References
- Zok, F.W., Waltner, S.A., Wei, Z., Rathbun, H.J., McMeeking, R.M. and Evans, A.G., 2004, “A Protocol for Characterizing the Structural Performance of Metallic Sandwich panels: Application to Pyramidal Truss Cores,” International J. of Solids and Structures, Vol. 41, pp. 6249-6271 https://doi.org/10.1016/j.ijsolstr.2004.05.045
- Chiras, S., Mumm, D.R., Wicks, N., Evans, A.G., Hutchinson, J.W., Dharamasena, K. Wadley, H.N.G. and Fichter, S., 2002, “The Structural Performance of Near-Optimized Truss Core Panels,” International J. of Solids and Structures, Vol. 39, pp. 4093-4115 https://doi.org/10.1016/S0020-7683(02)00241-X
- Wallach, J.C. and Gibson, L.J., 2001, “Mechanical Behavior of a Three-Dimensional Truss Materials,” International J. of Solids and Structures, Vol. 38, pp. 7181-7196 https://doi.org/10.1016/S0020-7683(00)00400-5
- Sypeck, D.J. and Wadley, H.N.G., 2001, “Multifunctional Microtruss Laminates: Textile Synthesis and Properties,” J. Mater. Res., Vol. 16, pp. 890-897 https://doi.org/10.1557/JMR.2001.0117
- Hyun, S., Karlsson, A. M., Torquato, S. and Evans, A. G., 2003, “Simulated Properties of Kagome and Tetragonal Truss Core Panel,” Int. J. Solids and Structures, Vol. 40, pp. 6989-6998 https://doi.org/10.1016/S0020-7683(03)00350-0
- Kang, K.J. and Lee, Y. H., 2005, “Three-Dimensional Cellular Light Structures Rirectly Woven by Continuous Wires and the Manufacturing Method of the Same,” US Patent Pending (Application 10/578,421)
- Lee, Y.H., Lee, B.K., Jeon, I. and Kang, K.J., 2007, “Wire-Woven Bulk Kagome (WBK) Truss Cores,” Acta Materialia, Vol. 55, pp. 6039-6400 https://doi.org/10.1016/j.actamat.2007.07.023
- Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchison, J.W., and Wadley, H.N.G., 2000, Metal Foams: A Design Guide, Butterworth Heinemann
- Hyun, S., Choi, J.E. and Kang, K.J., 2007, “Effect of Imperfection on the Mechanical Behavior of Wire-Woven Bulk Kagome Truss PCMs Under Shear Loading,” Proceedings of MetFOAM
- Hyun, S., Choi, J.E. and Kang, K.J., 2007, “Effects of Imperfections on the Mechanical Behaviors of a Wire-Woven Bulk Kagome Cellular Metal Subjected to Compression,” Submitted to Mechanics of Materials
- Choi, J.E., Lee, S.C. and Kang, K.J., 2008, “Effect of Wire Diameter to Pitch Ratio on Mechanical Behavior of Wire-Woven Bulk Kagome Truss PCMs Under Compression,” Proceedings of Annual Spring Meeting Korean Society of Mechanical Engineers
- Lee, Y.H., Choi, J.E., Jeon, I. and Kang, K.J., 2007. “A New Method to Fabricate Bulk PCMs from Continuous Wires and the Mechanical Behaviors,” Trans. of the KSME(A), Vol. 31, pp. 245-252 https://doi.org/10.3795/KSME-A.2007.31.2.245
- Wicks, N. and Hutchinson, J. W., 2001, “Optimal Truss Plates,” International Journal of Solids and Structures, Vol. 38, pp. 5165-5183 https://doi.org/10.1016/S0020-7683(00)00315-2
- Lee, Y.H., 2007, “Mechanical Behaviors of Bulk Kagome Truss PCMs Woven of Metal Wires,” Master Thesis, Chonnam National University, Korea
Cited by
- Finite Element Simulation of Behavior of WBK Cored Sandwich Panels Subjected to Bending Loads vol.33, pp.4, 2009, https://doi.org/10.3795/KSME-A.2009.33.4.353