대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제32권8호
  • /
  • Pages.660-667
  • /
  • 2008
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

열성층 및 냉각재 환경이 오스테나이트 배관의 피로수명에 미치는 영향 평가

Evaluation of Thermal Stratification and Primary Water Environment Effects on Fatigue Life of Austenitic Piping

  • 최신범 (성균관대학교 기계공학부) ;
  • 우승완 (성균관대학교 기계공학부) ;
  • 장윤석 (성균관대학교 기계공학부) ;
  • 최재붕 (성균관대학교 기계공학부) ;
  • 김영진 (성균관대학교 기계공학부) ;
  • 이진호 (한국원자력안전기술원 기계해석실) ;
  • 정해동 (한국원자력안전기술원 기계해석실)
  • 발행 : 2008.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

During the last two decades, lots of efforts have been devoted to resolve thermal stratification phenomenon and primary water environment issues. While several effective methods were proposed especially in related to thermally stratified flow analyses and corrosive material resistance experiments, however, lack of details on specific stress and fatigue evaluation make it difficult to quantify structural behaviors. In the present work, effects of the thermal stratification and primary water are numerically examined from a structural integrity point of view. First, a representative austenitic nuclear piping is selected and its stress components at critical locations are calculated in use of four stratified temperature inputs and eight transient conditions. Subsequently, both metal and environmental fatigue usage factors of the piping are determined by manipulating the stress components in accordance with NUREG/CR-5704 as well as ASME B&PV Codes. Key findings from the fatigue evaluation with applicability of pipe and three-dimensional solid finite elements are fully discussed and a recommendation for realistic evaluation is suggested.

키워드

참고문헌

  1. Kim, J. S., Chang, Y. S., Jin, T. E. and Jeong, I. S., 2000, “Development Processing of Aging Management Programs for Major SSCs of a PWR Plant,” Proceedings of 12th International Conference of Pacific Basin Nuclear Conference
  2. Simonen, F. A., Kaheel, M. A., Phan, H. K., Dedhia, D. O., Kalinousky, D. N. and Shaukat, S. K., 2001, “Evaluation of Environmental Effects on Fatigue Life of Piping,” Nuclear Engineering and Design, Vol. 208, pp. 143-165 https://doi.org/10.1016/S0029-5493(01)00373-9
  3. Jung, I. S., Kim, Y., Youm, H. K. and Park, M. H., 1996, “Thermal Stratification in a Horizontal Pipe of Pressurizer Surge Line,” Korea Society of Mechanical Engineers (KSME) Transaction (B), Vol. 20, No. 4, pp. 1449-1457
  4. Choi, S. K., Kim, S. and Kim, S. O., 2005, “Evaluation of Turbulence Models for Analysis of Thermal Stratification,” Journal of Computational Fluid Engineering, Vol. 10, pp. 12-17
  5. Chang, B. S., Lim, J. S., Lee, S. G., Lee, S. H., Kim, W. B., Yang, S. O., Chung, I. S. and Lee, H. Y., 1996, “Evaluation of PWR Pressurizer Surge Line Integrity for Thermal Stratification,” Proceeding of the Korea Society of Mechanical Engineering (KSME) 1996 Annual Fall Conference
  6. Higuchi, M., 2007, “History of Fatigue Design Criteria and Effects of Mean Stress on Fatigue,” 2007 KEPIC-WEEK, Gyeongju
  7. Pleune, T. T. and Chopra, O. L., 2000, “Using Artificial Neural Networks to Predict the Fatigue Life of Carbon and Low-Alloy Steels,” Nuclear Engineering and Design, Vol. 197, pp. 1-12 https://doi.org/10.1016/S0029-5493(99)00252-6
  8. Higuchi, M., 2004, “Revised Proposal of Fatigue Life Correction Factor Fen for Carbon and Low Alloy Steels in LWR Water Environment,” Journal of Pressure Vessel Technology, Vol. 126, pp. 438-444 https://doi.org/10.1115/1.1767860
  9. Jeong, I. S., Ha, G. H., Kim, T. R. and Jeon, H. I., 2008, “Characteristics of the Cycle Hardening in Low Cycle Environmental Fatigue Test of CF8M Stainless Steel,” Korea Society of Mechanical Engineers (KSME Transaction (A), Vol. 32, No. 2, pp. 177-185 https://doi.org/10.3795/KSME-A.2008.32.2.177
  10. KINS, 2007, “Temperature Input at Surge Line of PWR,” Private Communication
  11. ANSYS, 2004, “Introduction of ANSYS.”
  12. KINS, 2007, “Fatigue Life Analysis of Surge Line and Branch Line of Kori Unit 1,” KINS/HR-827
  13. American Society of Mechanical Engineers, 1992, “ASME B&PV Code Sec. II – Materials,” ASME Boiler and Pressure Vessel Code
  14. DST Computer Service, 2004, “PIPESTRESS Theory manual.”
  15. SDRC Korea, 2000, “I-DEAS Assembly Design.”
  16. Jhung, M. J. and Choi, Y. H., 2008, “Stress Analysis of Surge Line for Thermal Stratification,” 1st ANSYS Workshop, Muju Resort
  17. American Society of Mechanical Engineers, 1998, “ASME B&PV Code Sec. III Appendix. I Design Stress Intensity Values, Allowable Stresses, Material Properties and Design Fatigue Curves,” ASME Boiler and Pressure Vessel Code
  18. U.S. Nuclear Regulatory Commission, 1995, “Application of NUREG/CR-5999 Interim Fatigue Design Curves to Selected Nuclear Power Plant Components,” NUREG/CR-6260
  19. U.S. Nuclear Regulatory Commission, 1999, “Effects of LWR Coolant Environments on Fatigue Design Curves of Austenite Stainless Steels,” NUREG/CR-5704
  20. U.S. Nuclear Regulatory Commission, 1998, “Effect of LWR Coolant Environments on Fatigue Design Curves of Carbon and Low Alloy Steels,” NUREG/CR-6583
  21. U.S. Nuclear Regulatory Commission, 2007, “Guidelines for Evaluation Fatigue Analyses Incorporating the Life Reduction of Metal Components due to the Effects of the Light-Water Reactor Environment for New Reactors,” U.S. NRC Regulatory Guide 1.207
  22. The Japan Society of Mechanical Engineers, 2006, “Environmental Fatigue Design Method for Nuclear Power Plants,” JSME S NF1-2006
  23. Higuchi, M., 2007, “Standardization of Fatigue Damage Evaluation Method in LWR Water Environments,” 2007 KEPIC-WEEK, Gyeongju