References
- Larminie, J. and Dicks, A., 2003, “Fuel Cell System Explained, Second Edition,” John Wiley & Sons, pp. 229-279
- Kang, I. and Bae, J.-M., 2006, “Autothermal Reforming Study of Diesel for Fuel Cell Application,” J. Power Source, Vol. 159, No. 2, pp. 1283-1290 https://doi.org/10.1016/j.jpowsour.2005.12.048
- Tsuru, T., Yamaguchi, K., Yoshioka, T. and Asaeda, M., 2004, “Methane Steam Reforming by Microporous Catalytic Membrane Reactors,” J. AIChE, Vol. 50, No. 11, pp. 2794-2805 https://doi.org/10.1002/aic.10215
- Choi, Y. and Stenger, H. G., 2005, “Kinetics, Simulation and Optimization of Methanol Steam Reformer for Fuel Cell Application,” J. Power Source, Vol. 142, No. 2, pp. 81-91 https://doi.org/10.1016/j.jpowsour.2004.08.058
- CD Adapco Group, 2004, “STAR-CD Methodology,” CD adapco Group, pp. 1-1-1-7
- Hoang, D. L. and Chan, S. H., 2004, “Modeling of a Catalytic Autothermal Methane Reformer for Fuel Cell Applications,” Appl. Catal., Vol. 268, No. 1/2, pp. 207-216 https://doi.org/10.1016/j.apcata.2004.03.056
- Seo. Y.-S., Seo, D.-J., Seo, Y.-T and Yoon, W.-L., 2006, “Investigation of the Characteristics of a Compact Steam Reformer Integrated with a Water-Gas Shift Reactor,” J. Power Source, Vol. 161, No. 2, pp. 1208-1216 https://doi.org/10.1016/j.jpowsour.2006.05.039
- Niven, R. K., 2002, “Physical Insight nto the Ergun and Wen&Yu Equations for Fluid Flow in Packed and Fluidized Beds,” J. of Chemical Engineering Science, Vol. 57, No. 3, pp. 527-534 https://doi.org/10.1016/S0009-2509(01)00371-2
- Lee, S., Bae, J., Lim, S and Park, J., 2008, “Improved Configuration of Supported Nickel Catalysts in a Steam Reformer for Effective Hydrogen Production from Methane,” J. Power Source, Vol. 180, No. 8, pp. 506-515 https://doi.org/10.1016/j.jpowsour.2008.01.081
- Hoang, D. L., Chan, S. H. and Ding, O. L., 2005, “Kinetic and Modeling Study of Methane Steam Reforming Over Sulfide Nickel Catalyst on a Gamma Alumina Support,” Chemical Engineering J., Vol 112, No. 1/3, pp. 1-11 https://doi.org/10.1016/j.cej.2005.06.004
- Ma, L., Trimm, D. L. and Jiang, C., 1996, “The Design and Testing of an Autothermal Reactor for the Conversion of Light Hydrocarbons to Hydrogen I. The Kinetics of the Catalytic Oxidation of Light Hydrocarbons,” Appl. Catal., Vol. 138, No. 2, pp. 275-283 https://doi.org/10.1016/0926-860X(95)00301-0
- Xu, J. and Froment, G. F., 1989, “Methane Steam Reforming, Methanation and Water-gas Shift I. Intrinsic Kinetics,” J. of AiChE., Vol. 35, No. 1, pp. 88-96 https://doi.org/10.1002/aic.690350109
- Lee, S., Lim, S. and Bae, J., 2006, “Heat and Mass Transfer Characteristics in Steam Reforming Reactor,” J. KSNRE, Vol. 2, No. 4, pp. 56-63
- Hoang, D. L., Chan, S. H. and Ding, O. L., 2005, “Kinetic and Modeling Study of Methane Steam Reformer over Sulfide Nickel Catalyst on a Gamma Alumina Support,” Chemical Engineering J., Vol. 112, No. 1/3, pp.1-11 https://doi.org/10.1016/j.cej.2005.06.004
- Misson, R. W., Mims, C. A. and Saville, B. A., 1999, “Introduction to Chemical Reaction Engineering and Kinetics,” Department of Chemical Engineering and Applied Chemistry, University of Toronto, USA
- Ahmed, S. and Krumpelt, M., “Hydrogen from Hydrocarbon Fuels for Fuel Sells,” Int. J. Hydrogen Energy, Vol. 26, No. 4, pp. 291-301 https://doi.org/10.1016/S0360-3199(00)00097-5
Cited by
- Thermal Flow Analysis of Operating Parameters in Autothermal Reformer vol.14, pp.6, 2011, https://doi.org/10.5293/kfma..2011.14.6.061
- Numerical Analysis of New Proposals to Enhance Heat Transfer in MCFC'S Preconverter vol.37, pp.8, 2013, https://doi.org/10.3795/KSME-B.2013.37.8.753
- Numerical Study on the Performance and the Heat Flux of a Coaxial Cylindrical Steam Reformer for Hydrogen Production vol.33, pp.9, 2009, https://doi.org/10.3795/KSME-B.2009.33.9.709