Abstract
In order to investigate the influence factors to compressive and tensile strength of basalt in Cheju Island, rock samples of Pyosenri basalt, trachy-basalt and scoria were taken from Seoguipo-Si Seongsan-Eup area, and a series of uniaxial compressive strength test and Brazilian test were carried out. Especially, these tests were performed in consideration of the loading speed, the moisture content in rock sample, and the anisotropy of rock strength. The uniaxial compressive strength was increased gradually as the loading speed rose. The increasing quantity of uniaxial compressive strength had a difference in each rock types. Also, the strength was decreased with increasing the moisture contents in rock sample by pore water. As the result of test considering the anisotropy of rock strength, the compressive strength in condition of failure occurred parallel to stratified layer is decreased about 12-26% more than that in condition of failure occurred inclined to stratified layer.
본 연구에서는 제주도 현무암의 압축강도와 인장강도에 영향을 미치는 요인을 조사하기 위하여 서귀포시 성산읍 일대의 표선리 현무암, 조면암질 현무암 및 스코리아 시료를 채취하고 각각에 대한 일축압축시험과 압열인장시험을 실시하였다. 특히 하중재하시 가압속도, 암석의 수분함량 및 암석의 이방성을 고려하여 시험을 실시하였다. 일축압축시험시 하중재하속도가 증가함에 따라 일축압축강도가 증가하며 일축압축강도의 증가정도는 암종에 따라 차이가 있음을 알 수 있다. 그리고 암석시료내 수분함량이 증가함에 따라 공극내 물의 영향으로 인하여 강도는 저하되었다. 암석시료의 강도이방성을 고려한 시험결과 층리면과 평행하게 파괴가 발생되는 경우가 일정한 경사를 가지고 파괴가 발생하는 경우보다 약 12-26%의 일축압축강도가 저하됨을 알 수 있다.