DOI QR코드

DOI QR Code

Analysis on Climbing Capability of Wheel Drive Robotic Mechanisms

바퀴구동형 로봇 메커니즘의 등반능력 해석

  • Kim, Byoung-Ho (Bio-mimetic Control & Robotics Lab., Div. of Electrical and Mechatronics Eng., Kyungsung Univ.)
  • 김병호 (경성대학교 전기전자메카트로닉스공학부 생체모방제어 및 로봇연구실)
  • Published : 2008.06.25

Abstract

It is well-known that a kind of wheel drive mechanism is usefully employed in various service robots. One of the essential requirements for such robots is regarded as the capability of climbing that enables them to run on an inclined road smoothly. So, this paper considers the capability of climbing in a wheel drive robotic mechanism and proposes a necessary discriminating condition to determine the specification of a driving actuator which will be employed. Consequently, it is expected that the proposed discriminating condition can be applied to wheel drive robotic mechanisms in the design aspect.

바퀴구동형 메커니즘은 다양한 서비스 로봇에 유용하게 활용되고 있다. 이러한 로봇을 위하여 가장 기본적이면서 중요하게 요구되는 성능중의 하나는 경사진 도로를 어려움없이 주행할 수 있는 등반능력으로 볼 수 있다. 본 논문에서는 이러한 바퀴 구동형 로봇 메커니즘의 등반능력을 고려하고, 경사면을 원활하게 주행하기 위한 구동기의 사양을 결정하는데 유용한 필요조건을 제시하고자 한다. 결과적으로, 이러한 조건은 이동로봇 메커니즘의 설계에 유용하게 활용될 수 있을 것으로 기대한다.

Keywords

References

  1. E. T. Baumgartner, R. G. Bonitz, J. P. Melko, L. R. Shiraishi, P. C. Leger, A. Trebi-Ollennu, "Mobile manipulation for the Mars exploration rover - a dexterous and robust instrument positioning system," IEEE Robotics & Automation Magazine, vol. 13, no. 2, pp. 27-36, June 2006
  2. D. Wettergreen, J. Teza, and B. Staszel, "Robotic astrobiology in the Atacama desert," Video Pmc.(220005. wmv) of the 2006 IEEE Int. Conf. on Robotics and Automation, 2006
  3. J. Minguez, L. Montesano, and L. Montano, "Autonomous motion generation for robotic wheelchair," Video Proc. (220013. wmv) of the 2006 IEEE Int. Conf. on Robotics and Automation, 2006
  4. R. Morales, V. Feliu, A. Gonzalez, and P. Pintado, "Coordinated motion of a new staircase climbing wheelchair with increased passenger comfort," Proc. of the 2006 IEEE Int. Conf. on Robotics and Automation, pp. 3995-4001,2006
  5. K. loi, H. Igurashi, and A. Muramami, "Design of a gravitational wheeled type robot," Proc. of the 32nd Int. Symposium on Robotics, pp. 175-179. 2001
  6. A. Salerno and J. Angeles, "The control of semiautonomous two-wheeled robots undergoing large payload-variations," Proc. of the 2004 IEEE Int. Conf. on Robotics and Automation, pp. 1740-1745, 2004
  7. K. Pathak, J. Franch, and S. K. Agrawal, "Velocity and position control of a wheeled inverted pendulum by partial feedback linearization," IEEE Trans. on Robotics, vol. 21, no. 3, pp. 505-513, 2005 https://doi.org/10.1109/TRO.2004.840905
  8. Y. Ogura, H. Akikawa, K. Shimomura, H. Kondo, A. Morishima, H.-O. Lim, and A. Takanishi, "Development of a new humanoid robot WABlAN2," Proc. of the 2006 IEEE Int. Conf. on Robotics and Automation, pp. 76-81, 2006
  9. Y. Hada, K. Takese, H. Gakuhari, and E .. I. Hemeldan, "Delivery service robot using distributed acquisition, actuators and intelligence," Proc. of the 2004 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 2997-3002, 2004
  10. S. Nakajima, E. Nakano, and T. Takahashi, "Motion control technique for practical use of a leg-wheel robot on unknown ourdoor rough terrains," Proc. of the 2004 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, pp. 1353-1358,2004
  11. http.://www.daese.corn/, Daese M. Care, Ltd., Korea
  12. http.://www.korec.re.kr/, Korea Orthopedics & Rehabilitation Engineering Center, Korea

Cited by

  1. Estimate the Inclination Angle using Traveling Speed of Segway Robot on the Slope vol.20, pp.11, 2014, https://doi.org/10.5302/J.ICROS.2014.13.0011