적 응답을 분석하여 현 궤도의 상태평가를 하였으며 궤도의 상태 변화에 따른 레일의 부담력을 검토하였다. 또한, 측정된 응력파형을 Rainflow Count Method를 이용하여 응력히스토그램을 작성하고 등가응력을 상정하여 신규 레일 용접부의 S-N 선도에 적용함으로써 노후레일의 누적피로손상도 및 휨 피로수명을 산정하였다. 최종적으로 본 연구에서는 궤도구조 및 상태를 고려한 레일교체기준의 개정을 제안하고자 하였다.