DOI QR코드

DOI QR Code

A Study on the Fine Wire Drawing Process Design to Improve the Productivity

생산성 향상을 위한 세선 인발공정설계에 관한 연구

  • Published : 2008.07.01

Abstract

The control of wire temperature is very important in the fine wire drawing process. The wire speed should be increased, and the wire temperature should be dropped as much as possible. Up to now, the process design of wire drawing process depends on the experiences of experts. In this study, a wire drawing process design method was proposed to increase the productivity. The proposed method of this study includes the pass schedule and the design of a multi pass wire drawing machine. A pass schedule was performed based on the calculation of the wire temperature. Also, a new multi pass wire drawing machine was manufactured to apply the designed pass schedule. Through the wire drawing experiment, the effectiveness of the proposed process design method was evaluated. The final drawing speed was increased from 1,100m/min to 2,000m/min without deterioration of final drawn wire.

Keywords

References

  1. JSTP, 1990, Drawing process(Japaness), Korona
  2. Y. Nakamura, T. Fujita, H. Kawakami, Y. Yamada, 2001, New cooling system for high-speed wire drawing, Wire J. Int., pp. 59-68
  3. M. Kalweit, 1997, Wire cooling on high-performance drawing machine, Wire J. Int., July, pp. 88-91
  4. Y. M. Park, M. A. Kim, B. M. Kim, Y. S. Kim, D. H. Kim, 2002, Innovative productivity in the steel cord wiredrawing process, Wire J. Int., June, pp. 60-68
  5. W. H. Hwang, S. G. Lee, B. M. Kim, W. S. Ko, 2005, Pass design of wet-drawing with ultra high speed for steel cord, Trans. Mater. Process., Vol. 14, No. 9, pp. 785-790 https://doi.org/10.5228/KSPP.2005.14.9.785
  6. BS, 1997, Japan patent 9-24413
  7. S. K. Lee, B. M. Kim, 2005, Analysis of multi-pass wet wire drawing process and its application, Trans. Mater. Process., Vol. 14, No. 8, pp. 689-695 https://doi.org/10.5228/KSPP.2005.14.8.689