References
- EPRI, 2004, “Materials Reliability Program : Welding Residual and Operating Stresses in PWR Alloy 182 Butt Welds (MRP-106), EPRI Report
- Moffat, G., Bamford, W. H., Seeger, D., 2001, “Development of the Technical Basis for Plant Startup for the V.C Summer Nuclear Plant,” Trans. of ASME PVP conference, PVP-Vol. 427, pp. 33-39
- Fox, M., 1979, “An Overview of Intergranular Corrosion Cracking in BWRs,” Journal of materials in energy system, 1:3
- Kim, J.S, Jin, T.E., Dong, P., Prager, M., 2003, “Development of Residual Stress Analysis Procedure for Fitness-For-Service Assessment of Welded Structure,” Transactions of the KSME(A), Vol. 27, pp.713-723 https://doi.org/10.3795/KSME-A.2003.27.5.713
- Yaghi, A., Gyde, T. H., Becker, A. A., Sun, W., Williams, J. A., 2006, “Residual Stress Simulation in Thin and Thick-Walled Stainless Steel Pipe Welds Including Pipe Diameter Effects,” International Journal of Pressure Vessels and Piping, Vol. 83, pp. 864-874 https://doi.org/10.1016/j.ijpvp.2006.08.014
- Courtin, S., Gilles, P., 2006, “Detailed Simulation of an Overlay Repair on a 14” Dissimilar Material Weld,” Trans. of ASME PVP Conference, PVP2006-ICPVT-11-93823
- British Energy Generation Ltd., 2006, “Assessment of the Integrity of Structures Containing Defects,” R6, Revision 4
- U.S. Nuclear Regulatory Commission, 1992, “Technical Report on Material Selection and Processing Guidelines for BWR Coolant Pressure Boundary Piping-Final Report,” NUREG-0313, Revision 2
- Limpus, C.R., Dijamco, D. G., Bax R, Cofie, Nathaniel G., , 2007, “Effect of Size of Butt Weld Repaires on Weld Overlay Residual Stresses,” Trans. of ASME PVP conference, PVP2007-26636
- Brust, F. W., Scott, P. M., 2007, “Weld Residual Stresses and Primary Water Stress Corrosion Cracking in Bimetal Nuclear Pipe Welds,” Trans. of ASME PVP Conference, PVP2007-26297
- Special Metals Corporation, 2007, “Inconel 600 Information,” www.specialmetals.com
- Brickstad, B., Josefson, B. L., 1998, “A Parametric Study of Residual Stresses in Multi-Pass Butt-Welded Stainless Steel Pipes,” International Journal of Pressure Vessels and piping, Vol. 75, pp.11-25 https://doi.org/10.1016/S0308-0161(97)00117-8
- Dong, P., 2001, “Residual Stress Analyses of a Multi-Pass Girth Weld: 3-D Special Shell Versus Axisymmetric Models,” ASME Journal of Pressure Vessel Technology, Vol. 123, pp. 207-213 https://doi.org/10.1115/1.1359527
- Elocate, C.D., Dennis, R.J., Bouchard, P.J., Smith, M.C., 2005, “Three Dimensional Multi-Pass Repair Weld Simulations,” International Journal of Pressure Vessels and Piping, Vol. 82, pp. 244-257 https://doi.org/10.1016/j.ijpvp.2004.08.003
- ASME, 2004, “Materials,” ASME Boiler and Pressure Vessel Code, Sec. II, Part D-properties”
- ABAQUS, 2003, “ABAQUS Standard/User's Manual, Version 6.4,” Hibbit Karlsson & Sorensen, Inc
- ASME, 2004, “Welding and Brazing Qualification ,” ASME Boiler and Pressure Vessel Code, Sec. IX
- Song,T.K., Bae,H.Y., Kim, Y.J., Lee, K.S., Park, C.Y., 2008, “Sensitivity Analyses of Finite Element Method for Estimating Residual Stress of Dissimilar Metal Multi-Pass Welding,” Submitted to Transactions of the KSME(A)
- KEPRI,2008,”A FEM Analysis Guideline for Residual Stress in Dissimilar Metal Welds,” KEPRI report
-
Dawling, N. E., 1999, “Mechanical Behavior of Materials,” Prentice Hall,
$2^{nd}$ edition - Leggatt, N. A., Dennis, R., Hurrel, P. R., 2007, “Modeling the Fabrication of a Pressure Vessel Toroidal Seal,” Trans. of ASME PVP Conference, PVP2007-26145
- Dennis, R. J., Leggatt, N. A., Gregg, A., 2006, “Optimisation of Weld Modeling Techniques – Bead on Plate Analysis, Trans. of ASME PVP Conference, PVP2006-ICPVT-11-93907
- Dong, P., Brust, F. W., 2000, “Welding Residual Stresses and Effects on Fracture in Pressure Vessel and Piping Components : A Millennium Review and Beyond,” Journal of Pressure Vessel Technology, Vol. 122, pp. 329-338 https://doi.org/10.1115/1.556189
- Bate, S. K., Warren, A. P., Watson, C. T., Hurrel, P., Francis, J. A., 2007, “UK Research Programme on Residual Stresses–Progress to Date,” Trans. of ASME PVP Conference, PVP2007-26337
- Brust, F. W., Scott, P., 2007, “Primary Water Stress Corrosion Cracking (PWSCC) in Bimetal Nuclear,” Trans. of SMiRT 19 conference, PVP-Vol. 427, pp, 33-39SMiRT 19
- Warren, A. P., Bate, S. K., Hurrell, P., 2007, “The Effect of Modeling Simplification on the Prediction of Residual Stresses in a Multi-Pass Plate Groove Weld,” Trans. of ASME PVP conference, PVP2007-26339
- Hurrell, P. R., Everett, D., Gregg, A., Bate, S., 2006, “Review of Residual Stress Mitigation Methods for Application in Nuclear Power Plant,” Trans. of ASME PVP conference, PVP2006-ICPVT-11-93381
Cited by
- A Study on Machining Effects on Residual Stress at Dissimilar Metal Weld Region vol.29, pp.2, 2011, https://doi.org/10.5781/KWJS.2011.29.2.056
- Stress Distribution in the Dissimilar Metal Butt Weld of Nuclear Reactor Piping due to the Simulation Technique for the Repair Welding vol.37, pp.5, 2013, https://doi.org/10.3795/KSME-A.2013.37.5.649
- Stress Modeling of the Laser Drilling Process in Carbon Steel vol.37, pp.7, 2013, https://doi.org/10.3795/KSME-A.2013.37.7.857
- Investigation into Variations of Welding Residual Stresses and Redistribution Behaviors for Different Repair Welding Widths vol.38, pp.2, 2014, https://doi.org/10.3795/KSME-A.2014.38.2.177
- Effects of Similar Metal Weld on Residual Stress in Dissimilar Metal Weld According to Safe End Length vol.33, pp.7, 2009, https://doi.org/10.3795/KSME-A.2009.33.7.664
- Welding Residual Stress Determination and Crack Analysis in Butt-Welded Thin-Walled Plate by Finite-Element Method vol.34, pp.5, 2010, https://doi.org/10.3795/KSME-A.2010.34.5.589
- Effects on Machining on Surface Residual Stress of SA 508 and Austenitic Stainless Steel vol.35, pp.5, 2011, https://doi.org/10.3795/KSME-A.2011.35.5.543
- Study on Effect of Mechanical Machining and Heat Treatment on Surface Residual Stress of TP316L Stainless Steel vol.35, pp.5, 2011, https://doi.org/10.3795/KSME-A.2011.35.5.453
- Evaluation for Weld Residual Stress and Operating Stress around Weld Region of the CRDM Nozzle in Reactor Vessel Upper Head vol.36, pp.10, 2012, https://doi.org/10.3795/KSME-A.2012.36.10.1235
- Crack Growth Analysis due to PWSCC in Dissimilar Metal Butt Weld for Reactor Piping Considering Hydrostatic and Normal Operating Conditions vol.37, pp.1, 2013, https://doi.org/10.3795/KSME-A.2013.37.1.047
- Finite element analysis and measurement for residual stress of dissimilar metal weld in pressurizer safety nozzle mockup vol.23, pp.11, 2009, https://doi.org/10.1007/s12206-009-0809-2