Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지

An Integration of Product Data Management and Software Configuration Mangement

제품자료관리와 소프트웨어구성관리 통합

  • 도남철 (경상대학교 공과대학 산업시스템공학부, 공학연구원) ;
  • 채경석 (경상대학교 공과대학 산업시스템공학부, 공학연구원)
  • Published : 2008.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper introduces an integration of Product Data Management (PDM) and Software Configuration Management (SCM). PDM and SCM have supported development of mechanical products and software products respectively. The importance of software components in the current products increases rapidly since the software enables the products to satisfy various customer requirements efficiently. Therefore the current product development needs enhanced product data management that can control both the hardware and software data seamlessly. This paper proposes an extended product data model for integrating SCM into PDM. The extension enables PDM document management to support the version control for software development. It also enables engineers to control both the software and hardware parts as integrated data objects during product configuration and engineering change management. The proposed model is implemented by using a commercial Product Lifecycle Management (PLM) system and a development of a network based robot system is tested by the implemented product development environment.

Keywords

References

  1. 최병삼, 복득규, "자동차와 IT간 컨버전스 동향과 과제", SERI 경제 포커스, 제65호, 2005
  2. CAD & Graphics, "PLM업계의 대안과 비전", CAD & Grpahics 6월호, 2005년
  3. Estublier, J. Favre, J.-M. and Morat, P., "Toward SCM/PDM Integration, System Configuration Management", SCM-8, Lecture Notes in Computer Science 1439, Springer, pp. 75-94, 1998
  4. Westfechtel, B. and Conradi, R., "Software Configuration Management and Engineering Data Management: Differences and Similarities", SCM-8, Lecture Notes in Computer Science 1439, Springer, pp. 96-106, 1998
  5. Crnkovic, I., Asklund, U. and Dahlqvist, A. P., Implementing and Integrating Product Data Management and Software Configuration Management, Artech House Publishers, 2003
  6. Dahlqvist, A. P., Ivica, C. and Larsson, M., "Managing Complex Systems-Challenges for PDM and SCM", 23th ICSE, Toronto, Canada, 2001
  7. Krebs, T., Hots, L. and Gunter, A., "Knowledgebased Configuration for Configuring Combined Hardware/Software Systems", PuK 2002, 2002
  8. Krebs, T., Wolter, K. and Hotz, L., "Model-based Configuration Support for Product Derivation in Software Product Families", PuK 2005, 2005
  9. El-khoury, J., "Model Data Management-Towards a Common Solution for PDM/SCM System", ACM 2005, September 5-6, Lisbon, Portugal, 2005
  10. UGS TeamCenter Engineering, http://www.ugs.com, 2007
  11. PTC WinChil, http://www.ptc.com, 2007
  12. Mannisto, T., Soininen, T. and Sulonen, R., "Configurable Software Product Families", ECAI 2000 Configuration Workshop, 2000
  13. 도남철, "일관된 제품자료관점을 지원하는 설계변경 전달에 관한 연구", 한국CAD/CAM학회 논문집, 제8권, 제2호, pp. 90-100, 2003
  14. Dassualt Systems SmarTeam, http://www.smarteam.com, 2007