References
- Masaki, T., Kawata, K. and Masuzawa, T., "Micro Electro-Discharge Machining and Its Applications," Proc. IEEE Micro Electro Mechanical Systems: An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots, pp. 21-26, 1990
- Kim, Y.-T., Park,S.-J. and Lee, S.-J., "Micro / Meso - Scale Shapes Machining by Micro EDM Process," International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 2, pp. 5-11, 2005
- Masuzawa, T. and Toenshoff, H. K., "Three-Dimensional Micromachining by Machine Tools," CIRP Annals - Manufacturing Technology, Vol. 46, No. 2, pp. 621-628, 1997 https://doi.org/10.1016/S0007-8506(07)60882-8
- Jung, J. W., Ko, S. H., Jeong, Y. H., Min, B. K. and Lee, S. J., "Real-Time Gap Control for Micro-EDM: Application in a Microfactory," International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 1, pp. 3-6, 2008
- Lim, J. H., Je, S. U., Ryu, S. H. and Chu, C. H., "Distortion of the Bottom Surface in Micro Cavity Machining Using MEDM," International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 4, pp. 44-48, 2005
- Luo, Y. F., "Dependence of Interspace Discharge Transitivity Upon the Gap Debris in Precision Electrodischarge Machining," Journal of Materials Processing Technology, Vol. 68, No. 2, pp.121-131, 1997 https://doi.org/10.1016/S0924-0136(96)00019-2
- Mohri, N., Saito, N. and Higashi, M., "New Process of Finish Machining on Free Surface by EDM Methods," 41st General Assembly of CIRP, Vol. 40, No. 1, pp. 207-210, 1991
- Wong, Y. S., Lim, L. C., Rahuman, I. and Tee, W. M., "Near-Mirror-Finish Phenomenon in EDM Using Powder-Mixed Dielectric," Journal of Materials Processing Technology, Vol. 79, No. 1-3, pp. 30-40, 1998 https://doi.org/10.1016/S0924-0136(97)00450-0
- Wu, K. L., Yan, B. H., Huang, F. Y. and Chen, S. C., "Improvement of Surface Finish on SKD Steel Using Electro-Discharge Machining with Aluminum and Surfactant Added Dielectric," International Journal of Machine Tools and Manufacture, Vol. 45, No. 10, pp. 1195-1201, 2005 https://doi.org/10.1016/j.ijmachtools.2004.12.005
- Pecas, P. and Henriques, E., "Influence of Silicon Powder-Mixed Dielectric on Conventional Electrical Discharge Machining," International Journal of Machine Tools and Manufacture, Vol. 43, No. 14, pp. 1465-1471, 2003 https://doi.org/10.1016/S0890-6955(03)00169-X
- Yan, B.-H. and Chen, S.-L., "Effectsof Dielectric With Suspended Aluminum Powder on EDM," Chung-Kuo Chi Hsueh Kung Ch'eng Hsueh Pao/Journal of the Chinese Society of Mechanical Engineers, Vol. 14, No. 3, pp. 307-312, 1993
- Zhao, W. S., Meng, Q. G. and Wang, Z. L., "The Application of Research on Powder Mixed EDM in Rough Machining," 10th International Manufacturing Conference, pp. 30-33, 2002
- Narumiya, H., Mohri, N., Saito, N., Otake, H., Tsnekawa, Y., Takawashi, T. and Kobayashi, K., "EDM by Powder Suspended Working Fluid," 9th International Symposium for Electro-Machining, pp. 5-8, 1989
- Chow, H.-M., Yan, B.-H., Huang, F.-Y. and Hung, J.-C., "Study of Added Powder in Kerosene for the Micro-Slit Machining of Titanium Alloy Using Electro-Discharge Machining," Journal of Materials Processing Technology, Vol. 101, No. 1, pp. 95-103, 2000 https://doi.org/10.1016/S0924-0136(99)00458-6
- Yan, B. H. and Chen, S. L., "Characteristics of SKD11 by Complex Process of Electrical Discharge Machining Using Liquid Suspended with Alumina Powder," Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 58, No. 9, pp. 1067-1072, 1994 https://doi.org/10.2320/jinstmet1952.58.9_1067