References
- Atoyan, S. V., Generalov, M. B. and Trutnev, N. S., "Calculation of force parameters during compaction of powder materials in screw extruders," Chemical and Petroleum Engineering, Vol. 34, No. 11-12, pp. 730-734, 1998 https://doi.org/10.1007/BF02418286
- Adams, G. P. and Soedel, W., "Computation of compression loads in twin screw compressors," Journal of Mechanical Design, Transaction of ASME, Vol. 117, No.6,pp. 512-519, 1995 https://doi.org/10.1115/1.2826712
- Zhou, Z., Wang, D. and Zhu, T., "Analysis of the Applied Forces in Twin-screw Refrigerant Compressors," In: Schuetz, W., Proceedings of International Compressor Engineering Conference. West Lafayette: Purdue University, Vol. 1, pp. 8-15, 1990
- Litvin, F. L. and Fuentes A., "Gear geometry and applied theory," Cambridge University Press, pp. 565-569, 2004
- Kumar, A., Ganjyal, G. M., Jones, D. D. and Hanna, M. A., "Modeling residence time distribution in a twin-screw extruder as a series of ideal steady-state flow reactors," Journal of Food Engineering, Vol. 84, Issue 3, pp. 441-448, 2008 https://doi.org/10.1016/j.jfoodeng.2007.06.017
- Bakalis, S. and Karwe, M. V., "Velocity distributions and volume flow rates in the nip and translational regions of a co-rotating, self-wiping, twin-screw extruder," Journal of Food Engineering, Vol. 51, Issue 4, pp. 273-282, 2002 https://doi.org/10.1016/S0260-8774(01)00068-1
- Adewale, A. O., "Newtonian flow in an inter-meshing counter-rotating twin screw extruder," Journal of Material processing Technology, Vol. 128, Issues 1-3, pp. 196-204, 2002 https://doi.org/10.1016/S0924-0136(02)00451-X
- Lee, H. S. and Isayev, A. I., "Numerical Simulation of Flow-Induced Birefringence: Comparison of Injection and Injection/Compression Molding," International Journal of Precision Engineering and Manufacturing, Vol. 8, No.1, pp. 66-72, 2007
- Geng, X. Z., "Twin-screw extruder and its applications," Light industry press, pp. 217-218, 2003
- Jin, S. H., Hwang, G. W. and Cho, K. Z., "Analysis of the 3-D stress wave in a plate under impact load by Finite Element Method," International Journal of Precision Engineering and Manufacturing, Vol. 2, No. 2, pp. 5-9, 2001
- Lee, T. W., "The Finite Element Analysis and the optimum geometric design of linear motor," International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 4, pp. 73-77, 2005
- Carreras, F. J., Medrano, O. G. and Naveira, A. M., "Differential Geometry," Springer-Verlag, pp. 86-90, 1989
- Oprea, J., "Differential Geometry and its Applications," Prentice Hall, pp. 137-156, 2006
- Mohan, S., Kweon S. H., Lee, D. M. and Yang, S. H., "Parametric NURBS Curve Interpolators: A Review," International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 2, pp. 84-92, 2008
- Liu, F., Lin, B. and Zhang, X. F., "Numerical Design Method for Water-Lubricated Hybrid Sliding Bearings," International Journal of Precision Engineering and Manufacturing, Vol. 9 No. 1, pp. 47-50, 2008
- Wei, J., Zhang, G. H., Li, F. J. and Jiang, C. L., "Study on Parameter Optimization of Profile Curve Design on a Novel Differential Twin Screw Kneader," Chinese Mechanical Engineering, Vol. 19, No. 7, pp. 787-792, 2008