References
- Yuji Ishida, Kazunori Hakiai, Akiyoshi Baba and Tanemasa Asano, "Electrostatic Inkjet Patterning Using Si Needle Prepared by Anodization," Japanese Journal of Applied Physics, Vol. 44, No. 7B, pp. 5786-5790, July 2005 https://doi.org/10.1143/JJAP.44.5786
- S. Lee, D. Byun, S. J. Han, S. U. Son, Y. J. Kim, H. S. Ko, "Electrostatic Droplet Formation and Ejection of Colloid," MHS, July 31, 2004
- S.U.Son, Y.M.Kim, J.Y.Choi, S.H.Lee, H.S.Ko, and D.Y.Byun, "Fabrication of MEMS Inkjet Head for Drop-on-Demand Ejection of Electrostatic Force Method," Trans. KIEE. Vol.56. August, 2007
- C.M. Ho, "Fluidics-the link between micro and nano sciences and technologies," IEEE Int. Conf. MEMS, pp.375-384, 2001
- E. Lee, CRC Press, Microdrop Generation, 2003
- G. Taylor : Proc. Roy. Soc. Lond. A, 313, 1969
- A. Sou, K. Sasai, and T. Nakajima, "Control of Ink Transportation in Electrostatic Inkjet Printer," ASME Fluid Engineering Division Summer Meeting, July 2002
- Y. J. Kim, H. S. Ko, S. H. Lee, S. U. Son, D. W. Jung and D. Y. Byun, "Electrostatic droplet ejector with monolithic fabrication of nozzle," Journal of the Korean Physical Society, Vol.51, pp.S42-S46, 2007 https://doi.org/10.3938/jkps.51.42
- S. H. Lee, D. Y. Byun, D. W. Jung, J. Y. Choi, Y. J. Kim, J. H. Yang, S. J. Han, S. U. Son, S. B. Quang Tran and H. S. Ko, "Pole-type ground electrode in nozzle for electrostatic field induced drop-ondemand inkjet head" Sensors & Actuators, Vol. 141, No. 2, pp.506-514, 2008 https://doi.org/10.1016/j.sna.2007.08.019
- Hiroyuki Kawamoto, Shinjiro Umezu and Ryuta Koizumi, "Fundamental investigation on electrostatic ink jet phenomena in pin-to-plate discharge system," Journal of imaging science and technology, Vol 49, 1, pp.19-27, 2005
- Yuji Ishida, Keigo Sogabe, Kazunori Hakiai, Akiyoshi Baba and Tanemasa Asano, "Properties of Ink- Droplet Formation in Double-Gate Electrospray," Japanese Journal of Applied Physics, Vol. 45, No. 8A, pp.6475-6480, 2006 https://doi.org/10.1143/JJAP.45.6475
Cited by
- Advanced printing and deposition methodologies for the fabrication of biosensors and biodevices vol.135, pp.5, 2010, https://doi.org/10.1039/b916888e
- Development and ejection behavior of different material-based electrostatic ink-jet heads vol.48, pp.1-4, 2010, https://doi.org/10.1007/s00170-009-2255-9
- Hybrid piezo-electrostatic inkjet head for printed electronics vol.226, pp.3, 2012, https://doi.org/10.1177/0954406211414985
- Development of Electrostatic Inkjet Head by Integrating Metallic and Silica Capillaries for Stable Meniscus vol.27, pp.11, 2012, https://doi.org/10.1080/10426914.2012.675537
- Inkjet printing for biosensor fabrication: combining chemistry and technology for advanced manufacturing vol.15, pp.12, 2015, https://doi.org/10.1039/C5LC00235D
- Airflow assisted printhead for high-resolution electrohydrodynamic jet printing onto non-conductive and tilted surfaces vol.107, pp.5, 2015, https://doi.org/10.1063/1.4928482
- Fabrication and evaluation of a protruding Si-based printhead for electrohydrodynamic jet printing vol.27, pp.12, 2017, https://doi.org/10.1088/1361-6439/aa9156